Siloxane
Mostrando 1-12 de 34 artigos, teses e dissertações.
-
1. Behavior of plaster with water-repellent additive under natural aging
Abstract This research evaluates the behavior of plaster with a water-repellent additive when submitted to a natural aging process. Casting plaster and silane/siloxane-based water-repellent were used as materials. The water/plaster ratio was set at 0.7 and the contents of 0.2% and 0.4% of water-repellent were used, in relation to the plaster mass. Plaster pa
Cerâmica. Publicado em: 2022
-
2. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
3. Tank mixture of pesticides and foliar fertilizers for Triozoida limbata control in guava trees (Psidium guajava L.)
ABSTRACT Although tank mixture of pesticides and foliar fertilizers is common practice in agriculture, further clarification and scientific evidence is needed to support regulation. Thus, the objective of this work was to evaluate the effect of tank mixing an organosilicon adjuvant and manganese foliar fertilizer on the insecticide imidacloprid effectiveness
Rev. Ceres. Publicado em: 03/10/2019
-
4. Effect of Self-Etching Primer Associated to Hydrofluoric acid or Silane on Bonding to Lithium Disilicate
Resumo Avaliar o efeito da combinação de ácido fluorídrico ou silano com o primer autocondicionante de cerâmicas sobre a eficácia da união imediata e após 1 ano de armazenamento em água, padrão de condicionamento e interação química desses tratamentos com o dissilicato de lítio. Um total de 16 blocos CAD/CAM de dissilicato de lítio (DL) foram
Braz. Dent. J.. Publicado em: 04/04/2019
-
5. The marginal fit of lithium disilicate crowns: Press vs. CAD/CAM
Abstract: This study aimed to compare the vertical marginal gap of teeth restored with lithium disilicate crowns fabricated using CAD/CAM or by pressed ceramic approach. Twenty mandibular third molar teeth were collected after surgical extractions and prepared to receive full veneer crowns. Teeth were optically scanned and lithium disilicate blocks were used
Braz. oral res.. Publicado em: 22/01/2018
-
6. Revestimentos de alta camada obtidos com a modificação de resinas epóxi novolaca pela reação com organo-siloxano e catálise ácida
Epoxy resins are an important class of thermostable polymers, widely used in structural applications or as adhesives. However, the low fracture resistance is their main weakness in many applications. Due to this fact, this study aims to modify a polymer matrix based on a novolac epoxy resin with an organo siloxane (AMS). The final properties of cured epoxys
Quím. Nova. Publicado em: 2017-02
-
7. Marginal and internal fit of zirconia copings obtained using different digital scanning methods
Abstract The objective of this study was to evaluate the marginal and internal fit of zirconia copings obtained with different digital scanning methods. A human mandibular first molar was set in a typodont with its adjacent and antagonist teeth and prepared for an all-ceramic crown. Digital impressions were made using an intraoral scanner (3Shape). Polyvinyl
Braz. oral res.. Publicado em: 10/10/2016
-
8. Effect of Tetraethoxy-silane (TEOS) Amounts on the Corrosion Prevention Properties of Siloxane-PMMA Hybrid Coatings on Galvanized Steel Substrates
Siloxane-poly(methyl methacrylate) (PMMA) organic-inorganic hybrid coatings were deposited on galvanized steel by the dip-coating sol-gel technique. Anticorrosion properties, as well as the morphological, surface and structural features were studied. Hybrid coatings were synthesized from tetraethoxy-silane (TEOS) and methyl methacrylate (MMA) as inorganic an
Mat. Res.. Publicado em: 04/12/2015
-
9. Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids
Tinplate is used to food packaging and other types of packages. The corrosion resistance of the tinplate has been study due the necessity of an alternative to high environmental impact of chromatization process. Therefore protective coatings as hybrid films base elaborations with different acids are studied to improve the barrier effect against corrosion. Th
Mat. Res.. Publicado em: 2015-02
-
10. Dimensional stability of a novel polyvinyl siloxane impression technique
AIM: To introduce a modification of the reline impression technique (MRIT), and compare the dimensional changes of impressions obtained by MRIT and by conventional reline impression technique (CRIT). METHODS: An acrylic resin tablet was milled by a CAD-CAM system to simulate three abutments (A, B and C) with different distances among them. The abutment
Braz. J. Oral Sci.. Publicado em: 2014-04
-
11. Effect of different disinfecting procedures on the hardness and color stability of two maxillofacial elastomers over time
Objective Disinfection procedures often cause deterioration in a maxillofacial prosthesis. Color and hardness alterations could lead to a replacement of the prosthesis. Material and Methods An experimental chlorinated polyethylene (CPE) and a commercial polydimethyl siloxane (PDMS) sample were treated with four different disinfection procedures for a perio
J. Appl. Oral Sci.. Publicado em: 2013-06
-
12. Internal fit of two all-ceramic systems and metal-ceramic crowns
OBJECTIVES: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. MATERIAL AND METHODS: Sixty standardized resin-tooth replicas of a maxillary first molar were produced for
Journal of Applied Oral Science. Publicado em: 2012-04