Silicon Particles
Mostrando 1-12 de 64 artigos, teses e dissertações.
-
1. Mix design formulation range for metakaolin-based geopolymer synthesis
Abstract This article presents a range of mix design formulations to obtain metakaolin-based geopolymer synthesis. Geopolymer samples were synthesized from metakaolin, a 10 M sodium hydroxide solution, and alkaline sodium silicate. These three components were mixed in different proportions to form a paste which was molded in a cylindrical shape, set at room
REM - International Engineering Journal. Publicado em: 2022
-
2. Magnetic and Mesoporous Silica-Niobia Material as Modifier of Carbon Paste Electrode for p-Nitrophenol Electrochemical Determination
In the present work, the sol-gel synthesis method was employed as strategy to obtain a magnetic and mesoporous silica-niobia material. The planned synthesis was based on the hetero-condensation of niobium and silicon alkoxide precursors, in the presence of spherical magnetite particles. The resulting material presented interesting characteristics such as mag
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
3. Corrosion Investigation of Stir Cast Zn-27Al Based Hybrid Composites Reinforced with Quarry Dust and Silicon Carbide Particles
This paper investigates the corrosion behaviour of Zn-27Al based hybrid composites reinforced with quarry dust (QD) and silicon carbide particles (SiCp). The Zn-27Al hybrid composites containing 8 wt% and 10 wt% SiCp-QD particles reinforcement with varied weight percentage of 0, 25, 50, 75 and 100% quarry dust respectively were synthesized using stir casting
Mat. Res.. Publicado em: 13/05/2019
-
4. Rheo-Squeeze Casting of High-Silicon Aluminium Alloy Pipes with Gradient Structures and Their Mechanical Properties
Three different compositions of high-Si Al alloy pipe, with a gradient structure, were produced through semi-solid rheological squeeze casting, the microstructural characteristics of which were investigated. The mechanism of gradient structure formation and the effect of acicular Fe-rich phases on liquid segregation were revealed. Meanwhile, the crystal stru
Mat. Res.. Publicado em: 11/06/2018
-
5. Dry Sliding Wear Behaviour of Aluminium 5059/SiC/MoS2 Hybrid Metal Matrix Composites
The present study is to investigate the influence of weight percentage of silicon carbide (SiC) (5,10 %, 15%) and particle size (10,20,40µm) of SiC and constant 2% of Molybdenum disulphide(MoS2)is reinforced with aluminium matrix. Wear performance of the composite was carried out through pin-on-disc method to calculate friction coefficient and wear resistan
Mat. Res.. Publicado em: 28/09/2017
-
6. Macrosegregation of Impurities in a Metallurgical Silicon Ingot After Transient Directional Solidification
Metallurgical grade silicon was melted and directionally solidified in transient conditions by extracting heat from the base of a cylindrical ingot and inserting heat at the ingot top. A heat-transfer mathematical model was implemented to predict the solidification velocity and temperature gradient using cooling curves measured directly in the silicon melt.
Mat. Res.. Publicado em: 26/06/2017
-
7. Clays for Brick Manufacturing in Actopan, Hidalgo: Physical, Chemical and Mineralogical Characterization
Samples of clays from Actopan, Hidalgo employed in brick manufacturing are physical, chemical and mineralogical characterized. Transmitted polarized light microscopy showed a uniform particle size with grain morphology characteristic of euhedral crystals with quartz, feldspars, nontronite, and iron oxides particles. Scanning Electron Microscopy revealed 75 �
Mat. Res.. Publicado em: 11/05/2017
-
8. Mechanical and Corrosion Behavior of Al7075 (Hybrid) Metal Matrix Composites by Two Step Stir Casting Process
Abstract This paper investigates the mechanical properties and corrosion behavior of Metal Matrix Composites prepared using Al7075 alloy as a matrix, Silicon Carbide and Titanium Carbide as reinforcement particles. Two step stir casting process was used to fabricate the composites by varying volume fractions of Silicon Carbide and Titanium Carbide (0 to 15 v
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
9. The effect of standardised implantoplasty protocol on titanium surface roughness: an in-vitro study
Abstract: To analyse the changes of surface characteristics of machined and moderately roughened titanium disks following a standardised implantoplasty protocol. Forty titanium discs (machined: n = 20; moderately roughened: n = 20) were instrumented with one half of each disc maintained as the control (non-instrumented). The standardised implantoplasty proto
Braz. oral res.. Publicado em: 22/12/2016
-
10. Growth and Characterization of Graphene on Polycrystalline SiC Substrate Using Heating by CO2 Laser Beam
The thermal decomposition of silicon carbide (SiC), with the subsequent formation of graphene, can be achieved by heating treatment. Several heating processes have been applied for this purpose by using SiC, either in form of powder particles or monocrystalline substrate. In this work, instead of using an expensive commercially available SiC wafer, a polycry
Mat. Res.. Publicado em: 26/09/2016
-
11. Characterisation and microleakage of a new hydrophilic fissure sealant - UltraSeal XT® hydro™
ABSTRACT Objectives The aim of this study was to characterise the new hydrophilic fissure sealant, UltraSeal XT® hydro™ (Ultradent Products, USA), and to investigate its in vitro resistance to microleakage after placement on conventionally acid etched and sequentially lased and acid etched molars. Material and Methods The sealant was characterised by
J. Appl. Oral Sci.. Publicado em: 2016-08
-
12. Complex permeability and permittivity variation of radar absorbing materials based on MnZn ferrite in microwave frequencies
The complex dielectric permittivity (ε) and magnetic permeability (µ) of Radar Absorbing Materials (RAM) based on magnetic particles (MnZn ferrite particles) embedded in a dielectric matrix (silicon rubber) have been studied in the frequency range of 2 to 18 GHz. The relative permeability and permittivity of MnZn ferrite-silicon composites for various mass
Mat. Res.. Publicado em: 21/05/2013