Silicon Oxide
Mostrando 1-12 de 69 artigos, teses e dissertações.
-
1. Evaluation of the self-healing capacity of ceramics produced with alumina and silicon carbide
Abstract The self-healing capacity of a ceramic material produced by uniaxial pressing with alumina (Al2O3), silicon carbide (SiC), and magnesium oxide (MgO) was evaluated. To assess self-healing, a discontinuity was generated on the surface of the specimens. The healing time in the oven, at a temperature of 1000 ºC, was 1, 30, and 60 min. The specimens wer
Cerâmica. Publicado em: 2022
-
2. Adsorption of Calcium(II), Cadmium(II) and Copper(II) Ions from Water by Prepared Silicon-Aluminum-Zirconium Oxide Using Sol-Gel Process
Ternary oxide silica-alumina-zirconia (SiO2/Al2O3/ZrO2) obtained by the sol-gel process was applied as novel adsorbent of ions in aqueous solution. Batch isotherms were performed using standard CuII, CdII and CaII solutions at variable pH and different concentrations. Adsorption capacity was best at weakly acidic pH. The maximum adsorption capacities were 2.
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
3. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
4. CHARACTERIZATION OF SILICON-ALUMINUM-ZIRCONIUM OXIDE OBTAINED BY THE SOL-GEL PROCESS
A new silicon-aluminum-zirconium ternary oxide (SiO2/Al2O3/ZrO2) was prepared by the sol-gel method followed by one-step washing with absolute ethanol or two-step washing with absolute ethanol followed by ultra-pure water. Both ternary oxides presented high surface area (over 340 m2 g-1). The binding energy values for Zr3d and Al2p levels showed the insertio
Quím. Nova. Publicado em: 18/07/2019
-
5. Study of the Nb2O5 Insertion in ZnO to Dye-sensitized Solar Cells
Dye-sensitized solar cells (DSSC) have received much attention as an alternative to silicon-based solar cells, due to various advantages. Zinc oxide (ZnO) is an n-type semiconductor employed as photoanode on DSSC. The decrease of charge recombination is an efficient strategy capable of improving the photovoltaic performance of the device. In this perspective
Mat. Res.. Publicado em: 01/07/2019
-
6. Thermomechanical Characteristics of a Functionally Graded Mounted Uniform Disc with/without Rigid Casing
ABSTRACT In the present paper, thermomechanical attributes of a power-law graded uniform mounted disc with or without rigid casing are investigated analytically under centrifugal and steady-state thermal loads within the framework of axisymmetric infinitesimal plane-stress elasticity theory. Young's modulus, material density, thermal expansion coefficient an
J. Aerosp. Technol. Manag.. Publicado em: 13/06/2019
-
7. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018
-
8. Use of SnOx:F in the Recycling of Silicon Solar Cells
Amongst the many parts of a silicon cells photovoltaic module, silicon is the most important and expensive constituent. Thus, research on silicon recycling from damaged cells can lead to economic and environmental benefits. In this work, the broken silicon cells were tailored to function along with the fluorine-doped tin oxide as the transparent electric con
Mat. Res.. Publicado em: 22/01/2018
-
9. Annealing effects on the structural and optical properties of vanadium oxide film obtained by the hot-filament metal oxide deposition technique (HFMOD)
ABSTRACT Vanadium oxide films amorphous, nonstoichiometric and highly absorbing in the optical region were deposited on ITO-coated glass and on silicon substrates, by the hot-filament metal oxide deposition technique (HFMOD) and oxidized by ex-situ annealing in a furnace at 200, 300, 400 and 500 ºC, under an atmosphere of argon and rarefied oxygen. X-ray di
Matéria (Rio J.). Publicado em: 11/05/2017
-
10. Properties of SiC Ceramics Sintered via Liquid Phase Using Al2O3 + Y2O3, Al2O3 + Yb2O3 and Al2O3 + Dy2O3 as Additives: a Comparative Study
Silicon carbide (SiC) ceramics show excellent performance at high temperatures. Due to the high covalence of Si-C bonds, these ceramics are produced successfully only via liquid phase sintering (LPS). In this work, SiC ceramics were sintered via LPS using eutectic mixtures of Al2O3+Y2O3, which served as a standard for comparison, Al2O3+Yb2O3 and Al2O3+Dy2O3.
Mat. Res.. Publicado em: 2015-06
-
11. Facile Graphene Oxide Preparation by Microwave-Assisted Acid Method
Few-layered graphene oxide (GO) was prepared using a fast and energy-saving method by microwave-assisted acid technique. The oxygenated groups existing on the GO surface were determined using UV-Vis, X-ray photoelectron and Fourier-transform infrared spectroscopies. An oxygenated group percentage of 30% in mass for the GO was observed by thermogravimetric an
J. Braz. Chem. Soc.. Publicado em: 2015-05
-
12. Evaluation of piezoresistivity properties of sputtered ZnO thin films
Zinc oxide (ZnO) thin films were deposited by RF reactive magnetron sputtering on silicon (100) substrates under different experimental conditions. ZnO films were studied before and after annealing treatment at 600 °C. The crystallinity, electrical resistivity, stoichiometry, thickness, and elastic modulus of the films were investigated. ZnO piezoresistors
Mat. Res.. Publicado em: 03/06/2014