Silicon Nitride
Mostrando 1-12 de 47 artigos, teses e dissertações.
-
1. Thermomechanical Characteristics of a Functionally Graded Mounted Uniform Disc with/without Rigid Casing
ABSTRACT In the present paper, thermomechanical attributes of a power-law graded uniform mounted disc with or without rigid casing are investigated analytically under centrifugal and steady-state thermal loads within the framework of axisymmetric infinitesimal plane-stress elasticity theory. Young's modulus, material density, thermal expansion coefficient an
J. Aerosp. Technol. Manag.. Publicado em: 13/06/2019
-
2. Densification and microstructure of Si3N4-TiN ceramic composites
Abstract Silicon nitride is a ceramic material widely used in various structural applications at high temperatures owing to its excellent combination of mechanical and thermal properties. To increase the application of Si3N4, many researches have been developed to improve its fracture toughness and processing conditions. In this study, the sintering and micr
Cerâmica. Publicado em: 2019-01
-
3. Microstructure, Mechanical Properties and in vitro Biological Behavior of Silicon Nitride Ceramics
The bioinert surface of silicon nitride ceramics led us to investigate the additions of SiO2, CaO and Al2O3 in order to aid the liquid phase sintering and improve the mechanical properties and biological behavior of the final materials. The sintered materials reached ca. 97% of theoretical density and total α→β-Si3N4 transformation. The samples had relat
Mat. Res.. Publicado em: 13/09/2018
-
4. Mechanical Loss Angle Measurement for Stressed thin Film Using Cantilever Ring-Down Method
Mechanical loss of the coating materials, and hence thermal noise from the mirror coatings, is a limiting factor for the sensitivity of the laser interferometer gravitational waves detector at its most sensitive frequency range. Mechanical loss of the thin films are often measured using the cantilever ring-down method. But when the thin film is under stress,
Mat. Res.. Publicado em: 28/05/2018
-
5. Investigation on Friction and Wear Properties of High-Temperature Bearing Steel 9Cr18Mo
This paper presented a study of friction and wear on 9Cr18Mo when rubbed against other materials (steel-304, steel-440C, steel-GCr15 or silicon nitride ceramic ball) at high temperature conditions. Friction and wear tests were carried out with universal a friction and wear testing machine. The wear morphology was analyzed by a Nanovea three-dimensional profi
Mat. Res.. Publicado em: 05/04/2018
-
6. Electrochemical Behavior of Titanium Nitride Thin Films Deposited on Silicon by Plasma Discharge Technique in Cathodic Cage
Titanium nitride films were deposited on silicon by plasma discharge in cathodic cage with holes and without holes on the sides. Each film was deposited with a pressure of 253 Pa, treatment time of 2 h, and at diverse conditions of temperature and gas flow of N2 and H2. The electrochemical polarization and electrochemical impedance techniques were used to un
Mat. Res.. Publicado em: 22/08/2016
-
7. Structural and Mechanical Properties of Zr-Si-N Thin Films Prepared by Reactive Magnetron Sputtering
Zirconium silicon nitride (ZrSiN) thin films were deposited by reactive magnetron sputtering in order to verify the silicon influence on coating morphology and mechanical properties. The Si/(Zr+Si) ratio was adjusted between 0 to 15% just modifying the power applied on the silicon target. Only peaks associated to ZrN crystalline structure were observed in XR
Mat. Res.. Publicado em: 23/10/2015
-
8. Study of indium nitride and indium oxynitride band gaps
This work shows the study of the optical band gap of indium oxynitride (InNO) and indium nitride (InN) deposited by magnetron reactive sputtering. InNO shows multi-functionality in electrical and photonic applications, transparency in visible range, wide band gap, high resistivity and low leakage current. The deposition processes were performed in a magnetro
Mat. Res.. Publicado em: 07/05/2013
-
9. Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+
In this work we compared the antireflection coatings of titanium dioxide and silicon nitride for p+nn+ solar cell fabrication. This type of solar cell is more stable in the long term compared to n+pp+ cells and allows obtaining higher efficiencies. TiO2 films were produced by evaporation in high vacuum by electron beam and by chemical vapor deposition at atm
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/12/2012
-
10. Texturização da superfície de silício monocristalino com NH4OH e camada antirrefletora para aplicações em células fotovoltaicas compatíveis com tecnologia CMOS = : Texturing the surface of monocrystalline silicon with NH4OH and anti-reflective coating for applications in photovoltaic cells compatible with CMOS technology / Texturing the surface of monocrystalline silicon with NH4OH and anti-reflective coating for applications in photovoltaic cells compatible with CMOS technology
Este trabalho apresenta o desenvolvimento de células fotovoltaicas de junção n+/p em substratos de Si com processos de fabricação totalmente compatíveis com a tecnologia CMOS (Complementary Metal Oxide Semiconductor). Os processos compatíveis desenvolvidos neste trabalho sao as técnicas: i) de texturização da superfície do Si, com reflexao da supe
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/08/2012
-
11. Caracterização de propriedades mecânicas de materiais utilizados em microssistemas eletromecânicos / Mechanical properties characterization of materials used in micro-electro mechanical systems
A caracterização das propriedades mecânicas de filmes finos faz-se necessária para o projeto e fabricação de Microsistemas Eletromecânicos (MEMS - Micro-Electro-Mechanical Systems), que demanda dados precisos dos materiais. Esta pesquisa descreve um novo método de caracterização das propriedades mecânicas de filmes finos, barato e aplicávela uma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/07/2012
-
12. Ultra baixo coeficiente de atrito no deslizamento de Si3N4-Al2O3. Efeitos da força aplicada, velocidade de deslizamento e temperatura do ensaio. / Ultra low friction coefficient in sliding of Si3N4-Al2O3. Effects of applied load, sliding velocity and test temperature.
Tribological tests were conducted in a ball on disk setup, using water as lubricant. Were used a silicon nitride ball and alumina disk. The tests were conducted to investigate the effects of sliding speed, applied load and temperature on friction coefficient. The silicon nitride balls and alumina disks were characterized by determining density, Vickers hardn
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012