Silicates
Mostrando 1-12 de 90 artigos, teses e dissertações.
-
1. Use of rice husk ash to produce alternative sodium silicate for geopolymerization reactions
Abstract This study investigated the feasibility of synthesizing sodium silicate from rice husk ash (RHA) and its application to produce geopolymers. Samples were prepared at different SiO2/Al2O3 molar ratios (3.0, 3.5, and 4.0) for both sodium silicates (commercial and from RHA). They were underwater cured at 60 ºC for 1 h and then at room temperature (25
Cerâmica. Publicado em: 2021-03
-
2. Reordering of Depolymerized Silicates as Adsorbents for Large Nitrogen Compounds
The adsorption capacities of two synthesized zeolites (crystalline ZSM-5 and semi-crystalline faujasite Y) for a mixture of indole, quinoline and carbazole were studied. The different samples obtained show different crystalline degree, mesoporosity and Si/Al ratios. The synthesis procedure is based on the simultaneous depolymerization of a mixture of high su
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
3. Influence of Mn2+ ions on depression of quartz and spessartine in gondite ore
Abstract Low-grade manganese ores that are composed of manganese oxides, wad, quartz, iron oxides, gibbsite, and especially of spessartine (Mn3Al2(SiO4)3) are known as gondite. Spessartine is a mineral with a high content of silica (SiO2) and alumina (Al2O3) that causes a decrease of the enrichment in manganese oxide concentrates by flotation, giving this o
REM, Int. Eng. J.. Publicado em: 2021-01
-
4. Influência da incorporação da HAp e β-TCP no cimento ósseo wollastonita/brushita
RESUMO O elevado número de pacientes com problemas de saúde por doenças ósseas ou traumas tem promovido o desenvolvimento de pesquisas em biomateriais de modo a garantir uma melhor qualidade de vida. Dentre os diversos biomateriais, os cimentos ósseos poliméricos (PMMA) ou cerâmicos (fosfatos e silicatos de cálcio) destacam-se para aplicações em ci
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Occurrence of rice blast on and grain quality of irrigated rice fertilized with nitrogen and silicates
Resumo: O objetivo deste trabalho foi avaliar os efeitos da adubação com nitrogênio em cobertura e silicatos, bem como da utilização de fungicidas, sobre a ocorrência de brusone nas panículas, a renda do benefício e os grãos inteiros, vítreos e gessados, em cultivar de arroz irrigado por inundação sensível à doença. Foram conduzidos dois exper
Pesq. agropec. bras.. Publicado em: 29/08/2019
-
6. Provenance of the Ediacaran Salinas Formation (Araçuaí Orogen, Brazil): Clues from lithochemical data and zircon U-Pb (SHRIMP) ages of volcanic clasts
Abstract Salinas Formation occurs in a large region of the Northern Araçuaí orogen, Southeastern Brazil. It includes turbiditic wackes (> 10% matrix) to arenites (< 10% matrix), pelites and clast-supported conglomerates, metamorphosed from the biotite zone of the greenschist facies to the sillimanite zone of the amphibolite facies. Salinas Formation lies u
Braz. J. Geol.. Publicado em: 01/07/2019
-
7. Morpho-physiological changes in Billbergia zebrina due to the use of silicates in vitro
Abstract The use of silicon in Billbergia zebrina cultivation in vitro is an alternative for optimizing micropropagation of this important ornamental plant species. The objective of the present study was to evaluate the growth and anatomical and physiological alterations in Billbergia zebrina (Herbert) Lindley plants as a function of different sources and co
An. Acad. Bras. Ciênc.. Publicado em: 18/10/2018
-
8. Characterization of iron ore pellets by multimodal microscopy and image analysis
Abstract A correlative approach employing optical microscopy and scanning electron microscopy is proposed for the quantification of phases and pores in iron ore pellets. Combining mosaic images covering the full cross-sections of pellets, obtained with both techniques, it is possible to improve the discrimination of pores, quartz and silicates. First, the im
REM, Int. Eng. J.. Publicado em: 2018-04
-
9. Chemical and mineralogical characterization of silicon manganese iron slag as railway ballast
Abstract In nature, metal ores such as iron, lead, aluminum and others are found in an impure state, sometimes oxidized and mixed with silicates of other metals. During casting, when the ore is exposed to high temperatures, these impurities are separated from the molten metal and can be removed. The mass formed by these compounds is slag. Slag is the co-prod
REM, Int. Eng. J.. Publicado em: 2017-12
-
10. Lime and calcium-magnesium silicate in the ionic speciation of an Oxisol
ABSTRACT Plant residues and certain fertilizers accelerate soil acidification and increase the levels of aluminum-Al+3 in soils under no-tillage (NT). Silicates act as acidity amendments and as a source of silicon as in H4SiO4. An increase in the pH of soil solution causes the deprotonation of H4SiO4 and generates the anionic form (H3SiO4−). The aim of thi
Sci. agric. (Piracicaba, Braz.). Publicado em: 2017-08
-
11. Characterization of basic oxygen furnace slag and granite waste mixtures to Portland cement production
Abstract The aim of this paper is to analyze mixtures of basic oxygen furnace slag and granite waste in order to produce Portland cement. X-ray patterns were carried out in both the basic oxygen furnace slag and granite waste. Then, mixtures were prepared to obtain the binary basicity of 0.5, 0.9 and 1.2. The mixtures were melted at 1500ºC. Two cooling step
REM, Int. Eng. J.. Publicado em: 2016-12
-
12. HÍBRIDOS DE QUITOSANA-ARGILA PARA ENCAPSULAMENTO E LIBERAÇÃO SUSTENTADA DO FERTILIZANTE NITRATO DE POTÁSSIO
The use of controlled release fertilizers is a trend for improving productivity, reducing costs and environmental pollution. Such materials release gradually the nutrients to the plant in order to supply its requirement and are an alternative to improve fertilization. The preparation of a microsphere from natural materials (chitosan and montmorilonite clay)
Quím. Nova. Publicado em: 2016-12