Silane
Mostrando 1-12 de 133 artigos, teses e dissertações.
-
1. Behavior of plaster with water-repellent additive under natural aging
Abstract This research evaluates the behavior of plaster with a water-repellent additive when submitted to a natural aging process. Casting plaster and silane/siloxane-based water-repellent were used as materials. The water/plaster ratio was set at 0.7 and the contents of 0.2% and 0.4% of water-repellent were used, in relation to the plaster mass. Plaster pa
Cerâmica. Publicado em: 2022
-
2. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
3. Hybrid Hydrogels Based on Polyethylene Glycol Bioconjugated with Silylated-Amyloidogenic Peptides
Hybrid-peptide hydrogel arrangements are a promising alternative to obtaining biocompatible structures at the nanoscopic scale. In this work, a new class of hybrid hydrogels was obtained through the sol-gel process based on the reaction between an amyloid-like octapeptide sequence [RF]4 (where R = arginine and F = phenylalanine) covalently bonded with glycin
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
4. SYNTHESIS, CHARACTERIZATION AND EVALUATION OF THE HETEROGENEOUS BASIC CATALYST DAPTS-MCM-41 IN THE INTERESTERIFICATION REACTION OF PALM OIL AND PALM KERNEL OIL BLENDS
Abstract In recent years, the replacement of homogeneous catalysts by heterogeneous catalysts has been investigated as a sustainable alternative technology to obtain different products. In this context, this study investigated the activity of the heterogeneous catalyst DAPTS-MCM-41, obtained from the reaction between the MCM-41 molecular sieve and an organic
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
5. Effect of Hydrofluoric Acid Concentration and Thermal Cycling on the Bond Strength of Brackets to Ceramic
Resumo Este estudo avaliou os efeitos de diferentes concentrações de ácido hidrofluorídrico (HF) e ciclagem térmica na resistência de união ao cisalhamento (RUC) de bráquetes metálicos a cerâmica. Cilindros da cerâmica feldspática foram divididos em 10 grupos (n=15). De acordo com as concentrações do ácido HF: 1-1%;2-2,5%;3-5%;4-7,5%; e, 5-10%
Braz. Dent. J.. Publicado em: 28/11/2019
-
6. Digital smile designing, pressing and stratifying ceramic lithium disilicate veneers to rehabilitate dental agenesis: a clinical report
RESUMO Este é um relato de caso de reabilitação estética anterior com facetas laminadas dos elementos 14 ao 24 confeccionadas com a cerâmica IPSE.max Ceram (Ivoclar -Vivadent), as quais substituíram facetas de resina composta insatisfatórias dos elementos 13 ao 23. Ressalta-se que o paciente possuía agenesia dos elementos 12 e 22, tornando-se necess�
RGO, Rev. Gaúch. Odontol.. Publicado em: 28/10/2019
-
7. Glass fiber post treatment – does it influence resin cement bond strength?
Resumo Introdução Pinos de fibra de vidro são utilizados para melhorar a retenção das restaurações em dentes tratados endodonticamente. Objetivo Avaliar a resistência de união de pinos de fibra de vidro submetidos a diferentes tratamentos superficiais e cimentados à dentina radicular com cimento resinoso autoadesivo. Material e método trinta ra
Rev. odontol. UNESP. Publicado em: 26/09/2019
-
8. Preparation and Luminescence Properties of Europium(III) Ternary Complex-modified Poplar Wood-based Materials
Inspired by the ultraviolet induced properties of biological materials, we developed fluorescent wood as a new type of functional material which can be applied to anti-counterfeit label technology and wood-emitting artwork. This study discusses the influence of temperature, time, ligand ratio, and reactant concentration on the structure and properties of flu
Mat. Res.. Publicado em: 23/09/2019
-
9. Construction and Evaluation of a Graphene Oxide Functionalized Aminopropyltriethoxy Silane Surface Molecularly Imprinted Polymer Potentiometric Sensor for Dipyridamole Detection in Urine and Pharmaceutical Samples
A dipyridamole (DIP) based surface molecularly imprinted polymer (MIP) was synthesized and applied as a sensing agent in a sensing layer of a new modified potentiometric carbon paste electrode (CPE). The potentiometric modified CPEs (GO@SiO2-NH2-MIP/MWCNTs/CPE, where GO is graphene oxide and MWCNTs is multi-walled carbon nanotubes) showed an improved perform
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
10. Avaliação da resistência à corrosão do filme de silanoviniltrimetoxisilano modificado com íons Ce (III) e Ce (IV) como pré-tratamento do aço carbono
RESUMO Silanos são compostos organo funcionais utilizados como agentes de acoplamentos entre interfaces orgânicoinorgânicas, com boas propriedades de adesão. Por esta razão, o uso de silanos como pré-tratamento para aços, vem ganhando espaço já que também são geradores de resíduos de menor toxidade ao meio ambiente e à saúde humana. Para melhor
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Avaliação da resistência de união de uma cerâmica de óxido de zircônia submetida a tratamentos de superfície por abrasão
Resumo Introdução A cimentação adesiva, com cerâmicas puras, é um passo relevante no estabelecimento da longevidade de trabalhos protéticos, sendo estes os melhores materiais utilizados para a reposição de dentes perdidos, de forma a reabilitar o sorriso. O sistema cerâmico de zircônia não se beneficia do tratamento com ácidos e necessita de di
Rev. odontol. UNESP. Publicado em: 12/09/2019
-
12. Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics
Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acr
Braz. oral res.. Publicado em: 16/05/2019