Shunt Circuits
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. ANALISE E PROJETO DO CONVERSOR BUCK INTERCALADO PARA ALIMENTAÇÃO DE LÂMPADAS DE DESCARGA EM ALTA PRESSÃO DE ALTA POTÊNCIA / INTERLEAVED BUCK CONVERTER ANALYSIS FOR HIGH POWER HIGH INTENSITY DISCHARGE LAMPS SUPPLYING
This work presents a detailed analysis about the interleaved buck converter applied to electronic ballasts to supply high power HID lamps, assuming the input voltage as a PFC stage output. As the output capacitor has a maximum value to be applied in parallel with the lamp, parallel operated converters are a suitable choice because the output current ripple c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
2. Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties
Active-Passive Piezoelectric Networks (APPN) integrate active voltage sources with passive resistance-inductance shunt circuits to a piezoelectric patch. This technique allows to simultaneously passively dissipate vibratory energy through the shunt circuit and actively control the structural vibrations. This work presents an analysis of active-passive dampin
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-09
-
3. Structural vibration control using piezoceramics in extension and shear connected to hybrid active-passive circuits / Controle de vibrações estruturais usando cerâmica piezoelétricas em extensão e cisalhamento conectadas a circuitos híbridos ativo-passivos
Esta dissertação apresenta uma análise numérica do controle de vibrações estruturais através de cerâmicas piezoelétricas em extensão e em cisalhamento conectadas a circuitos ativo-passivos compostos por resistência, indutância e fonte de tensão. Para tal, um modelo de elementos finitos de vigas sanduíche com três camadas elásticas e/ou piezoe
Publicado em: 2008
-
4. Modeling and optimization of piezoelectric shunts apply to passive vibration control / Modelagem numérica e otimização de shunts piezelétricos aplicados ao controle passivo de vibrações
Due to the development of new technologies, industrial structures are now made of lighter materials and work at higher operation speeds producing an increasing vibration and noise level generation. As a result, different techniques of active and passive control have been developed and are continuously being improved. Among the passive control techniques, the
Publicado em: 2007
-
5. Sensitivity analysis of secondary arc current for different transmission lines / Analise de sensibilidade da corrente de arco secundario para diferentes linhas de transmissão
The secondary arc appears in single-phase switching during clearing of non-permanent ground single-phase to ground faults. The problem happens especially on EHV lines, on aerial isolation, in faults with non permanent characteristics. In this work different transmission lines with voltage levels of 345 kV up to 765 kV and with 150 km up to 900 km length are
Publicado em: 2007
-
6. Multimodal vibration damping through piezoelectric patches and optimal resonant shunt circuits
Piezoelectric elements connected to shunt circuits and bonded to a mechanical structure form a dissipation device that can be designed to add damping to the mechanical system. Due to the piezoelectric effect, part of the vibration energy is transformed into electrical energy that can be conveniently dissipated. Therefore, by using appropriate electrical circ
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-09
-
7. Portal Blood Flow in Cirrhosis of the Liver*
Direct measurements of portal flow and pressure in a relatively large number of patients with cirrhosis show a marked reduction in flow associated with a nearly constant plateau of portal pressure. This lack of correlation indicates the complex relationships of resistances in the splanchnic, collateral, and hepatic circuits determining the division of the av