Shear Bond Strength
Mostrando 37-48 de 169 artigos, teses e dissertações.
-
37. Effect of bonding protocol on shear bond strength of orthodontic brackets: An in vitro study
The aim of this study was to evaluate the shear bond strength of bracket composites as a function of the application of flow adhesive prior to the composite and light curing time.Material and methods:Freshly extracted bovine permanent central incisors (50) were acid etched and divided into four groups varying the attachment protocol: (1) no adhesive, composi
Matéria (Rio J.). Publicado em: 2014-09
-
38. Evaluation of shear bond strength of two resin-based composites and glass ionomer cement to pure tricalcium silicate-based cement (Biodentine®)
Objectives: Tricalcium silicate is the major constituent phase in mineral trioxide aggregate (MTA). It is thus postulated that pure tricalcium silicate can replace the Portland cement component of MTA. The aim of this study was to evaluate bond strength of methacrylate-based (MB) composites, silorane-based (SB) composites, and glass ionomer cement (GIC) to
J. Appl. Oral Sci.. Publicado em: 2014-07
-
39. Micro-shear bond strength and surface micromorphology of a feldspathic ceramic treated with different cleaning methods after hydrofluoric acid etching
Objective: The aim of this study was to evaluate the effect of feldspathic ceramic surface cleaning on micro-shear bond strength and ceramic surface morphology. Material and Methods: Forty discs of feldspathic ceramic were prepared and etched with 10% hydrofluoric acid for 2 minutes. The discs were randomly distributed into five groups (n=8): C: no tre
J. Appl. Oral Sci.. Publicado em: 2014-04
-
40. Shear bond strength of a "solvent-free" adhesive versus contemporary adhesive systems
AIM: To compare the shear bond strength (SBS) of a solvent free self-etch adhesive with solvent containing adhesives. METHODS: Forty-five human teeth were sectioned longitudinally to expose superficial dentin and substrates polished with 600-grit SiC paper. The adhesive area was isolated with a cylindrical Teflon mold 3x4 mm. Fifteen specimens were pre
Braz. J. Oral Sci.. Publicado em: 2014-03
-
41. Effect of Two Microshear Test Devices on Bond Strength and Fracture Pattern in Primary Teeth
Este estudo in vitro avaliou a influência de dois dispositivos para aplicação de força de cisalhamento em testes de resistência de união ao microcisalhamento e no padrão de fratura em dentina e esmalte de dentes decíduos. Oitenta molares decíduos foram selecionados e superficies planas em esmalte (40 dentes seccionados no sentido mésio-distal) e de
Braz. Dent. J.. Publicado em: 2013-12
-
42. Adhesive bonding of resin composite to various titanium surfaces using different metal conditioners and a surface modification system
Objective: This study evaluated the effect of three metal conditioners on the shear bond strength (SBS) of a prosthetic composite material to cpTi grade I having three surface treatments. Material and Methods: One hundred sixty eight rivet-shaped specimens (8.0x2.0 mm) were cast and subjected to polishing (P) or sandblasting with either 50 mm (50SB) or
J. Appl. Oral Sci.. Publicado em: 2013-12
-
43. Effect of Activation Mode on Shear Bond Strength of Metallic Brackets
O objetivo deste estudo foi avaliar a resistência de união ao cisalhamento (RUC) de braquetes ortodônticos metálicos colados ao dente bovino utilizando resinas compostas ativadas por luz ou quimicamente ativadas. Cento e vinte incisivos mandibulares bovinos foram divididos em 6 grupos (n=20), de acordo com o material de colagem: Transbond XT (T); Enforce
Braz. Dent. J.. Publicado em: 2013-10
-
44. Consequences of enamel preparation with sodium hypochlorite, polyacrylic and phosphoric acids for the bonding of brackets with resin-modified glass ionomer cements
The aim of this study was to evaluate the effects of deproteinization with 5.25% sodium hypochlorite (NaOCl) prior to enamel conditioning with 10% polyacrylic acid (PAA) and 35% phosphoric acid (PA) on the bond strength (BS) of brackets bonded with resin-modified glass ionomer cement (RMGIC). One hundred human premolars extracted for orthodontic reasons were
Mat. Res.. Publicado em: 17/09/2013
-
45. Comparison of shear bond strength of orthodontics brackets on composite resin restorations with different surface treatments
INTRODUÇÃO: frequentemente, os pacientes ortodônticos apresentam restaurações de resina composta; no entanto, existem poucos estudos que avaliam a melhor forma de colagem ortodôntica nessa situação. OBJETIVO: o objetivo do presente trabalho foi avaliar a força adesiva de braquetes ortodônticos em restaurações resinosas com tratamento de superfíc
Dental Press J. Orthod.. Publicado em: 2013-08
-
46. Effects of surface treatment of provisional crowns on the shear bond strength of brackets
OBJETIVO: avaliar a resistência adesiva de braquetes metálicos colados a coroas provisórias confeccionadas em resina acrílica após diferentes tratamentos de superfície. MÉTODOS: cento e oitenta corpos de prova foram confeccionados em Duralay e divididos aleatoriamente em seis grupos (n = 30), de acordo com tratamento de superfície e material de colag
Dental Press J. Orthod.. Publicado em: 2013-08
-
47. Factors affecting the bond strength of denture base and reline acrylic resins to base metal materials
OBJECTIVE: The shear bond strengths of two hard chairside reline resin materials and an auto-polymerizing denture base resin material to cast Ti and a Co-Cr alloy treated using four conditioning methods were investigated. MATERIAL AND METHODS: Disk specimens (diameter 10 mm and thickness 2.5 mm) were cast from pure Ti and Co-Cr alloy. The specimens were
J. Appl. Oral Sci.. Publicado em: 2013-07
-
48. Heat treatment following surface silanization in rebonded tribochemical silica-coated ceramic brackets: shear bond strength analysis
OBJECTIVE: This study aimed to evaluate the effects of heat treatment on the tribochemical silica coating and silane surface conditioning and the bond strength of rebonded alumina monocrystalline brackets. MATERIAL AND METHODS: Sixty alumina monocrystalline brackets were randomly divided according to adhesive base surface treatments (n=20): Gc, no treatm
J. Appl. Oral Sci.. Publicado em: 2013-07