Separation
Mostrando 1-12 de 5398 artigos, teses e dissertações.
-
1. Design, development, and implementation of 3D-printed polylactic acid centrifuge rotors for laboratory-scale applications
In this work, self-made laboratory centrifuge equipment was developed for the separation of suspensions and immiscible liquids. This centrifuge was based on the Arduino microcontroller and fabricated from simple and recycled mechanical and electronic parts, spending an inexpensive budget suitably. The centrifuge frame and rotors were manufactured of Polylact
Química Nova. Publicado em: 2022
-
2. Editorial Comment: Anterior component separation technique for abdominal closure in bladder exstrophy repair: Primary results
International braz j urol. Publicado em: 2022
-
3. Per-Aqueous Liquid Chromatography for the Separation of Polar Compounds Preparation and Characterization of Poly(ethylene oxide co dimethylsiloxane) Based Stationary Phase
Poly(ethylene oxide-co-dimethylsiloxane) was thermally immobilized on silica particles-Si(PEO)-to separate small polar compounds with water-rich mobile phases. Poly(ethylene oxide-co-dimethylsiloxane) content on Si(PEO) stationary phase was optimized using a central composite design. Infrared spectroscopy, scanning electron microscopy, and thermogravimetric
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Optical sorting technology for waste management from the Boukhadra iron ore mine (NE Algeria)
Abstract Mining processes in the iron ore mine of Boukhadra, Tebessa (NE Algeria) generated thousands of tons of mining wastes every year, which represents a real threat to the environment, leading to hazardous effects for the resident population of the region. The aim of this study is the selective sorting of the Boukhadra mining wastes for valorization. Th
REM - International Engineering Journal. Publicado em: 2022
-
5. The BigFLUX Magnetic Matrix Technology
Abstract The Magnetic separation of ultra-fine ore particles has always posed a challenge to the JONES/WHIMS process. Despite many advances in this technology, no effective improvement has been made to its core component: The Magnetic Matrix. The current approach to separate ultra-fine particles teaches that the gap of the matrix and its teeth size must be s
REM - International Engineering Journal. Publicado em: 2022
-
6. What is new in non-chromatographic flavonoid purification?
Flavonoids are metabolites occurring in all plant tissues and present different biological activities. They occur in a mixture of similar polarity with laborious separation and purification processes, usually furnishing low yields. Semi-preparative chromatographic methods are universally employed procedures for their isolation. This paper discusses the state
Química Nova. Publicado em: 2022
-
7. TEST OF THE SCREENING AND PARAMETER OPTIMIZATION OF SWING SEPARATION SIEVE IN FIELD OPERATION
ABSTRACT The need for clarity regarding the sieving characteristics of the potato-soil mixture, as provided by the swing separating sieve of a potato digger, as well as the derived problems of low potato transportation efficiency, a high potato damage rate and low potato unearthing rate, are the main reasons for this study. Dynamic tracking technology is pro
Engenharia Agrícola. Publicado em: 2022
-
8. Does Anzer Propolis Have a Protective Effect on Rabbit Spinal Cord Ischemia/Reperfusion Injury?*
Abstract Introduction: In this study, Anzer propolis, which can only be obtained from the Eastern Black Sea region in Turkey, is studied for its effect on spinal cord ischemia/reperfusion injury. Methods: A total of 12 healthy male New Zealand White rabbits with an average weight of 3.0 to 3.5 kg were separated into two blind and randomized groups: the isc
Brazilian Journal of Cardiovascular Surgery. Publicado em: 2022
-
9. Experimental Loss Segregation in a Solid Rotor Induction Motor
Abstract Solid rotor induction motors (SRIMs) are asynchronous motors suited for high speed applications. This work presents an experimental case study where standard loss segregation procedures for induction motors are performed with a two-phase smooth solid rotor induction motor in order to verify their applicability. Even though the machine is supposed to
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
10. DESVENDANDO UM CASO: QUANDO ESTUDANTES SE TORNAM PERSONAGENS DE UMA HISTÓRIA NA DISCIPLINA DE QUÍMICA ORGÂNICA EXPERIMENTAL
Being part of the Pharmacy course curriculum, Organic Chemistry emphasizes the fundamentals of Organic Synthesis, reaction mechanisms, as well as the methods for separation, purification and identification of organic compounds. However, students do not always realize the direct association between this knowledge and their future working field. In an effort t
Química Nova. Publicado em: 2022
-
11. Preparation of Silicon Oxycarbide (SiCO) Ceramics from Different Polymer Architectures and Assessment on the Performance as Electrodic Materials for Voltammetric Sensing of Antioxidant Phenolic Compounds
Silicon oxycarbide (SiCO) ceramics obtained from polymer pyrolysis and with varied carbon contents were prepared and evaluated as new electrodic materials for sensing of tert butylhydroquinone (TBHQ) and butylated hydroxyanisole (BHA) antioxidants. Three polymers were synthesized varying molecular architecture and aromatic carbon groups, followed by pyrolysi
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
12. Prospects for Developing Low-Cost Optical Fiber Sensors for Liquid-Liquid Interface Detection
Abstract This work examines the prospects of a low-cost retroreflection optical sensor system for detection of the interface between two immiscible liquids, for applications in oil separation tanks. The sensor in its simplest configuration comprises a bare fiber optic tip, cleaved at an angle of 90º relative to the longitudinal fiber axis. The device tested
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022