Sem Edx
Mostrando 1-12 de 159 artigos, teses e dissertações.
-
1. Enhancing glass ionomer cement features by using the calcium phosphate nanocomposite
Resumo Este estudo apresenta a síntese de cimentos de ionômero de vidro (GIC) modificados com nanopartículas de fosfato de cálcio (nCaP). Os nCaP / GIC foram submetidos a ensaios mecânicos de compressão e tração diametral. Os biocompósitos foram caracterizados por microscopia eletrônica de varredura (MEV), espectroscopia de energia dispersiva de ra
Brazilian Dental Journal. Publicado em: 2022
-
2. Thermal, structural and optical properties of magnetic BiFeO3 micron-particles synthesized by coprecipitation method: heterogeneous photocatalysis study under white LED irradiation
Abstract Bismuth ferrite, BiFeO3 (BFO) prepared via a coprecipitation method, was used as an effective photocatalyst for the degradation of methylene blue (MB) using a white light-emitting diode (LED-50 W) lamp. The as-prepared material was characterized by TGA, XRD, SEM-EDX, FTIR, and UV-vis-DRS techniques. The effects of experimental key parameters such as
Cerâmica. Publicado em: 2022
-
3. Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste
Abstract Contemporary organizations are showing a growing interest in the reuse of solid waste from industrial processes with the intention of reducing environmental impacts and reducing costs. The mining activity is one of the main waste generators in Brazil. In parallel, geopolymeric materials have been gaining prominence in studies that make it a possible
REM, Int. Eng. J.. Publicado em: 2021-09
-
4. Microbial activity and studies on excavated megalithic micaceous potsherds from Peninsular India
Abstract The abundantly available mica flakes were added in raw materials to manufacture pottery in Central Peninsular India during the early Iron Age (700-300 BCE) for storage and glittering. The micaceous potsherds from the excavated megalithic site of Nagpur were studied for their composition, manufacturing techniques, microstructural features, microbial
Cerâmica. Publicado em: 2021-06
-
5. Preparation of Fluorescent Carbon-Based Dots from Waste Tire Pyrolysis
The pyrolysis of waste tire has been proposed as an alternative route to its recycling producing residual oils that can be used as fuels. In this work, a physicochemical process to obtain carbon-based dots (CBD) from carbon black (CBL) derivatives of tires is described. For this, the CBL was treated with different acids to produce CBL1 and CBL2 particles sus
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
6. Evaluation of a Graphite-Polyurethane Composite Electrode Modified with Copper Nanoparticles as an Amperometric Flow Detector in a Wall-Jet System for the Determination of Cysteine
A graphite-polyurethane composite electrode (GPUE) was modified by electrodeposition of copper nanoparticles (CuNP) followed by electrochemical treatment in NaOH (GPUE-CuNP), in order to prepare an amperometric sensor for the determination of cysteine (Cys). Cyclic votammograms of Cys solutions at GPUE-CuNP allowed the description of a sequence of electroche
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
7. Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution
Utilizing high chromium and nickel content in AISI 304 steel confers its good corrosion resistance. However, the high content of chromium and nickel increases the steel susceptibility to corrosion caused by the high concentration of chlorine. Consequently, the electrochemical and mechanical performance of the steel degrades. In this study, the effect of addi
Mat. Res.. Publicado em: 02/12/2019
-
8. Reparative Dentin Formation Using Stem Cell Therapy versus Calcium Hydroxide in Direct Pulp Capping: An Animal Study
Resumo O processo de capeamento pulpar direto é um método terapêutico que visa a manutenção da vitalidade e saúde da polpa, usando um material biocompatível colocado diretamente sobre a polpa exposta. O objetivo deste estudo foi avaliar e comparar o efeito do capeamento pulpar direto usando células-tronco da polpa dentária (CTPDs) ou hidróxido de c
Braz. Dent. J.. Publicado em: 28/11/2019
-
9. Influence of the mode of application of universal adhesive systems on adhesive properties to fluorotic enamel
Abstract The objective of this study is to compare the resin-enamel bond strength (mμSBS), in-situ degree of conversion (DC), and the enamel-etching pattern (SEM/EDX) of universal adhesive systems when applied to sound and fluorotic enamel. Ninety-eight human molars were sectioned into 4 parts and divided into 24 groups according to 1) enamel surface (sound
Braz. oral res.. Publicado em: 25/11/2019
-
10. Biologically Synthesized Silver Nanoparticles for Enhancing Tetracycline Activity Against Staphylococcus aureus and Klebsiella pneumoniae
Abstract Phytochemical content of plant extracts can be used effectively to reduce the metal ions to nanoparticles in one-step green synthesis process. In this study, six plant extracts were used for the synthesis of silver nanoparticles (AgNPs). Biologically synthesized AgNPs was characterized using UV-Vis Spectrophotometer, Field Emission Scanning Electro
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
11. Facile One-Step Electrodeposition Fabrication of Amorphous MoS2 Catalysts in Titanium for Hydrogen Evolution Reaction
Hydrogen is seen as a future energy carrier that will assist the global energy fuel demand. However, it is still necessary to study efficient and inexpensive catalysts that can be used on a large scale to make this technology practical. In this paper the electrodeposition of molybdenum disulfide (MoS2) film on titanium (Ti) substrate was performed by cyclic
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
12. Silver nanoparticles incorporated PVC films: evaluation of structural, thermal, dielectric and catalytic properties
Abstract In this work, silver nanoparticle – polyvinylchloride (SNC-PVC) composites were synthesized by loading 2.5% to 10.0% silver ions to PVC using simple solution casting technique. Material properties including dielectric, thermal stability were discussed in some detail. Incorporation of silver nanoparticles (SNPs) in the PVC matrix was confirmed by U
Polímeros. Publicado em: 03/10/2019