Seismic Processing
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Monitoring of Sobradinho landslide (Brasília, Brazil) and a prototype vertical slope by time-lapse interferometry
Abstract The application of geophysical monitoring technologies may offer an opportunity to understand the dynamic of slopes in response to factors triggering their instability. In this study, Ambient Noise Interferometry was used as a monitoring approach on a man-made reduced-scale vertical slope and on a natural-scale landslide in Sobradinho (Brazil), unde
Braz. J. Geol.. Publicado em: 03/06/2019
-
2. Interpretation software applied to the evaluation of shallow seismic data processing routines in fluvial deposits
Abstract High-resolution seismic surveys have been successfully applied in the study of active sedimentary environments in shallow submerged settings, particularly improving the interpretation of sedimentary facies and architectural elements that characterize fluvial rock records. Nevertheless, specific data processing workflows to emphasize sedimentary stru
Braz. J. Geol.. Publicado em: 29/04/2019
-
3. Salt structures from inversion of residual gravity anomalies: application in Santos Basin, Brazil
Abstract The Santos Basin, with an area of about 350.000 km 2 , is the largest salt basin of the South Atlantic, and due to its high economic hydrocarbon potential, it is a recurrent theme in scientific studies. The salt structures over the region present great importance for hydrocarbon accumulation and the geological/geophysical studies are performed from
Braz. J. Geol.. Publicado em: 15/04/2019
-
4. Processing of large offset data: experimental seismic line from Tenerife Field, Colombia
ABSTRACT: Exploration seismology provides the main source of information about the Earth’s subsurface, which in many cases can be presented as a simple model of horizontal or near-horizontal layers. After the seismic acquisition step, conventional seismic processing of reflection data provides an image of the subsurface by using information about the refle
Braz. J. Geol.. Publicado em: 08/03/2018
-
5. Study of Pipeline Steels with Acicular Ferrite Microstructure and Ferrite-bainite Dual-phase Microstructure
Three kinds of X70 steels with the same chemical composition and different microstructures fabricated by varying processes were compared in aspect of the microstructures and mechanical properties using SEM, TEM and tensile testing machine. The experimental results showed that the steel 1 with acicular ferritic microstructure fabricated by thermal-mechanical
Mat. Res.. Publicado em: 2015-02
-
6. Avaliação do método de deconvolução sobre dados de sísmica rasa / Evaluation of the deconvolution method on shallow seismic data.
Neste trabalho de pesquisa foi realizado um estudo do método de deconvolução visando melhor adequação à situação encontrada na escala de investigação rasa para a estimativa da forma de onda e da resposta impulsiva da Terra. Procedimentos determinísticos e estatísticos (métodos cegos) foram avaliados sobre dados sintéticos e dados reais adquirid
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/04/2012
-
7. Seismic data inversion by cross-hole tomography using geometrically uniform spatial coverage
One of the inversion schemes most employed in seismic tomography processing is least squares and derived algorithms, using as input data the vector of first arrivals. A division of the whole space between sources and receivers is performed, constructing a pixel model with its elements of the same size. Spatial coverage is defined, then, as the sum of travele
Revista Brasileira de Geofísica. Publicado em: 2010-03
-
8. Atenuação de ruídos coerentes utilizando decomposição em modos empíricos
O processamento sísmico tem como principal objetivo fornecer imagem adequada das estruturas geológicas da sub-superfície de bacias sedimentares. Dentre as etapas fundamentais deste processamento está o enriquecimento das reflexões sísmicas através de filtragem de sinais indesejáveis, chamados de ruídos, a amplificação de sinais de interesse e a ap
Publicado em: 2010
-
9. Tempo de transito em meios com isotropia transversal vertical (VTI) : aproximações e inversão dos parametros / Traveltime in vertical transversely isotropic (VTI) media : approximations and parameters inversion
As exploration targets have become deeper, cable lengths have increased accordingly, making the conventional two term hyperbolic traveltime approximation produce increasingly erroneous traveltimes. In other words, for modern long-offset acquisition geometries, a hyperbolic traveltime approximation is no longer sufficient to flatten the CMP gather because of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/08/2009
-
10. REGISTRO DE SÍSMICA 3D A DADOS DE POÇOS / REGISTRATION OF 3D SEISMIC TO WELL DATA
Data acquired directly from borehole are more reliable than seismic data, and then, the first can be used to adjust the second. This work proposes the correction of a volume of seismic amplitudes through a three step algorithm. The first step is the identification of common features in both sets using a pattern recognition algorithm. The second step consists
Publicado em: 2009
-
11. Supressão do ruído de rolamento superficial utilizando a transformada Curvelet
Among the many types of noise observed in seismic land acquisition there is one produced by surface waves called Ground Roll that is a particular type of Rayleigh wave which characteristics are high amplitude, low frequency and low velocity (generating a cone with high dip). Ground roll contaminates the relevant signals and can mask the relevant information,
Publicado em: 2009
-
12. Seimic resolution and time-to-depth conversion by the common-reflection-surface (CRS) method / Resolução sismica e conversão tempo-profundidade, atraves do metodo de superficie comum de reflexão (CRS)
The demand for large multiplicities in seismic processing has always been a tough target for the professionals involved in this area. Until recently, the major effort to meet this demand has been done during seismic acquisition, which, due to high cost, is not usually implemented. Recently, the Common Reflection Surface (CRS) technique filled this gap provid
Publicado em: 2008