Scanning
Mostrando 1-12 de 6372 artigos, teses e dissertações.
-
1. Study of rhombohedral tricalcium phosphate in hexagonal crystal structure family on the sample prepared by the sol-gel route and the effect of calcination temperature
Abstract The effect of the calcination temperature at 800 and 1000 °C on the stable formation of the tricalcium phosphate with rhombohedral structure in the system of the hexagonal crystal family was determined, while its precursor was made from limestone obtained from nature in the Lumajang district, Indonesia. The rhombohedral tricalcium phosphate samples
Cerâmica. Publicado em: 2023
-
2. Synthesis of delafossite CuCrO2 via solution combustion method and its acid functionalization for biodiesel production
Abstract CuCrO2 was synthesized by solution combustion synthesis (SCS) and applied as a heterogeneous catalyst to produce soybean biodiesel. The combustion reaction was carried out using urea as a fuel, and copper (II) and chromium (III) nitrates as precursors. After the powders’ obtention, these were calcined and functionalized in an acidic medium. The po
Cerâmica. Publicado em: 2023
-
3. The influence of compositional variability of dimension stone residues on the properties of rustic porous ceramic tiles
Abstract This study analyzed how the compositional variability of dimension stone residues influences the characteristics of rustic porous ceramic tiles. The specimens were prepared by adding 20 wt% of dimension stone residue to the clay and sintered at 1000 °C for 1 h. The testing assays performed were physical properties and structural analysis through sc
Cerâmica. Publicado em: 2023
-
4. Scanning electron microscopy of panitumumab-induced eyelash and hair alterations - Pili canaliculi
Abstract Panitumumab is a monoclonal antibody against the epidermal growth factor receptor used in metastatic colorectal cancer; in addition to tumor cells, it acts on epidermal keratinocytes and on the outer root sheath and presents skin toxicity in up to 90% of cases. A scanning electron microscope was used to examine the eyelashes and hairs of a 65-year-o
Anais Brasileiros de Dermatologia. Publicado em: 2022
-
5. Transmission electron microscopy of pili annulati
Abstract Background: Little is known about the ultrastructure of pili annulati. Objectives: To examine with transmission electron microscopy affected hairs of a family, whose diagnosis had been confirmed in five individuals with scanning electron microscopy, which showed surface undulations with ‘‘curtain-like’’ folding of the hair cuticula and to
Anais Brasileiros de Dermatologia. Publicado em: 2022
-
6. Characterization of micaceous minerals occurring in phosphate ores in Brazil: emphasis on the interstratified phyllosilicates
Abstract Micaceous minerals were characterized in three phosphatic ores from mines in Western Minas Gerais State, Brazil, all having complex chemical and mineralogical compositions, with emphasis on interstratified phyllosilicates. Knowledge of the relationship between the physical and chemical characteristics of the phyllosilicates contributed to a better u
REM - International Engineering Journal. Publicado em: 2022
-
7. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
8. Frequency of Congenital Aortic Arch Anomaly in COVID-19 Patients
SUMMARY OBJECTIVE: The aim of this study was to investigate the frequency of aortic arch anomaly in COVID-19 patients and to determine whether it will be included in the risk classification. METHODS: The study was retrospectively conducted in a third-level hospital by scanning the contrast-enhanced thoracic computed tomography and thoracic computed tomogra
Revista da Associação Médica Brasileira. Publicado em: 2022
-
9. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
10. Effect of sintering temperature on mechanical and bioactivity properties of bioactive glass and cordierite composite
Abstract In this study, a composite of bioactive glass (BG) and cordierite (BG-cord) was proposed to increase the strength and bioactivity of BG. Both BG and cordierite were separately synthesized with the method of glass melting, then, they were used to fabricate BG-cord with a variation of sintering temperature (600 to 1000 °C). The highest diametral tens
Cerâmica. Publicado em: 2022
-
11. Phase transformation of kaolinite to hexagonal kalsilite using K2CO3
Abstract Hydrothermal synthesis of kalsilite was facilitated by the inclusion of potassium carbonate (K2CO3) as the source of the potassium ion. After a 24 h reaction at 220 °C, kaolin clay treated with 1.25 M K2CO3 showed the most significant peaks at 2θ of 28.5° and 34.7° by X-ray diffraction corresponding to the hexagonal kalsilite. In addition, field
Cerâmica. Publicado em: 2022
-
12. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022