Scanning Electronic Microscopy
Mostrando 37-48 de 234 artigos, teses e dissertações.
-
37. The effect of TTNT nanotubes on hydrogen sorption using MgH2
Nanotubes are promising materials to be used with magnesium hydride, as catalysts, in order to enhance hydrogen sorption. A study was performed on the hydrogen absorption/desorption properties of MgH2 with the addition of TTNT (TiTanate NanoTubes). The MgH2-TTNT composite was prepared by ball milling and the influence of the TTNT amount (1.0 and 5.0 wt. (%))
Mat. Res.. Publicado em: 08/03/2013
-
38. Comparison of methods to evaluate implant-abutment interface
AIM: To compare two main methods of two-dimensional measurement of fit at the implant prosthodontic interface, testing the hypothesis that optical microscopy (OM) can reliably and efficiently scanning electronic microscopy (SEM). METHODS: Four frameworks with four titanium abutments joined with titanium bars were used. The implant-abutment interfaces were ex
Braz. J. Oral Sci.. Publicado em: 2013-03
-
39. EVALUATION OF THE ULTRASTRUCTURE OF THE SMALL INTESTINE OF HIV INFECTED CHILDREN BY TRANSMISSION AND SCANNING ELECTRONIC MICROSCOPY
ObjetivosDescrever achados ultra-estruturais do intestino delgado de crianças infectadas pelo HIV.MétodosEstudo descritivo, observacional de biopsias do intestino delgado, realizada entre agosto de 1994 e maio de 1995 em São Paulo - Brasil. Este material pertencia a 11 crianças infectadas pelo HIV e foi armazenado em um laboratório em blocos de parafina
Arq. Gastroenterol.. Publicado em: 2013-03
-
40. Marginal adaptation of class V composite restorations submitted to thermal and mechanical cycling
Objective This study evaluated the effect of the margin location and an adhesive system on the marginal adaptation of composite restorations. Material and Methods Class V cavities were prepared in bovine teeth with the gingival margin on the dentin and the incisal margin on the enamel. The cavities were restored with a micro-hybrid composite resin using an
J. Appl. Oral Sci.. Publicado em: 2013-02
-
41. Microtopografia de implantes de titânio com diferentes tratamentos de superfícies à microscopia eletrônica de varredura e de força atômica / Microtopography of titanium implants with different surface treatments scanning in electronic microscopy and atomic force microscopy
Introduction: Bone-implant interface quality may be influenced by surface roughness and determines how cells interact, cling to and fix to, therefore can enhance and shorten the time for osseointegration. This study aims to analyze qualitatively the topography and architecture of different dental implants surfaces, to compare and describe them. MATERIALS AND
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/08/2012
-
42. Produção e caracterização de implantes nanotexturizados de titânio associado a liberação gradual de fármacos
The aim of this study was to assess, in vivo, the effect of two different surface treatments of titanium implants - plasma-spray (PSA) and nano-textured plasma-spray (PSA-nano) - at the bone-to-implant interface (osseointegration), associated or not to the recombinant human growth hormone (rhGH). Twenty-four prototypes of pure titanium implants, 6-mm long an
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/08/2012
-
43. Fabricação e caracterização de dispositivos baseados em nanofitas de Óxido de Estanho (SnO2)
The structural and transport features of tin oxide nanobelts synthesized by the vapor-solid method combined with the carbothermal reduction process were investigated in this work. The samples synthesized were characterized by using experimental techniques such as scanning and transmission electron microscopy and x-ray diffraction. The nanobelts were found to
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/08/2012
-
44. Ferritas de cobre e zinco do tipo espinélio sintetizadas pelos métodos: hidrotermal assistido por micro-ondas, precursores poliméricos, reação no estado sólido e decomposição térmica / Spinel type copper and zinc ferrites synthesized by the methods: microwave assisted hydrothermal, polymeric precursor, solid state reaction and thermal decomposition.
Ferrites are well studied materials due to their wide application as: gas detector, optical, electronic and magnetic devices, catalyst and pigments. In the synthesis of materials, the properties are extremely influenced by the synthesis method. In this work, four methods were used in the synthesis of spinel ferrites with composition Zn1-xCuxFe2O4 (x = 0,0; 0
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/05/2012
-
45. ESTUDO DOS SISTEMAS CeO2(1-x) :Pr6O11(x); CeO2(1-x):Fe2O3(x) E CeO2(0,95-x): Pr6O11(0,05):Fe2O3(x) PARA APLICAÇÃO COMO PIGMENTOS INORGÂNICOS DE BAIXA TOXICIDADE
This study focused on the Cerium oxide (CeO2) based pigmenting systems, doped with Praseodymium oxide (Pr6O11) and hematite (Fe2O3 iron oxide) synthesized through the solid state reaction (OM oxide mixture) and the Pechini method. Simultaneously, CeO2-Pr6O11-Fe2O3 ternary system pigments were synthesized through OM, with the addition of mineralizers. The sam
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/03/2012
-
46. Influência do alinhamento de nanotubos de carbono nas propriedades elétricas de nanocompósitos de matriz epoxídica / Influence of the alignment of carbon nanotubes in the electrical properties of epoxy matrix nanocomposites
Epoxy resin / carbon nanotubes (CN) composites are widely used due to the versatile matrix phase and the excellent properties of the reinforcing phase. However, the development of polymer nanocomposites still faces three important challenges: interfacial interaction, dispersion and orientation of the reinforcing phase. This work studied the orientation proce
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/02/2012
-
47. LaCrO3 composite coatings for AISI 444 stainless steel solid oxide fuel cell interconnects
Doped lanthanum chromite-based ceramics are the most widely used interconnector material in solid fuel cells (SOFC) since they exhibit significant electrical and thermal conductivity, substantial corrosion resistance and adequate mechanical strength at ambient and high temperatures. The disadvantage of this material is its high cost and poor ductility. The a
Mat. Res.. Publicado em: 23/10/2012
-
48. Alkali pretreated of wheat straw and its enzymatic hydrolysis
The efficiency of enzymatic hydrolysis of cellulose can be improved by various pretreatments of the substrate. In order to increase the efficiency of enzymatic saccharification of the wheat straw, we determined the effect of different pretreatments on the physical structure, chemical components and enzymatic saccharification of wheat straw. Our results showe
Brazilian Journal of Microbiology. Publicado em: 2012-03