Sample Dissolution
Mostrando 1-12 de 44 artigos, teses e dissertações.
-
1. Effect of Multi-Pass Rolling on the Performance of AZ31 Magnesium Alloy Anode in Mg-Air Battery
In this work, the influence of rolling passes on microstructure, corrosion behavior, electrochemical performance, and battery performance of AZ31 magnesium alloy was studied. The experimental results show that the grain size decreases first and then increases with rolling passes. Among them, the grain size of three passes rolled sample is the smallest, while
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Influência da incorporação da HAp e β-TCP no cimento ósseo wollastonita/brushita
RESUMO O elevado número de pacientes com problemas de saúde por doenças ósseas ou traumas tem promovido o desenvolvimento de pesquisas em biomateriais de modo a garantir uma melhor qualidade de vida. Dentre os diversos biomateriais, os cimentos ósseos poliméricos (PMMA) ou cerâmicos (fosfatos e silicatos de cálcio) destacam-se para aplicações em ci
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Influence of the Solution-Treatment Temperature and Short Aging Times on The Electrochemical Corrosion Behaviour of Uns S32520 Super Duplex Stainless Steel
Sigma phase leads to deterioration of corrosion resistance of super duplex stainless steels (SDSS) and its volume fraction increases as the time which the materials is exposed in determined temperature increases. In the present study, the effect of the short aging time on the formation of the sigma phase and on the corrosion behavior of UNS S32520 SDSS at 3.
Mat. Res.. Publicado em: 15/08/2019
-
4. MAGNETOMETRIA IN-SITU PARA CARACTERIZAÇÃO DE MATERIAIS ELETRODEPOSITADOS
We have recently made studies of electrodeposits of Co onto graphene attached to different substrates, successfully performed via in-situ magnetization measurements. The magnetic analysis of deposits as a function of time lapse, indicate that Co grows with different magnetic characteristics from the beginning to the end of each run, independent of the substr
Quím. Nova. Publicado em: 18/07/2019
-
5. Brushite cement containing gelatin: evaluation of mechanical strength and in vitro degradation
Resumo Os cimentos de fosfato de cálcio (CPCs) são materiais potenciais para reparar defeitos ósseos, principalmente devido à sua excelente biocompatibilidade e osteocondutividade. No entanto, suas baixas propriedades mecânicas limitam suas aplicações clínicas. A adição de gelatina pode melhorar as propriedades mecânicas e biológicas dos CPCs, ma
Cerâmica. Publicado em: 06/06/2019
-
6. Manufacturing of Cu-Sn foams through SDP
ABSTRACT This work reports the processing of bronze foams manufactured by using the powder metallurgy method known as Sintering Dissolution Process. During the sintering step, a device with controlled atmosphere separated from the heating furnace was employed to avoid the quick oxidation of metal particles. The device allows to control its internal atmospher
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey
ABSTRACT At the moment the industrially applied techniques for cemented carbide reclamation feature several deficiencies. Depending on the process route, obstacles consist in high energy and chemical consumption (indirect recycling methods) or a deterioration of the recycled product in comparison with the primary material (direct recycling approach). Therefo
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Impact of an Alkaline Solution on the Chemistry, Mineralogy, and Sorption Properties of a Typic Rhodudult Soil
Abstract The preferred option for disposal of short-lived low and intermediate level radioactive wastes is a near surface disposal facility in which soil is one of the barriers that avoid radionuclide migration outside the controlled area. For construction of that kind of facility, concrete is widely used, and its interaction with water induces its degradati
Rev. Bras. Ciênc. Solo. Publicado em: 09/11/2017
-
9. A Straightforward Method for Determination of Al and Na in Aluminosilicates Using ICP OES
The improvements on aluminosilicates dissolution through microwave-assisted acid decomposition procedures for Na and Al quantification by inductively coupled plasma optical emission spectrometry (ICP OES) are reported here. Complete dissolution of the samples is achieved employing 4 mL of HNO3 and 3-4 mL of HF thus reducing the total amount of these reactant
J. Braz. Chem. Soc.. Publicado em: 2017-08
-
10. DETERMINAÇÃO DE ENXOFRE EM SHAMPOO POR ESPECTROFOTOMETRIA UV-VIS: AVALIAÇÃO DE MÉTODOS DE PREPARO DE AMOSTRAS
Dry ashing, dissolution in aqueous medium or wet digestion methods were evaluated for sample preparation of shampoo for the subsequent indirect determination of sulfur by UV-Vis spectrophotometry. Among the sample preparation methods evaluated, microwave-assisted wet digestion using 7 mol L-1 HNO3 was the most suitable method for this purpose. Accuracy of th
Quím. Nova. Publicado em: 2017-08
-
11. Pedogenic Iron Oxides in Iron-Rich Oxisols Developed from Mafic Rocks
ABSTRACT Despite the considerable amount of information on the mineralogical characteristics of pedogenic Fe oxides in Brazilian soils, there are few studies on Fe-rich soils developed from mafic rocks with taxonomic identities at lower categorical levels. This study evaluated the mineralogical characteristics of pedogenic Fe oxides in B horizons (Bw) of Fe-
Rev. Bras. Ciênc. Solo. Publicado em: 27/04/2017
-
12. Pores distribution statistical analysis for metal foams obtained by casting-dissolution process
ABSTRACT Interesting properties of metal foams such as light weight, good energy absorption and low thermal conductivity, have promoted the development of new processes to improve properties without sacrificing productivity. This study aims to verify the uniformity pore distribution in an aluminum alloy foam obtained by Casting - Dissolution Process, using a
Matéria (Rio J.). Publicado em: 2016-06