Sage
Mostrando 13-24 de 226 artigos, teses e dissertações.
-
13. Gender and Same-Sex Intimate Partner Violence: A Systematic Literature Review
Resumo A importância do gênero na violência na intimidade (VI) tem sido estudada, maioritariamente, nas relações entre pessoas de sexos diferentes. Este artigo é o resultado de uma revisão sistemática da literatura em que se procurou perceber a importância do gênero para a VI entre pessoas do mesmo sexo. Não só na violência em si, mas também e
Trends Psychol.. Publicado em: 2019-01
-
14. Analysis of Secondary Refining Slag Parameters with Focus on Inclusion Cleanliness
Secondary refining slag samples with different chemical compositions (45-54 % CaO, 7-13 % Al2O3, 20-29 % SiO2, 9-16 % MgO, 0-5 % CaF2) were investigated to verify the influence of their effective viscosity on inclusion cleanliness of DIN 38MnS6 in a steelmaking plant. The steel samples were collected during the production process for analysis of inclusions.
Mat. Res.. Publicado em: 02/08/2018
-
15. Use of ornamental rock residues for mould flux development
Abstract Ornamental rock production, such as marble and granite plates, have great importance in the southeastern region of Brazil. Its residues are composed of some compounds used in continuous casting as mould fluxes. Therefore, the aim of this article was to study these residues to formulate mould fluxes. First, the raw materials were chemically character
REM, Int. Eng. J.. Publicado em: 2018-07
-
16. AÇÕES DOS ENFERMEIROS NO EXERCÍCIO DA ADVOCACIA DO PACIENTE: REVISÃO INTEGRATIVA
RESUMO: Objetivo: identificar as ações dos enfermeiros no exercício da advocacia do paciente, na literatura científica internacional publicada nos últimos dez anos. Método: revisão integrativa da literatura, cujos dados foram coletados na base de dados Cumulative Index to Nursing and Allied Health Literature e SAGE Journals Online, utilizando-se os
Texto contexto - enferm.. Publicado em: 28/05/2018
-
17. Assessment of viscosity calculation for calcium-silicate based slags using computational thermodynamics
Abstract This study focuses on the viscosity calculation of molten slags using computational thermodynamics. Different slag systems and their measured viscosities from different references were used and compared with those obtained through FactSage software. To calculate the viscosity of each slag the Viscosity module available in FactSage 6.4 was used. In o
REM, Int. Eng. J.. Publicado em: 2018-04
-
18. Evaluating the hot metal dephosphorization efficiency of different synthetic slags using phosphorus partition ratio, phosphate capacity and computational thermodynamics
Abstract Phosphate capability (CP) and phosphorus partition ratio (LP) are usually used to evaluate the thermodynamic efficiency of dephosphorization slags with different compositions in hot metal pretreatment. However, these parameters are only useful in equilibrium conditions, and they are not accurate when they are used to evaluate slag efficiency in indu
REM, Int. Eng. J.. Publicado em: 2018-04
-
19. MgO Saturation Analisys of CaO-SiO2-FeO-MgO-Al2O3 Slag System
Electric arc furnace (EAF) slag has a range of functions, including improving energy efficiency through the "slag foaming" phenomenon. As such, the study of slag is important in EAFs. One of the factors that determine foaming quality and efficiency is the presence of solid particles. MgO saturation is highly significant since, in addition to ensuring the pre
Mat. Res.. Publicado em: 30/11/2017
-
20. Cytotoxic diterpenoids from the roots of Salvia lachnocalyx
ABSTRACT Salvia lachnocalyx Hedge, Lamiaceae, is an endemic sage which grows naturally in the Fars Province of Iran. The phytochemical analyses of the roots of S. lachnocalyx led to the isolation of five known diterpenoids: ferruginol (1), taxodione (2), sahandinone (3), 4-dehydrosalvilimbinol (4) and labda-7,14-dien-13-ol (5). Their chemical structures were
Rev. bras. farmacogn.. Publicado em: 2017-08
-
21. Influence of Niobium and Molybdenum on Mechanical Strength and Wear Resistance of Microalloyed Steels
The HSLA (High-Strength Low Alloy) steels are used in the production of pipes, flanges and connectors to build ducts for ore, oil and gas transport. The conventional processes are the rolling or forging. In the transport of ore and heavy oil, the abrasive particles impair the surfaces and reduce the pipelines lifetime. Therefore, besides the mechanical prope
Mat. Res.. Publicado em: 05/06/2017
-
22. Experimental and computer thermodynamics evaluations of an Al-Si-Coating on a quenchable steel
Abstract High-strength steels are commonly used in the automobile industry in order to reduce the weight of the vehicles. However, a technical difficulty appears due to the need of hot stamping of the components, which leads to oxidation. Therefore, the application of a coating on the substrate to avoid high-temperature oxidation is used. In this work, exper
REM, Int. Eng. J.. Publicado em: 2017-03
-
23. Plano Brasil sem Miséria: a frágil receita disponível dos municípios de Minas Gerais para a proposta de custeio da Atenção Básica
O artigo analisa a sustentabilidade econômico-financeira requerida para a cobertura da Atenção Básica (AB) nos municípios de Minas Gerais selecionados pelo Governo Federal para atuação em saúde no âmbito do Plano Brasil sem Miséria (BSM). Para desenvolver o estudo, foram pesquisadas as bases de dados do Sistema de Informações sobre Orçamentos P�
Physis. Publicado em: 2013-12
-
24. Metaparentagem: uma nova possibilidade de avaliar a parentagem
No presente trabalho objetiva-se apresentar um novo constructo cognitivo para analisar o relacionamento entre pais e filhos: a metaparentagem, definida como um conjunto de processos encobertos que resultam em uma compreensão mais abrangente da parentalidade, de modo que a metaparentagem consiste em pensar ou refletir a respeito das próprias práticas paren
Psicol. estud.. Publicado em: 2013-03