Rubber Compounds
Mostrando 1-12 de 37 artigos, teses e dissertações.
-
1. Gênero Cryptostegia: fitoquímica, atividades biológicas e aplicações industriais
The genus Cryptostegia comprises two species, C. madagascariensis (Bojer) and C. grandiflora (Roxb. Ex R. Br) that belong to the Apocynaceae family and are widely distributed in the tropics, as in Australia, New Zealand, India and Brazil, where they cause great socioeconomic and environmental damage, as they are invaders causing damage, mainly in the cultiva
Quím. Nova. Publicado em: 2021-06
-
2. Prediction of Mechanical and Functional Features of Aged Rubber Composites Based on BR/SBR; Structure-Properties Correlation
In this study, the structure-properties relationship between the thermal factors of BR/SBR blends [normalize factor h BR 100 hBR 100 − hBR x, and the maximum peak temperature difference of thermal decomposition of BR and SBR Δ T max = T max BR − T max SBR ] with their aging time (1 to 40 days) was demonstrated using DTG profile of uncu
Mat. Res.. Publicado em: 20/01/2020
-
3. ARTIFACTS IN THE ANALYSIS AND ASSESSMENT OF LOW-COST CONTAINERS FOR SAMPLING AND STORING GREENHOUSE GASES
The objectives of this study were twofold: to assess two chromatographic methods for the analysis of greenhouse gases (GHG) and carbon monoxide, and to propose and evaluate a low-cost and reusable alternative system for their sampling and storage, using 10 different container configurations (flasks and bags). To that end, standard samples containing the gase
Quím. Nova. Publicado em: 2019-01
-
4. Characterization of additives in NR formulations by TLC-IR (UATR)
Abstract It is a well-established fact that rubber accelerator is essential to provide solution in different sectors. However, there is a reversal process which can reduce the material performance. Sulfur accelerators donors and organic peroxides have been presented as a solution to the problem. The methodology development that can separate or characterize
Polímeros. Publicado em: 10/07/2018
-
5. Damping of the Woodwind Instrument Reed Material Arundo donax L
The viscoelastic properties (E', G', tanΦ, δ) of Arundo donax (AD) and a polypropylene-beech fiber composite (PPC) were measured from RT to 580K for various frequencies and strains. E' of AD varies between 5250-6250MPa depending on ageing at RT while E'(RT)=2250MPa of PPC is signifcantly lower. E' of the AD is higher than E' of PPC in the whole investigate
Mat. Res.. Publicado em: 04/06/2018
-
6. Epoxidized natural rubber and hydrotalcite compounds: rheological and thermal characterization
Abstract Epoxidized natural rubber (ENR) and synthetic non-modified hydrotalcite (HT) compounds were prepared and evaluated. Natural rubber (NR) was epoxidized with 20.6% of epoxy groups from a chemical modification of the latex. A sulfur-based curing system formulation with accelerators was used. The amounts of HT in the ENR-HT compositions was varied betwe
Polímeros. Publicado em: 21/09/2017
-
7. Evaluation of silanes in SBR 1502 / Telinne Monspessulana flour composites
Abstract A comparative study was performed on the effect of the addition of silane coupling agents (SCA), vinyltrimethoxysilane (VTMS) and 3-aminopropyltriethoxysilane (APTES) to a mixture of styrene butadiene rubber SBR1502 with Telinne Monspessulana flour (TMF). SCA was directly added into the mixture using untreated and mercerized TMF. Also, TMF and SBR15
Polímeros. Publicado em: 29/06/2017
-
8. Kinetic behavior of the reaction between silica and epoxidized liquid rubber
Abstract The use of epoxidized rubber as compatibilizer in silica-filled rubber compounds has been proposed in literature. However, the investigation of the reaction kinetics between the epoxy groups and the hydroxyl groups at the silica surface is not yet described. It is a difficult task, mainly because of the high dilution of the system due the difficulty
Polímeros. Publicado em: 08/12/2016
-
9. SÍNTESE E CARACTERIZAÇÃO DE NOVOS ORGANOMETÁLICOS DE ESTANHO (IV) COM LIGANTES DITIOCARBIMATOS E SUA AÇÃO ACCELERADORA NA VULCANIZAÇÃO DE BORRACHA NITRÍLICA
This paper describes the synthesis of four new organotin compounds of general formula: (Ph4P)[Sn(Cy)3(RSO2N=CS2)] [Ph4P = tetraphenylphosphonium cation, Cy = cyclohexyl, R = C6H5 (1), 4-ClC6H4 (2), 4-BrC6H4 (3) and 4-IC6H4 (4)]. They were obtained by the reaction between four different potassium N-R-sulfonyldithiocarbimate salts and tricyclohexyltin chloride
Quím. Nova. Publicado em: 2016-08
-
10. Natural rubber latex: determination and interpretation of flow curves
AbstractAs consumers become more demanding, the importance grows of guaranteeing the quality of products. The employment of reliable testing techniques that assure the origin and characteristics of the inputs used by industry is a key factor in this respect. In the rubber processing industry, the most commonly used characterization tests include determinatio
Polímeros. Publicado em: 2015-08
-
11. Sugarcane bagasse ash: new filler to natural rubber composite
Waste recycling has been the subject of numerous scientific researches regarding the environmental care. This paper reports the redirecting of sugarcane bagasse ash (SBA) as new filler to natural rubber (NR/SBA). The NR/SBA composites were prepared using an opened cylinder mixer to incorporate the vulcanization agents and different proportions of residue (SB
Polímeros. Publicado em: 2014-12
-
12. Equipamento de baixo custo para extração em fase sólida em amostras aquosas de grande volume utilizando pressão positiva de N
Extraction/concentration is a crucial step for the analysis of organic compounds at trace level concentrations and dispersed in complex matrices. Solid-phase extraction (SPE) is one of the techniques used for this purpose. In this work, a low cost apparatus for SPE was developed that uses nitrogen under positive pressure and ensures the maintenance of the sa
Quím. Nova. Publicado em: 2014