Roughness
Mostrando 1-12 de 738 artigos, teses e dissertações.
-
1. Methodology for evaluation of the influence of roughness and capillary absorption of ceramic blocks on the render’s tensile bond strength
Abstract The literature indicates that it is difficult or even impossible to associate with strong statistical confidence the bond strength of a mortar coating with the properties of the ceramic block, such as roughness and water absorption. In this work, it is assumed that the variability in capillary water absorption and roughness, and the use of methods t
Cerâmica. Publicado em: 2022
-
2. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
3. Art and science: impact of semioccluded vocal tract exercises and choral singing on quality of life in subjects with congenital GH deficiency
ABSTRACT Objectives: Currently, not much is known about the interactions between voice and growth hormone (GH). We have described large kindred with isolated GH deficiency (IGHD) due to a GHRH receptor mutation, resulting in severe short stature and high-pitched voice. These IGHD individuals have little interest in GH treatment, as they consider themselves
Archives of Endocrinology and Metabolism. Publicado em: 2022
-
4. Biogenic synthesis of silver nanoparticles from thyme extract for functionalization of a bioactive glass produced from rice husk ash
Abstract The rice husk, agro-industrial residue, stands out for having silica, the main oxide former of the bioactive glass. To avoid contamination in this biomaterial, substances with bactericidal properties, like silver can be incorporated. Thus, the objective of this work is the synthesis of silver nanoparticles to functionalize a bioactive glass synthesi
Cerâmica. Publicado em: 2022
-
5. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. Effect of gastric acid on the surface roughness and bacterial adhesion of bulk-fill composite resins
Resumo O objetivo deste estudo in vitro foi avaliar o efeito do ácido gástrico na rugosidade superficial e na formação do biofilme nas resinas compostas de incremento único. Vinte e sete amostras de cada resina composta foram confeccionadas: G1: Filtek Z250 XT (Z250), G2: Filtek Bulk Fill (FTK), G3: Tetric N-Ceram Bulk Fill (TTC), and G4: Aura Bulk Fill
Brazilian Dental Journal. Publicado em: 2022
-
7. Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel
REM, Int. Eng. J.. Publicado em: 2021-01
-
8. Temporal Evolution of Roughness Development on Polymer Surfaces Exposed to Non-Thermal Plasma
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
9. COVID-19, Sistema Renina-Angiotensina, Enzima Conversora da Angiotensina 2 e Nicotina: Qual a Inter-Relação?
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
Arq. Bras. Cardiol.. Publicado em: 2020-10
-
10. A MULTIPLE CRITERIA ANALYSIS OF FACTORS INFLUENCING SURFACE ROUGHNESS OF WOOD AND WOOD-BASED MATERIALS IN THE PLANING PROCESS
ABSTRACT This paper presents a study of the fuzzy analytical hierarchy process (FAHP) for the prioritization of factors having important effects on the surface roughness of wood and wood-based materials in the planing process. Firstly, a three-level hierarchical model was devised. Secondly, the FAHP method was employed to determine the weights of the factor
CERNE. Publicado em: 2020-03
-
11. Synthesis of New Phenolic-Schiff Base and Its Application as Antioxidant in Soybean Biodiesel and Corrosion Inhibitor in AISI 1020 Carbon Steel
New Schiff base compound N, N’-bis-(4-hexadecanate)-salicylethylenediamine (named IM) was synthesized, and characterized via infrared and nuclear magnetic ressonance spectroscopies. IM was tested as corrosion inhibitor and antioxidant in soybean biodiesel. Corrosion studies were developed with AISI 1020 carbon steel in a three-step accelerated corrosion as
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
12. Effect of Etching Temperature on Surface Properties of Ti6Al4V Alloy for Use in Biomedical Applications
The objective of this study is to evaluate the surface physicochemical properties of Ti6Al4V alloy after etching with a piranha’s solution at temperatures of 25 °C, 40 °C, and 60 °C for 30 min. Scanning electron microscopy with energy-dispersive X-ray spectroscopy, optical profilometry, X-ray diffraction, and wettability analyses were used to characteri
Mat. Res.. Publicado em: 10/01/2020