Roughness Average
Mostrando 1-12 de 62 artigos, teses e dissertações.
-
1. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Properties of zirconia-containing glass-ionomer cement
Resumo Cimentos de ionômero de vidro (CIVs) são utilizados como materiais restauradores dentários devido à sua capacidade de aderir quimicamente ao esmalte e à dentina, baixo coeficiente de expansão térmica e compatibilidade com estruturas dentárias. No entanto, esses materiais têm baixa resistência ao desgaste e fraturas. Neste trabalho, CIVs refo
Cerâmica. Publicado em: 15/08/2019
-
3. Electrospinning synthesis and assessment of physicochemical properties and biocompatibility of cobalt nitrate fibers for wound healing applications
Abstract: The aim of this study was to develop polyurethane (PU) wound dressing incorporated with cobalt nitrate using electrospinning technique. The morphology analysis revealed that the developed composites exhibited reduced fiber and pore diameter than the pristine PU. The electrospun membranes exhibited average porosity in the range of 67% - 71%. Energy-
An. Acad. Bras. Ciênc.. Publicado em: 29/07/2019
-
4. Tribology of natural Poly-Ether-Ether-Ketone (PEEK) under transmission oil lubrication
Abstract High performance polymeric materials such as poly-ether-ether-ketone (PEEK) are increasingly being used for challenging tribological applications in order to replace metal parts in vehicle engines and transmissions. The tribology of natural PEEK, under oil-lubricated conditions, was studied for different metal counterbody finishes. Two different fin
Polímeros. Publicado em: 04/07/2019
-
5. Influence of a Femtosecond Laser Surface Modification on the Fatigue Behavior of Ti-6Al-4V ELI Alloy
The objective of this investigation was to evaluate the influence of surface modification by femtosecond laser (with average fluence of 0.6 J/cm2 and scanning speed of 0.1 mm/s) on the fatigue resistance of Ti-6Al-4V ELI alloy. A significant reduction in the fatigue strength of the material modified by laser was observed. Residual tensile stresses generated
Mat. Res.. Publicado em: 01/07/2019
-
6. Análise da rugosidade superficial de barras de aço SAE 1045 após torneamento
RESUMO Neste trabalho foram investigadas as influências de alguns dos principais fatores do torneamento sobre o acabamento da superfície e a rugosidade de uma peça torneada. Foram analisadas barras de aço SAE 1045 torneadas em um torno controle numérico computadorizado (CNC), com auxílio da técnica de Planejamento de experimentos (DOE) para formar tri
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. PEEK Physical Surface Modification: Evaluation Of Particles Leaching Process
Polyetheretherketone (PEEK) has been prominent in orthopedic implants; however, it is inert, preventing interaction between the implant and adjacent bone tissues. One way to overcome this characteristic is physical modification its on surface by particle leaching promoting greater osseointegration. The objective of this research was to develop and characteri
Mat. Res.. Publicado em: 14/02/2019
-
8. Vocal assessment of addicts on methadone therapy via the RBH scale and objective acoustic parameters
Resumo Introdução: Um grande número de pessoas em todo o mundo luta diariamente para livrar-se de seu vício em substâncias psicoativas ilegais. Com o objetivo de criar uma atmosfera de supervisão melhorada, comunicação estabelecida e melhora da qualidade de vida para drogaditos, foram criados centros que fornecem a substância substitutiva metadona.
Braz. j. otorhinolaryngol.. Publicado em: 2019-02
-
9. Short-term Creep Properties and Fracture Surface of 18 Ni (300) Maraging Steel Plasma Nitrided
Plasma nitriding of a solution annealed and aged 300 grade maraging steel was studied aiming to increase the creep resistance. The surface microhardness reached 1,140 HV, producing 50 µm layer composed of ε-Fe3N and γ'-Fe4N nitrides at the uppermost sample layer. The inner core remained unaltered presenting typical plate-like martensite microstructure of
Mat. Res.. Publicado em: 13/03/2017
-
10. Bias voltage influence on the mechanical and tribological properties of titaniumaluminum nitride coatings produced by triode magnetron sputtering
TixAl1-xN coatings were grown using the triode magnetron sputtering technique with various bias voltages between -40 V and -150 V. As the bias voltage increased, an increase in the Al atomic percentage was observed, presenting a competition with Ti and producing structural changes. Moreover, the grain size and roughness were also strongly influenced by the b
Matéria (Rio J.). Publicado em: 2015-03
-
11. Morphological characterization with image analysis of cocoa beverage powder agglomerated with steam
In this study, the morphological characteristics of cocoa beverage powder granules under minimal, average, and maximal process conditions of a steam agglomerator were studied. a stereoscopic microscope coupled to a digital camera was used for the morphological analysis. The images were analyzed to obtain shape and size descriptors. aiming to evaluate the des
Food Sci. Technol. Publicado em: 2014-12
-
12. Degradation of orthodontic wires under simulated cariogenic and erosive conditions
This study examined the effect of cariogenic and erosive challenges (CCs and ECs, respectively) on the degradation of copper-nickel-titanium (CuNiTi) orthodontic wires. Sixty wire segments were divided into four treatment groups and exposed to CCs, ECs, artificial saliva, or dry storage (no-treatment control). CC and EC were simulated using a demineralizing
Braz. oral res.. Publicado em: 04/08/2014