Roofing
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. Pressed roofing tile based on cementitious material and basalt powder: Technological and toxicological characterization
Abstract This study aims to develop a pressed concrete roofing tile from powder technology containing basalt powder in substitution of fine sand (aggregate) for application in building covers. Specimens were submitted to technological and toxicological characterization. Hence, pressed specimens based on cement and basalt powder were analyzed. In the bending
REM - International Engineering Journal. Publicado em: 2022
-
2. Mineralogy and preliminary assessment of the potential uses of alluvial clays from Batouri (Eastern-Cameroon)
Resumo Este estudo teve como objetivo avaliar os usos potenciais de materiais argilosos aluviais de Batouri. Suas características mineralógicas, químicas e algumas físico-mecânicas são apresentadas, bem como algumas características de tijolos queimados em 900, 950, 1000, 1050 e 1100 °C. As matérias-primas consistiram de caulinita, quartzo, feldspato
Cerâmica. Publicado em: 15/08/2019
-
3. Investigação da corrosão eletrolítica em telhas de aço recobertas com zincalume
RESUMO As telhas de aço usadas em galpões de fazendas expostas às intempéries ficam vulneráveis à degradação. A corrosão surge devido à diferença de potencial elétrico entre a superfície metálica e o meio, levando a um carregamento elétrico dessa superfície. Elas então necessitam da proteção de um recobrimento anticorrosivo, cujo objetivo
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Potential Slow Release Fertilizers and Acid Soil Conditioners Obtained by One-Pot Mechanochemical Activation of Chrysotile:Cement Roofing Sheets with K2HPO4
Chrysotile:cement roofing sheets were milled with and without K2HPO4. As indicated by X-ray diffraction (XRD), the samples crystallinities were reduced with the increasing milling time. The same tendency was observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), with disaggregation of the chrysotile fiber bundles and forma
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
5. Broiler-Housing Conditions Affect the Performance
ABSTRACT In the last decades animal production has considerably increased worldwide to sustain an ever-growing human population. Among animal reared for consumption purposes, chickens are undoubtedly one of the most successful, mainly due to their rapid growth rate. The development of broiler farming has been accompanied in recent years by a substantial atte
Rev. Bras. Cienc. Avic.. Publicado em: 2017-06
-
6. Evaluation of the Incorporation of Waste Generated from Titanium Dioxide Manufacturing in Red Ceramics
Rotary-vacuum-filter mud (RVFM) is waste generated during the manufacturing process of titanium dioxide. In this work, RVFM and ceramic bricks containing different ratios of this waste are investigated. The mud samples were characterized using thermal analysis (TG/DTG). The aim of the present work was to determine the effect of adding RVFM on the ceramic pro
Mat. Res.. Publicado em: 2015-02
-
7. Avaliação de diferentes materiais de cobertura para construção do telhado de aviários móveis
This research aimed to: 1) was to test different materials of cover the roof of aviaries furniture on thermal comfort indices for birds; and 2) was to evaluate the surface temperature and cloacal broiler chickens raised in aviaries furniture, with different covers for the roof. To test different roofing materials for the roof aviaries were built three mobile
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/02/2012
-
8. Effect of electron beam irradiation on the mechanical properties of buriti fiber
Natural fibers, mainly those lignocellulosic extracted from plants, have, in the past few decades, attracted the attention not only of scientists but also of industrial technologists of our society interested in their engineering materials. As it is well known, uses of natural fiber in clothes carpets, baskets, ropes and low cost construction roofing has exi
Matéria (Rio J.). Publicado em: 2012
-
9. Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica
O presente estudo teve como objetivo comparar o desempenho térmico entre telhas de material reciclado (resíduos de embalagens acartonadas com película aluminizada) e as telhas de fibra e betume, fibrocimento e cerâmica vermelha com a finalidade de verificar sua adequabilidade para uso em clima quente e úmido de baixa latitude. As amostras foram selecion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/11/2011
-
10. O uso do pet em telhas translúcidas visando o conforto natural lumínico e térmico / The use of pet in translucent roofing in order to a luminous, thermal and natural comfort
O PET, tereftalato de etileno, é o material mais conhecido e apropriado na fabricação de várias embalagens de produtos alimentícios, entre as quais se destacam as garrafas de refrigerante. A correta gestão dos resíduos sólidos urbanos, com a transformação desses resíduos para o retorno ao uso, e a educação ambiental são tarefas essenciais para
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/09/2011
-
11. A pré-fabricação de dois sistemas de cobertura com madeira de florestas plantadas. Estudos de casos: os assentamentos rurais Pirituba II e Sepé Tiaraju / The two prefabricated roofing systems with soft-wood from reforestations. Case studies: the rural settlements Pirituba II and Sepé Tiaraju
Grande parte das moradias brasileiras apresenta coberturas inadequadas, conforme indicação de pesquisa sobre o deficit habitacional. A carpintaria dessas coberturas necessita de mão de obra qualificada e materiais de custos elevados, porém, na maioria dos casos ainda hoje utiliza processo construtivo artesanal. O objetivo deste trabalho é identificar qu
Publicado em: 2011
-
12. Study of the mechanical properties of the hot dip galvanized steel and galvalume®
Steel sheet coated with zinc or 55%Al-Zn is widely used at the civil construction, mainly for roofing and cladding applications. The 55%Al-Zn coated steel shows mechanical properties slightly different from zinc coated steel, even under the same heat cycle processing, due to the higher molten metal temperature and also to the higher strength of the 55%Al-Zn
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-12