Robot Control
Mostrando 25-36 de 99 artigos, teses e dissertações.
-
25. Estudo exploratÃrio de parÃmetros de soldagem de revestimentos com ligas de NÃquel empregando o processo TIG com alimentaÃÃo de arame frio / Exploratory study of coating welding parameters with nickel alloys using GTAW with cold wire feeding
The aim of this work was to carry out a systematic study of GTAW welding parameters with feeding of cold wire for covering application of nickel alloys (UNS N06625, UNS N06686 and UNS N10276) in substract of steel C-Mn considering the analysis of geometric, economic and operational characteristics of layers, form to adjust these coverings for the industries
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/01/2009
-
26. Underactuated manipulator robot control via H2, H∞, H2/H∞, and µ-synthesis approaches: a comparative study
ABSTRACT This paper deals with robust control of underactuated manipulator robots. It presents a comparative study of four combined controllers H2, H∞ , H2/H∞ and µ-synthesis, pluscomputed torque method. These controllers are applied in an actual underactuated manipulator robot with 3 degrees of freedom, of which joints can be configured as active or pa
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-12
-
27. Robotic-assisted partial nephrectomy: surgical technique using a 3-arm approach and sliding-clip renorrhaphy
INTRODUCTION: For the treatment of renal tumors, minimally invasive nephron-sparing surgery has become increasingly performed due to proven efficiency and excellent functional and oncological outcomes. The introduction of robotics into urologic laparoscopic surgery has allowed surgeons to perform challenging procedures in a reliable and reproducible manner.
International braz j urol. Publicado em: 2009-04
-
28. Development of an open robot manipulator system for education. / Desenvolvimento de um sistema aberto para ensino de robôs manipuladores.
This text describes the project development to aid the robot manipulator learning at undergraduate courses using a PC-based architecture with security system and real time software. The system allows the students to test previous solutions and configure their own alternatives for simulating and controlling a real robot manipulator with up to six degrees-of-f
Publicado em: 2009
-
29. COMPARAÇÃO ENTRE CONTROLES LOOK-AND-MOVE E SERVO-VISUAL UTILIZANDO TRANSFORMADAS SIFT EM MANIPULADORES DO TIPO EYE-IN-HAND / COMPARISON BETWEEN LOOK-AND-MOVE AND VISUAL SERVO CONTROL USING SIFT TRANSFORMS IN EYE-IN-HAND MANIPULATOR SYSTEMS
Computer vision can be used to calibrate and self-localize robots. There are many applications in self-localization and control applied to industrial manipulators and mobile robots. In particular, visual control can be useful in submarine interventions, where a robotic manipulator is mounted on a Remote Operated Vehicle (ROV) to execute tasks at high depths,
Publicado em: 2009
-
30. Telescopic continuum robot for tasks at high positions. / Robô contínuo telescópico para tarefas em alturas elevadas.
Among several applications of robots in the service field, it is possible to percept an increasing interest in manipulate tools in higher positions using automatic devices, due to the fact that such activities are high risked operations and demands the use of several safety equipments. The most common examples of this kind of activity are the inspection of m
Publicado em: 2009
-
31. Controle de movimentos coordenados de robôs móveis quando os robôs assumem a liderança de maneira aleatória / Control of coordinated movements of mobile robots when the robots take the lead in a random
This dissertation proposes a study on the automatic control of dynamic systems to the problem of coordination of mobile robots. The coordinated motions are performed with the robots following a leader, and any robot of the formation can assume the leadership randomly. The robots exchange informations according to a pre-specified communication directed graph
Publicado em: 2009
-
32. Dispositivo automático para auxiliar a manipulação de cargas. / Automatic device to assist the handling materials.
The material handling is one task in which robot is commonly employed to replace the human work because it has some advantages such as, higher precision in the handling and higher speed of the task, and to increase operator safety. Despite these advantages, the robotic device is most employed only in situation that speed and precision are essential; in other
Publicado em: 2009
-
33. Comportamento de líquidos no espaço-sloshing e amortecedores de nutação viscosos / Fluid behavior in the space-sloshing and viscous nutation dampers
The attitude dynamics refers to the space vehicle motion around its center of mass while orbiting the Earth. The knowledge of the attitude motion is fundamental for the accomplishment of the space mission objectives. The use of appropriate sensors and actuators, onboard computers, GPS and radars and ground stations are among technologies allowing the attitud
Publicado em: 2009
-
34. ADAPTIVE CONTROL APPLIED TO A TWO-DEGREE-OF-FREEDOM PLANAR MANIPULATOR ROBOT / Controle adaptativo aplicado em um robô manipulador de dois graus de liberdade planar
A presente tese tem como objetivo o modelamento e controle em tempo real de um robô manipulador de dois graus de liberdade planar, constituído de um elo rotacional e outro prismático. O elo rotacional é um perfil U em alumínio e tem como atuador um motor-redutor de corrente contínua. O elo prismático é composto por um cilindro pneumático de dupla a�
Publicado em: 2009
-
35. Projeto e construção de um robô cartesiano com acionamento pneumático
O presente trabalho trata do projeto, construção e análise de desempenho de um robô pneumático com três graus de liberdade. Foi fundamentado no trabalho de Frasson (2007) com alterações na escolha de componentes que permitissem a redução de custos. Tem como objetivo verificar se um robô comandado por válvulas solenóide rápidas, e controlado pel
Publicado em: 2009
-
36. An approach to avoid obstacles in mobile robot navigation: the tangential escape
An approach to guide a mobile robot from an initial position to a goal position avoiding any obstacle in its path, when navigating in a semi-structured environment, is proposed in this paper. Such an approach, hereinafter referred to as tangential escape, consists in changing the current robot orientation through a suitable combination of the values of the a
Sba: Controle & Automação Sociedade Brasileira de Automatica. Publicado em: 2008-12