Rietveld Refinement
Mostrando 1-12 de 68 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
3. Synthesis and characterization of α-SnWO4 powders obtained by microwave-assisted hydrothermal method
Abstract The structural, morphological, and optical properties of α-SnWO4 synthesized by microwave-assisted hydrothermal method at 150 °C for different times were investigated. XRD revealed the formation of the orthorhombic phase, without the presence of a secondary phase. The sample processed for 64 min showed a reduction in unit cell volume, suggesting a
Cerâmica. Publicado em: 2022
-
4. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
5. QUANTIFICAÇÃO DE MULLITA PROVENIENTE DE RESÍDUOS DE CAULIM DA REGIÃO AMAZÔNICA: USO DO MÉTODO DE RIETVELD
Mullite is used to obtain a refractory material, there are several factors that influence the synthesis process of mullite: the preparation of the mixture, the precipitation and the reaction of SiO2 and Al2O3. For the synthesis of mullite, samples of kaolin processing residues were used as precursor material, because it presents SiO2 and Al2O3 in its composi
Quím. Nova. Publicado em: 2021-04
-
6. Perovskite-Type Oxides La0.6M0.4Ni0.6Cu0.4O3 (M = Ag, Ba, Ce) towards the Oxygen Reduction Reaction (ORR) in Alkaline Medium: Structural Aspects and Electrocatalytic Activity
In this work, La0.6M0.4Ni0.6Cu0.4O3 (M = Ag, Ba, and Ce, denoted as LANC, LBNC, and LCNC, respectively) electrocatalysts were synthesized by the Pechini method at 1023 K for two hours in air. Rietveld refinement allowed the identification of the crystallographic phases present in all oxides. The electrocatalytic performance of these oxides towards the oxygen
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
7. Reusable Heterogeneous SnO2/ZnO Catalyst for Biodiesel Production from Acidified/Acid Oils
A catalyst comprised of SnO2 impregnated on ZnO nanowires, which presented remarkable ability to catalyze fatty acid esterification/transesterification reactions, is reported. For optimization of reaction conditions, artificially acidified soybean oil with 10 wt.% oleic acid was used as a model feed. The optimized conditions were: 150 °C, 6 h, 5 g of oil, c
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
8. Crystallographic Changes Accompanying the Verwey Transition in a Magnetite from Steatite
The crystallographic structural analysis of the magnetite of a steatite rock at 298 K, (saturation magnetization, σ = 95.0 J T-1 kg-1) showed two cubic networks and, below Verwey temperature (TV ca.120 K) a monoclinic structure, basing on their cell dimensions and different transitional behaviors when reducing the temperature. A monoclinic structure was ide
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
9. Screening of the Au:Pt Atomic Ratio Supported in SrCO3: Effects on the Performance of the Solvent-Free Oxidation of Benzyl Alcohol
We have prepared, by a sol-immobilization method, bimetallic catalysts with different Au:Pt atomic ratios supported on commercial SrCO3. The catalytic performance for the oxidation reaction of benzyl alcohol of such materials was compared to the monometallic counterparts, aiming at the obtaining of the best composition of the material. It was found that the
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
10. Experimental and Theoretical Study of LiMn2O4 Synthesized by the Solution Combustion Method Using Corn Starch as Fuel
Lithium manganese oxide, LiMn2O4, was synthesized in two temperature stages, where the first consisted by an ecofriendly solution combustion method at 300 °C. Finally, the as-burned powders were thermal treated at 500 and 700 °C. The structural and morphological changes were evaluated by the Rietveld method and density functional theory (DFT) calculations.
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
11. Nb-Al Binary System: Reevaluation of the Solubility Limits of the (Nb), Nb3Al, Nb2Al and NbAl3 Phases at High Temperatures
In this work a re-investigation of the solubility limits of the (Nb), Nb3Al, Nb2Al and the Nb-rich side of the NbAl3 phases on the Nb-Al system is presented. Alloys in the binary fields ((Nb)+Nb3Al, Nb3Al+Nb2Al and Nb2Al+NbAl3) were arc-melted, and then equilibrated at 1000, 1200 and 1400 ºC. The phases were confirmed via X-ray powder diffractometry, and th
Mat. Res.. Publicado em: 25/11/2019
-
12. Obtenção de ferritas de cálcio dopadas com cromo visando aplicação em esmaltes transparentes brilhante e mate
RESUMO Este trabalho tem como objetivo obter óxidos com estrutura tipo espinélio de composição CaFe1,8Cr0,2O4 pelo método gelatina, visando aplicação em esmaltes transparentes brilhantes e mate. Os pós precursores, resultantes do processo de síntese, foram calcinados a 600 °C e a 800 °C para a obtenção da fase espinélio. Os pós foram caracteri
Matéria (Rio J.). Publicado em: 25/11/2019