Resistance And Durability
Mostrando 13-24 de 60 artigos, teses e dissertações.
-
13. Dry Shrinkage and Durability Performance of Cement Stabilized Graded Stone with Framework and Dense Structure
In this paper, the mechanical, dry shrinkage and frost resistance performance of cement stabilized graded stone with framework and dense structure were investigated. A higher cement content owns a correspondingly better mechanical performance. With the different moisture content, the dry shrinkage and frost resistance performance of cement stabilized graded
Mat. Res.. Publicado em: 19/02/2016
-
14. Mechanical and Durability Performance of Polyacrylonitrile Fiber Reinforced Concrete
In this paper, the impact toughness, autogenous shrinkage, chloride penetration resistance, permeability resistance and abrasion resistance performance of prepared concrete reinforced with Polyacrylonitrile fiber (PAN fiber) were researched. The PAN fiber volume concentration percentages of cement were 0, 0.5%, 1.0%, 1.5% and 2.0%, respectively. The results
Mat. Res.. Publicado em: 03/11/2015
-
15. New Sol-gel Formulations to Increase the Barrier Effect of a Protective Coating Against the Corrosion and Wear of Galvanized Steel
This study proposes a new pretreatment method that uses alkoxide precursors with a plasticizing agent; the purpose of this study is to improve the electrochemical and mechanical properties of a galvanized steel surface. Galvanized steel was covered with a hybrid film obtained from a sol that consisted of two alkoxide precursors, 3 - (trimethoxysilylpropyl) m
Mat. Res.. Publicado em: 2015-02
-
16. Mechanical performance of concrete with incorporation of coarse waste from the marble industry
The waste resulting from marble extraction process is usually disposed of in landfills or dumps and its accumulation is causing serious environmental and landscaping problems. One way of reusing marble waste is to consider its incorporation in structural concrete as a non-primary aggregate. This research work attempts to alleviate the situation and provide i
Mat. Res.. Publicado em: 30/09/2014
-
17. Study of mechanical properties and durability of magnesium phosphate cement matrix containing grinding dust
The acid-base cements are materials developed by means of reactions between an acid component and another basic one. This type cement belongs to the family of the so called "chemically bonded phosphate ceramics" (CBPCs), new types of inorganic materials that have special physico-chemical properties and that, in contrast to most advanced ceramics, are made by
Mat. Res.. Publicado em: 02/07/2013
-
18. ESTUDO DE UM REATOR SOLAR HÍBRIDO PARA CURA ACELERADA DO CONCRETO EM ÁGUA MORNA. / STUDY OF A HYBRID SOLAR REACTOR FOR ACCELERATED CURING OF CONCRETE IN WARM WATER.
The Portland cement concrete material is the most consumed after the water worldwide due to their versatility molding, strength and durability as a structural material. The curing is the procedure that aims to keep the concrete saturated with water in their early ages and it is essential to ensure the reactions of cement hydration, promoting its consolidatio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/11/2012
-
19. NANOCOLORAÇÃO DE LIGAS DE ALUMÍNIO / NANOCOLORING OF ALUMINUM ALLOYS
The use of aluminum becomes increasing because of the lightness of this metal and its high corrosion resistance. The anodization of the aluminum is now a well known and is widely used to increase the durability of the metal. This electrochemical technique forces the growth of oxide layer. The anodized layer has the peculiarity of having the nanotubes which a
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/03/2012
-
20. Cement mixtures containing copper tailings as an additive: durability properties
The effects of copper tailings as an additive, on some durability properties of cement mixtures were investigated. In each mixture, copper tailings addition levels by mass were 0%, 5% and 10%. Compared to the control samples, copper tailings blended pastes showed superior performance against autoclave expansion while insignificant decreases in sulfate resist
Mat. Res.. Publicado em: 09/10/2012
-
21. Vidros de germanato com nanopartículas metálicas e semicondutoras dopados com terras-raras para aplicações em fotônica. / Germanate glasses containing metalic an semiconductor nanoparticles dopes with rare-earth ions for photonic aplicattions.
This work presents a spectroscopic study about Eu3+, Nd3+ and Er3+ rare-earth doped germanate glasses containing metallic and semiconductor nanoparticles (NPs) aiming the development of new materials for photonic applications. These glasses have a large transmission window (400-4500 nm), high refractive index (~ 1.9), low phonon energy (700 cm-1), high mecha
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/09/2010
-
22. Inovações tecnológicas para o melhor aproveitamento do gesso nas construções
O gesso é um dos materiais de construção mais antigos que se tem conhecimento. Em virtude de ser um ligante menos agressivo ao ambiente que o cimento Portland, seu uso deve ser incentivado e suas novas aplicações estudadas. Este trabalho tem como objetivo a inovação tecnológica para a maior aplicação do gesso na construção civil, inclusive com o
Publicado em: 2010
-
23. Estudo de métodos e medidas auxiliares para o controle da resistência à carbonatação de concretos estruturais de cimento Portland. / Study of auxiliary methods and measurements to control carbonation resistance of Portland cement structural concrete.
A durabilidade das estruturas de concreto armado deve ser alcançada, entre outros fatores, pela adequação do concreto frente ao meio ambiente para proteger as armaduras pelas características da camada de cobrimento. Assim, concretos precisam ser corretamente especificados no projeto estrutural e ter a sua qualidade controlada durante a produção e aplic
Publicado em: 2010
-
24. EFEITOS NAS PROPRIEDADES MECÂNICAS, ELÁSTICAS E DE DEFORMAÇÃO EM CONCRETOS COM ALTOS TEORES DE ESCÓRIA E CINZA VOLANTE. / EFFECTS ON MECHANICAL, ELASTIC AND DEFORMATION PROPERTIES ON CONCRETE WITH HIGH LEVELS OF SLAG AND FLY ASH.
The use of byproducts and industrial waste as pozzolanic, is an alternative to achieve the sustainability, economy and durability in concrete structures. This survey has as its purpose to analyze the effect on mechanical, elastic and deformation properties on concrete with a high level of granulated slag from blast furnace and fly ash in place of Portland bu
Publicado em: 2009