Resin Transfer
Mostrando 1-12 de 41 artigos, teses e dissertações.
-
1. Mechanical Properties and Abrasive Wear of Different Weight Percentage of TiC Filled Basalt Fabric Reinforced Epoxy Composites
Fiber reinforced polymers are very rarely applied as wear-resistant materials because of the lack of good mechanical strength, which adversely affects the properties of the composites. To improve the mechanical and abrasive wear resistant of the composites, fillers are incorporated into the polymers. Hence in this work composites are produced by adding funct
Mat. Res.. Publicado em: 14/01/2019
-
2. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018
-
3. On the creep behavior of carbon/epoxy non-crimp fabric composites
The use of composites in structural applications requires the study of specific properties to ensure that these materials are safe and an excellent option to replace some metals, for example. In the present study, vacuum assisted resin transfer molding (VARTM) was used prior to obtain carbon/epoxy non-crimp fabric composites. Dynamic mechanical analysis and
Mat. Res.. Publicado em: 26/02/2018
-
4. Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process
ABSTRACT Resin Transfer Molding (RTM) process is commonly used to produce high quality polymeric composites with simple or complex geometries in small to large sizes. In RTM process a preformed reinforcement is positioned inside the mold cavity. This dry reinforcement is actually a fibrous porous media whereby resin will flow. The mold is then closed and res
Matéria (Rio J.). Publicado em: 20/07/2017
-
5. Mechanical Characterization of Composites Manufactured by RTM Process: Effect of Fiber Content, Strain Rate and Orientation
Abstract High performance composites are exposed to severe loading and environmental conditions. In this work, mechanical properties of Fiberglass Reinforced Polyester (FRP) manufactured by resin transfer molding were evaluated. The effect of the strain rate on mechanical properties under three quasi-static testing conditions, four fiber contents and several
Lat. Am. j. solids struct.. Publicado em: 2016-02
-
6. Photoelastic stress analysis in mandibular bone surrounding bar-clip overdenture implants
The aim of this in vitro study was to evaluate, using the photoelastic analysis method, the stress distribution in mandibular bone surrounding a bar-clip overdenture when 2 implant angulations were simulated. Two mandibular photoelastic models were manufactured, with 2 implants embedded in the interforaminal region: model 1 - PAPI, a photoelastic analysis mo
Braz. oral res.. Publicado em: 17/12/2013
-
7. Importance of a distal proximal contact on load transfer by implant-supported single adjacent crowns in posterior region of the mandible: a photoelastic study
OBJECTIVE: This study aimed to evaluate the importance of a distal proximal contact on the load transfer to the posterior region of the mandible by non-splinted adjacent implant-supported crowns using photoelastic stress analysis. MATERIAL AND METHODS: A rectangular model (68x30x15 mm) was made of polymethylmethacrylate resin to simulate half of the mand
J. Appl. Oral Sci.. Publicado em: 2013-09
-
8. DISPONIBILIDADE E TRANSFERÊNCIA DE NITROGÊNIO, FÓSFORO E POTÁSSIO EM UM ARGISSOLO SUBMETIDO À APLICAÇÃO DE FONTES DE NUTRIENTES / AVAILABILITY AND TRANSFER OF NITROGEN, PHOSPHORUS AND POTASSIUM IN SANDY TYPIC HAPLUDALF SOIL SUBMITTED TO THE APPLICATION OF SOURCES OF NUTRIENTS
The swine and cattle activities are of great economic and social importance in Brazil in the southern region, but generate of large volumes of waste, that when applied to the soil can be mineralized and part of the nutrients released can be absorbed by plants or transferred by runoff or percolation. The aimed of this study was to evaluate the rate of mineral
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
9. Simulação numérica em elementos finitos, fabricação e ensaio experimental de um olhal em material compósito
O trabalho aborda os procedimentos experimentais necessários para o desenvolvimento de uma técnica de fabricação de um olhal em materiais compósitos via moldagem por transferência de resina (Resin Transfer Molding - RTM) e a metodologia de análise, utilizando elementos finitos, que permite simular o comportamento deste tipo de componentes estruturais
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/02/2012
-
10. Three-dimensional numerical modeling of RTM and LRTM processes
Resin Transfer Molding (RTM) is a manufacturing process in which a liquid resin is injected into a closed mold pre-loaded with a porous fibrous preform, producing complex composite parts with good surface finishing. Resin flow is a critical step in the process. In this work, the numerical study of the resin flow in RTM applications was performed employing a
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-06
-
11. A numerical investigation of the resin flow front tracking applied to the RTM process
Resin Transfer Molding (RTM) is largely used for the manufacturing of high-quality composite components and the key stage during processing is the resin infiltration. The complete understanding of this phenomenon is of utmost importance for efficient mold construction and the fast production of high quality components. This paper investigates the resin flow
Materials Research. Publicado em: 12/08/2011
-
12. Evaluation of the accuracy of different transfer impression techniques for multiple implants
The aim of this study was to evaluate the accuracy of three implant transfer impression techniques. Four groups (n = 5) were defined, according to the technique: TC - tapered copings without splint; SC - square copings without splint; SCS - square copings splinted with dental floss and acrylic resin, and CG (control group) - master model with four external h
Brazilian Oral Research. Publicado em: 2011-04