Resilient Modulus
Mostrando 25-31 de 31 artigos, teses e dissertações.
-
25. Estudo em laboratório e em campo de misturas asfálticas SMA 0/8S. / Study in laboratory and field of asphalt mixtures SMA 0/8S.
Esta pesquisa foi baseada em um projeto de Stone Matrix Asphalt - SMA na faixa 0/8S com asfalto CAP 20, feito para a execução de revestimento delgado em trecho experimental na Rodovia Presidente Dutra, ligando São Paulo ao Rio de Janeiro. A ocorrência de alguns defeitos neste trecho experimental motivou o estudo de misturas SMA 0/8S alternativas empregan
Publicado em: 2005
-
26. Influence evaluation of some factors in the mechanical properties of binder mixtures using design and analysis of asymmetric fractional factorial experiments technique / Avaliação da influência de alguns fatores nas propriedades mecânicas de misturas asfálticas densas, à luz da técnica de planejamento e análise de experimentos fatoriais fracionários assimétricos
This work deals with the influence of some factors in the mechanical behavior of asphalt mixtures stability and flexibility. Three types of binders were tested, conventional one, modified with 4,5% of SBS and modified with 20% of recycled tire rubber. Two aggregate gradations were tested, center of B and C gradations of DNER (1997). Four binder contents were
Publicado em: 2004
-
27. Análise comparativa de pavimentos dimensionados através dos métodos empírico do DNER e mecanístico e proposta de um catálogo simplificado de pavimentos para a região de Campo Grande (MS) / Comparative analysis of pavements designed by the empirical (DNER) and mechanistic methods and proposal of a simplified catalog of pavements for the area of Campo Grande (MS)
Este estudo tem como objetivo principal comparar estruturas de pavimentos flexíveis projetadas através dos métodos empírico do DNER e mecanístico, considerando-se alguns materiais de pavimentação utilizados na região de Campo Grande, estado do Mato Grosso do Sul. Como objetivos decorrentes, pode-se destacar a obtenção das características resilient
Publicado em: 2004
-
28. Avaliação do reaproveitamento de areia de fundição como agregado em misturas asfálticas densas / Evaluation of the reusing of waste foundry sand as an aggregate in dense asphalt
Foundry sand is an industrial solid waste resulting from sand casting process in foundry industries. Depending on the type of foundry process (green sand molding, shell sand molding, molding using synthetic resin and others) and of the type cast metal, this waste may contain elements and/or chemical compounds that may cause environmental impact. The substanc
Publicado em: 2004
-
29. Estudo do comportamento resiliente de três solos da região de Campo Grande-MS e de relações entre o módulo de resiliência e resultados de ensaios de compressão simples / Study of the resilient behavior of three soils from Campo Grande-MS and analysis of relations among resilient modulus and results of compressive strenght tests
The resilient modulus knowledge (MR) is fundamental for pavement design, once it is necessary for stresses, strains and deflections calculus in its layers and subgrade, as well as, the analysis of system performance. Although field tests may be used to determine the dynamic behavior of soils, most of researchers favor laboratory tests, based on the fact that
Publicado em: 2003
-
30. Influence of drainage system efficiency in the asphalt pavement performance. / Influência da drenagem subsuperficial no desempenho de pavimentos asfálticos.
Since the implementation of the first roads, there are indications that constructors already had knowledge concerning drainage influence in the pavement performance. Many countries, where highway administration costs are criteriously available along pavement lifetime, have been developing researches regarding considerations about harmful effects from excessi
Publicado em: 2003
-
31. Módulo de resiliência de misturas solo-alcatrão, solo-cal- alcatrão e solo-cimento-alcatrão para pavimentação de estradas florestais / Resilient modulus of soil-tar, soil-lime-tar and soil-cement-tar mixtures for forest road pavement applications
Este trabalho teve por objetivo estudar o comportamento resiliente de dois solos, respectivamente de comportamento laterítico e saprolítico, da região de Viçosa, estado de Minas Gerais, Brasil, e de suas misturas com alcatrão, cal e cimento. Correlações estatísticas foram desenvolvidas entre o módulo resiliente dos solos e misturas com parâmetros g
Publicado em: 2002