Residual Monomer
Mostrando 1-12 de 29 artigos, teses e dissertações.
-
1. Evaluation of the physical and antifungal effects of chlorhexidine diacetate incorporated into polymethyl methacrylate
Abstract This study aimed to evaluate the physical properties and antifungal activities of polymethyl methacrylate (PMMA) acrylic resins after the incorporation of chlorhexidine diacetate salt (CDA). Methodology: First, acrylic resin specimens were fabricated with Vipi Cor® and DuraLay® resins with and without the incorporation of 0.5%, 1.0% or 2.0% CDA.
J. Appl. Oral Sci.. Publicado em: 10/01/2020
-
2. Pulp Fibroblast Cell Apoptosis After Application of Hema Dentine Bonding Material with Ethanol and Water Solvent
Resumo Os principais materiais para adesão dentinária em restaurações de resina composta são o 2-hidroxietil metacrilato (HEMA). O HEMA possui propriedades físicas e químicas benéficas e estáveis, ainda que tóxicas. A adição de etanol ou água pode reduzir o efeito tóxico do HEMA. O solvente etanol possui uma menor capacidade de ligação H em c
Braz. Dent. J.. Publicado em: 03/06/2019
-
3. Synthesis and characterization of novel polyester containing Schiff-base unit
Abstract A new Schiff base type of polyester containing 2,2-dimethyl-1,3-diaminopropane was prepared by solution polycondensation of 1,4-benzenedicarbonyl dichloride with Bis(4-hydroxybenzilaldehid)-2,2-dimethyl-1,3-propildiimine (H2HB2P) which is derived from a 2,2-dimethyl-1,3-diaminopropane Schiff base reacted with a 4-hydroxybenzaldehyde monomer. The mon
Polímeros. Publicado em: 2015-10
-
4. Synthesis and Characterization of Poly(Acrylamide-Co-Acrylic Acid) Flocculant Obtained by Electron Beam Irradiation
AbstractThe goal of the paper was to prepare a class of flocculants by free-radical copolymerization of acrylamide with acrylic acid in aqueous solutions in the presence/absence of potassium persulphate as initiator. Reaction medium was submitted to electron beam treatment of 0.6 to 1.5 kGy in atmospheric conditions and at room temperature. Because of the co
Mat. Res.. Publicado em: 2015-10
-
5. Efecto de surfactantes polimerizables en la distribución de tamaño de partícula, pH, viscosidad, contenidos de sólidos y de monómero residual de una resina estireno-butilacrilato
Results on the emulsion polymerization of a styrenated acrylic resin using polymerizable surfactants are presented. These surfactants exhibit low foaming, high film strength upon contact with water and good stability in the polymerization. A comparison was made with results for conventional non-polymerizable alkyl aryl polyglycol ether sulphate, sodium salt
Polímeros. Publicado em: 18/06/2013
-
6. Influence of plaster drying on the amount of residual monomer in heat-cured acrylic resins
AIM: To evaluate the influence of plaster condition, dry or not, on the amount of residual monomer in heat-cured acrylic resin. METHODS: Thirty acrylic resin specimens (65x10x3 mm) were fabricated and randomly assigned to 5 groups (n=6). The evaluated resins were heat-cured acrylic resins by conventional or microwave polymerization techniques and the plaster
Braz. J. Oral Sci.. Publicado em: 2013-06
-
7. Avaliação do grau de conversão monomérica, parâmetros de cinética de polimerização e determinação de monômeros residuais em resinas experimentais / Evaluation of degree of monomer conversion, the polymerization kinetic parameters and determination of residual monomers in experimental resins
Este estudo teve como objetivo investigar múltiplos aspectos relacionados a polimerização da resina composta como: o grau de conversão monomérica (GC), parâmetros da cinética de polimerização e a determinação de monômeros residuais TEGDMA e BisGMA, além de avaliar o desempenho de aparelhos fotoativadores. As resinas compostas experimentais foram
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/07/2012
-
8. Analysis by confocal laser scanning microscopy of the MDPB bactericidal effect on S. mutans biofilm CLSM analysis of MDPB bactericidal effect on biofilm
Since bacteria remain in the dentin following caries removal, restorative materials with antibacterial properties are desirable to help maintaining the residual microorganisms inactive. The adhesive system Clearfil Protect Bond (PB) contains the antibacterial monomer 12-methacryloyloxydodecylpyridinium bromide (MDPB) in its primer, which has shown antimicrob
J. Appl. Oral Sci.. Publicado em: 2012-10
-
9. Nanocomposites of polyamide 6/residual monomer with organic-modified montmorillonite and their nanofibers produced by electrospinning
Nanocomposites of an organic-modified montmorillonite (MMT) and polyamide 6 (PA6) with a residual monomer were produced by melt mixing in a torque rheometer. By wide angle X-rays diffraction (WAXD), intercalated/exfoliated structures were observed in the PA6/MMT nanocomposites with 3 and 5 wt. (%) of MMT; on the other hand, when 7 wt. (%) of MMT was added, a
Materials Research. Publicado em: 07/08/2012
-
10. Efeito fotoiniciador sobre propriedades físicas, mecânicas e térmicas de compósitos experimentais fotoativados por luz de lâmpada halógena e LEDs / Effect of the photo-initiator on physical, mechanics and thermal properties of experimental composites photo-activated for halogen lamp and LEDs
The aim of this study was to analyze the spectrum of different lightcuring units (LCUs) and photo-initiators and yours influence in the physical and thermal properties and bond strength (BS) of experimental resin composites with different photo-initiators. A blend with BisGMA, UDMA, BisEMA, TEGDMA and 65 wt% of silanated filler particles was prepared with CQ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2010
-
11. Evaluation of residual monomer, water sorption and porosity by acrylic resins used to eye prostheses / Avaliação da liberação de monômero residual, absorção de água e porosidade superficial em resinas acrílicas para prótese ocular
This comparative evaluation of porosity, water sorption and residual monomer presented by acrylic resins was conducted, looking for excellence and rapidity in the confection of eye prostheses. Four groups, comprising of 15 specimens each, were established and submitted to polymerization cycles: Group 1 - conventional heat polymerizing acrylic resin / convent
Publicado em: 2008
-
12. Simulação numérica da migração de elementos metálicos e do monômero -caprolactama de embalagens poliméricas irradiadas para simulantes de alimentos / SIMULATION STUDY OF -CAPROLACTAM MONOMER AND METALLIC ELEMENTS MIGRATION FROM IRRADIATED POLYMERIC PACKAGING INTO FOOD SIMULANTS
For decades migration study of chemical compounds from packaging into food, such as metals, residual monomers and additives, is a very important issue, concerning public health and minimize chemical contamination. In this work, it was done irradiations of packagings taken in contact with food simulant, and it was studied this migration through a mathematical
Publicado em: 2008