Residual Generation
Mostrando 1-12 de 102 artigos, teses e dissertações.
-
1. High Residual Gradient Following a Self-Expandable Transcatheter Aortic Valve-in-Valve Implantation — Risk Factor Analysis, Outcomes, and Survival
Abstract Introduction: Transcatheter aortic valve-in-valve implantation (TAVI-ViV) can be associated with unfavorable hemodynamic outcomes. This study aimed to estimate the prevalence, identify the risk factors, and evaluate the outcomes and survival of patients with high residual gradients after TAVI-ViV. Methods: A total of 85 patients were included in t
Brazilian Journal of Cardiovascular Surgery. Publicado em: 2022
-
2. An alternative energy generation from charcoal produced from Brazilian pine (Araucaria angustifolia (Bert.) O. Ktze) seed residues
The perspective is that the energy demand will grow in the coming decades worldwide. The search for renewable energy sources is urgent and necessary. Residual biomass may be a promising source of raw material for obtaining bioenergy. Thus, this research sought to evaluate the energetic and physicochemical properties of residues from the seeds of Brazilian pi
Química Nova. Publicado em: 2022
-
3. Does mpMRI guidance improve HIFU partial gland ablation compared to conventional ultrasound guidance? Early functional outcomes and complications from a single center
ABSTRACT Background Focal therapy (FT) for localized prostate cancer (PCa) treatment is raising interest. New technological mpMRI-US guided FT devices have never been compared with the previous generation of ultrasound-only guided devices. Materials and Methods We retrospectively analyzed prospectively recorded data of men undergoing FT for localized low
Int. braz j urol.. Publicado em: 2020-12
-
4. Análise da redução da alcalinidade de compósitos cimento-madeira em função da substituição parcial do cimento Portland por pozolanas
RESUMO O objetivo desta pesquisa foi avaliar a redução da alcalinidade de compósitos cimento-madeira, produzido com cimento Portland e partículas residuais de Pinus spp., em função da substituição gradual do cimento Portland pelas pozolanas sílica ativa (SA) metacaulim (MK), cinza volante (CV), escória de alto-forno (EAF), cinza de casca de arroz (
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. THERMAL BEHAVIOR OF FOREST BIOMASS WASTES PRODUCED DURING COMBUSTION IN A BOILER SYSTEM
RESUMO Durante a queima da biomassa em sistemas industriais haverá a formação de resíduos contendo cinzas e carbono residual, cujo teor será variável em função da eficiência e dos parâmetros de operação das câmaras de combustão. A caracterização destes resíduos é ferramenta essencial para visualizar a sua potencialidade de reuso energético
Rev. Árvore. Publicado em: 23/09/2019
-
6. Corrosion Behavior of 316L and Alloy 182 Dissimilar Weld Joint with Post-Weld Heat Treatment
ABSTRACT Austenitic stainless steel and nickel-base alloys welds are widely used in nuclear reactor components, plants of energy generation, chemical, and petrochemical industries, due to their high corrosion resistance. The post weld heat treatments (PWHT) are generally applied to welding in order to relieve the welding residual stress. The aim of this work
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Increased whitening efficacy and reduced cytotoxicity are achieved by the chemical activation of a highly concentrated hydrogen peroxide bleaching gel
Abstract Objective This study was designed for the chemical activation of a 35% hydrogen peroxide (H2O2) bleaching gel to increase its whitening effectiveness and reduce its toxicity. Methodology First, the bleaching gel - associated or not with ferrous sulfate (FS), manganese chloride (MC), peroxidase (PR), or catalase (CT) - was applied (3x 15 min) to
J. Appl. Oral Sci.. Publicado em: 12/08/2019
-
8. Characterization of bamboo species and other biomasses with potential for thermal energy generation>
RESUMO A qualidade da biomassa é importante para fortalecer o uso de espécies como fontes energéticas confiáveis. Objetivou-se caracterizar os atributos de qualidade energética da biomassa de espécies de bambu (Bambusa vulgaris, Bambusa tuldoides, Dendrocalamus giganteus e Guadua angustifolia), em comparação a outros tipos de matérias-primas de orig
Pesqui. Agropecu. Trop.. Publicado em: 18/07/2019
-
9. Multi-criteria Selection of Distributed Mini Generation Systems Using Rice Husk
ABSTRACT This paper presents a multi-criteria methodology to support decision making for management and selection of distributed mini generation sources (GD) using rice husk. Considering the potential of residual biomass, the developed model is based on the Analytic Hierarchy Process (AHP) method to evaluate the main technological arrangements of generation
Braz. arch. biol. technol.. Publicado em: 22/10/2018
-
10. Surface Integrity Analisys in the Hard Turning of Cemented Steel AISI 4317
This work was based on the surface integrity analysis of hardened steel, AISI 4317 case carburized, quenched and tempered with 58 HRC, obtained by a turning operation executed with CBN (cubic boron nitride) tool, varying three basic cutting parameters (cutting speed, feed rate and cutting depth). The surface integrity characterization was conducted analyzing
Mat. Res.. Publicado em: 26/07/2018
-
11. Interactive effects of genotype x environment on the live weight of GIFT Nile tilapias
ABSTRACT In this paper, the existence of a genotype x environment interaction for the average daily weight in GIFT Nile tilapia (Oreochromis niloticus) in different regions in the state of Paraná (Brazil) was analyzed. The heritability results were high in the uni-characteristic analysis: 0.71, 0.72 and 0.67 for the cities of Palotina (PL), Floriano (FL) an
An. Acad. Bras. Ciênc.. Publicado em: 11/12/2017
-
12. Microstructure and Residual Stresses in a Friction Stir Welded Butt Joint of as-cast ZK60 Alloy Containing Rare Earths
The effect of a travel speed of 200 mm/min as well as a tool rotational speed of 1200 rpm on butt joint quality of friction stir welding (FSW) ZK60 magnesium casting alloy containing 1.5 wt.% rare earths (ZK60-1.5RE) was investigated to determine microstructure and residual stresses. FSW results in the generation of heterogeneous metallurgical structures con
Mat. Res.. Publicado em: 27/04/2017