Reservoirs Simulation
Mostrando 1-12 de 76 artigos, teses e dissertações.
-
1. Puls method for events simulation in a lot scale bioretention device
RESUMO Biorretenção é uma técnica aplicada para tratar e reduzir o escoamento superficial gerado em áreas urbanas. Embora essas instalações apresentem processos complexos, um modelo simples com poucos parâmetros pode ser útil para seu projeto. Este artigo relata uma aplicação do método Puls como uma ferramenta quantitativa de simulação de biorr
RBRH. Publicado em: 22/08/2019
-
2. TOWARD PREDICTIVE MODELS FOR ESTIMATION OF BUBBLE-POINT PRESSURE AND FORMATION VOLUME FACTOR OF CRUDE OIL USING AN INTELLIGENT APPROACH
Abstract Accurate estimation of reservoirs fluid properties, as vital tools of reservoir behavior simulation and reservoir economic investigations, seems to be necessary. In this study, two important properties of crude oil, bubble point pressure (Pb) and formation volume factor (Bob), were modelled on the basis of a number of basic oil properties: temperatu
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
3. 3D COMPOSITIONAL RESERVOIR SIMULATION IN CONJUNCTION WITH UNSTRUCTURED GRIDS
Abstract In the last decade, unstructured grids have been a very important step in the development of petroleum reservoir simulators. In fact, the so-called third generation simulators are based on Perpendicular Bisection (PEBI) unstructured grids. Nevertheless, the use of PEBI grids is not very general when full anisotropic reservoirs are modeled. Another p
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
4. EFFECT OF NON-DARCY FLOW COEFFICIENT VARIATION DUE TO WATER VAPORIZATION ON WELL PRODUCTIVITY OF GAS CONDENSATE RESERVOIRS
Abstract Well productivity of gas condensate reservoirs is highly affected by near-wellbore phenomena. Inertial force resulting from convective acceleration of fluid particles in the medium, as well as viscous force, determines the flow of gas through porous media at high velocity. Pressure drop builds up the molar content of water in gas by water vaporizati
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
5. AN EOS-BASED NUMERICAL SIMULATION OF THERMAL RECOVERY PROCESS USING UNSTRUCTURED MESHES
Abstract In the past thirty years, the development of compositional reservoir simulators using an equation of state (EOS) has been addressed in the literature. However, the development of compositional thermal simulators in conjunction with the EOS formulation, in particular, has not been addressed extensively. In this work, a fully implicit, thermal, compos
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
6. Comparison of an impec and a semi-implicit formulation for compositional reservoir simulation
In compositional reservoir simulation, a set of non-linear partial differential equations must be solved. In this work, two numerical formulations are compared. The first formulation is based on an implicit pressure and explicit composition (IMPEC) procedure, and the second formulation uses an implicit pressure and implicit saturation (IMPSAT). The main goal
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
7. Modelagem matemática e simulação numérica do transporte de metano em reservatórios de hidrelétricas / Mathematical modeling and numerical simulation of the methane transport in hydroelectric reservoirs
É notório que a degradação ambiental vem ao longo do tempo posicionando-se como um dos principais problemas do mundo moderno. Dentre as várias questões do interesse ambiental podemos destacar a ascensão da bolha de metano, em reservatórios hidrelétricos, desde o sedimento anóxico no fundo do reservatório até a interface água atmosfera. Neste con
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/09/2012
-
8. Simulation of multiple reservoirs sharing constrained surface facilities using integrated production modelling / Simulação de múltiplos reservatórios em cenário com restrição de superfície utilizando modelagem integrada de produção
The selection of production strategies for petroleum field development is an important task. The specific case in which there are constrained surface facilities, the allocation of production and injection well rates is one more item to be optimized. When the problem involves several segregated reservoir units, each of which characterized by its own geologica
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/05/2012
-
9. Avaliação do acoplamento explícito entre simulação de reservatório e sistema de produção / Evaluation of explicit coupling between reservoir simulator and production facilities system
Various methodologies to model the coupling of reservoirs and production systems have been applied in the oil industry in recent years due to the need to model properly the integrated solution of models that represent the flow of fluids through the reservoir to the surface. These methodologies are used to forecast production of multiple reservoirs, sharing p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/05/2012
-
10. Simulação da recuperação de petróleo em reservatórios naturalmente fraturados / Simulation of petroleum recovery in naturally fractured reservoirs
A recuperação de petróleo em reservatórios naturalmente fraturados apresenta-se como um risco de projeto, sobretudo em sistemas molháveis ao óleo ou com molhabilidade intermediária, já que a simulação utilizando deslocamento por injeção de água indica significativa redução da recuperação. As fraturas representam descontinuidades do meio poro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/03/2012
-
11. Aproveitamento de água de chuva no meio urbano e seu efeito na drenagem pluvial
There is an increasing interest from the society in rainwater harvesting and use in urban areas, due to the benefits that this practice provides, such as: economic, environmental and urban flooding control. This interest may be perceived by the emergence of government regulations and increased availability of specific products in the domestic market for the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
12. Integração de análise de incertezas e ajuste de histórico : aplicação em um caso complexo / Integration of uncertainty analysis with history matching : application in a complex case
A grande quantidade de incertezas presente na modelagem de reservatórios gera riscos na previsão de comportamento de um campo de petróleo. Assim, torna-se imprescindível o ajuste de histórico, que é a calibração do modelo de simulação do reservatório com os dados dinâmicos observados, aproximando o modelo da realidade e gerando previsões mais co
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/10/2011