Reinforced Materials
Mostrando 13-24 de 208 artigos, teses e dissertações.
-
13. Investigación de diseños de mezcla para producir Ultra High Performance Fiber Reinforced Concrete (UHPFRC) usando ANOVA
ABSTRACT An experimental study is presented to produce Ultra High Performance Fiber Reinforced Concrete (UHPFRC) including industrial waste in the mix, and determine the average compressive strength. The study includes factor arrangements to perform analysis of variance using ANOVA. The controllable factors were: (i) age of the sample; (ii) granulometry of t
Matéria (Rio J.). Publicado em: 10/06/2019
-
14. Presence of iron in polymers extruded with corrosive contaminants or abrasive fillers
Abstract Off-site measurements of the dimensions of extruder screws are used to monitor their wear. This wear causes the presence of metals in the processed polymer. We detected the presence of iron in polymers processed with corrosive contaminants or abrasive fillers. To this end we processed poly(ethylene terephthalate), PET, pure or contaminated with poly
Polímeros. Publicado em: 10/06/2019
-
15. Study of epoxy composites and sisal fibers as reinforcement of reinforced concrete structure
Resumo A aplicação de reforço estrutural tem apresentado crescimento significativo nos dias atuais. O desenvolvimento de novos materiais para tal finalidade tem despertado o interesse de muitos pesquisadores. O presente trabalho teve por objetivo avaliar a viabilidade técnica da produção e aplicação de polímeros reforçados com fibras vegetais (PRFV
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
16. THE MULTIROLE OF MODIFIED NATURAL GUMS FOR MULTICOMPONENT POLYMERS: AS COUPLING AGENTS FOR POLYMERS REINFORCED WITH CELLULOSIC FIBERS OR COMPATIBILIZERS FOR BIODEGRADABLE POLYMER BLENDS
In this work, the capability to use pine rosin as a biodegradable coupling agent/compatibilizer is studied. To formulate composites, post-consumer polypropylene and discarded agave fibers (as reinforcing agent) are coupled with pine rosin (in pure or maleated form). Besides, poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) are comp
Quím. Nova. Publicado em: 02/05/2019
-
17. Analysis of Failure Criteria in Laminas Reinforced with Unidirectional Curaua Fiber Fabric
Natural fibers are increasingly used as composite reinforcement in different fields of engineering. Caraua fiber stands out for its good mechanical properties and adherence to resin; however, little is known about its behavior in the manufacture of a composite or whether classic failure theory applies in this case. The present study assesses the mechanical p
Mat. Res.. Publicado em: 25/04/2019
-
18. Failure Theories on Carbon/Kevlar Hybrid Fabric Based Composite Laminate: Notch and Anisotropy Effects
Composite materials have been increasingly used in both researches and industries, given their wide range of innovative applications and configurations. High-performance hybrid fabric-reinforced plastics stand out in this sector. In the present research, an epoxy-based vinyl ester resin laminate reinforced with bidirectional hybrid fabric consisting of carbo
Mat. Res.. Publicado em: 25/04/2019
-
19. Two-Dimensional Numerical Model of the Fracture Process in Steel Fibre Reinforced Concrete with the Continuum Strong Discontinuity Approach and Functional Data Analysis
Abstract This paper presents the formulation of a two-dimensional numeri-cal model able to describe the fracture process in structural mem-bers of steel fibre reinforced concrete (SFRC) from the volume ratio of the fibres and the mechanical properties of the compo-nents: a concrete matrix and a set of steel fibres with a random orientation. The relationship
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
20. Brittleness index and its relationship with materials mechanical properties: Influence on the machinability of CAD/CAM materials
Abstract: The aim of this study is to evaluate the machinability of four CAD/CAM materials (n = 13) assessed by brittleness index, Vickers hardness, and fracture toughness and interaction among such mechanical properties. The materials selected in this in vitro study are Feldspathic ceramic [FC], Lithium-disilicate glass ceramic [LD], leucite-reinforced glas
Braz. oral res.. Publicado em: 04/04/2019
-
21. Cálculo Mental e Ensino de Aritmética em Escolas da Cidade do Rio de Janeiro no Final do Século XIX
Resumo O cálculo mental vem sendo considerado um recurso didático valorizado no Brasil, mais especialmente a partir de 1990, com a publicação de documentos que reforçaram sua importância para o ensino da Matemática na Escola Básica. Entretanto, sugestões para sua utilização já estavam presentes em recomendações curriculares para a escola primá
Bolema. Publicado em: 2019-04
-
22. Evaluation of reinforced concrete structural durability in the post-occupation phase - A case study in Novo Hamburgo/RS
Abstract Researches on building performance have been developed over time. The Brazilian Performance Standard - NBR 15575 - deals with the issues of durability applied to residential buildings, establishing criteria and parameters to classify the systems into minimum, intermediate and higher performance levels. In relation to the service life, studies are al
REM, Int. Eng. J.. Publicado em: 2019-03
-
23. Alternative vibro-dynamic compression processing of wood-cement composites using Amazonian wood
RESUMO Compósito madeira-cimento é um potencial material de construção para regiões tropicais, devido a suas propriedades físico-mecânicas e resistência ao ataque de fungos e podridão. Contudo, é importante testar métodos alternativos de produção e madeiras que sejam mais simples e baratos do que os tradicionalmente usados, para que se alcance u
Acta Amaz.. Publicado em: 2019-03
-
24. Mechanical Properties and Abrasive Wear of Different Weight Percentage of TiC Filled Basalt Fabric Reinforced Epoxy Composites
Fiber reinforced polymers are very rarely applied as wear-resistant materials because of the lack of good mechanical strength, which adversely affects the properties of the composites. To improve the mechanical and abrasive wear resistant of the composites, fillers are incorporated into the polymers. Hence in this work composites are produced by adding funct
Mat. Res.. Publicado em: 14/01/2019