Reflection Coefficient
Mostrando 1-12 de 72 artigos, teses e dissertações.
-
1. Design and Simulation of Broadband Horn Nanoantennas for Nanophotonic Applications
Abstract Optical plasmonic nanoantennas have proven useful in nanoplasmonic applications, paving the way for more efficient wireless optical communications. In this work, we propose a parametric study of a plasmonic horn nanoantenna in flat H sectorial format and beveled horn, both designed to radiate in the three wavelengths of optical communications: [850
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. A Compact Dual-Band Self-Diplexing MIMO Patch Antenna for ISM and X-Band Communications
Abstract A compact, dual-band, and self-diplexing MIMO patch antenna with a shared aperture is presented for Industrial scientific medical (ISM) band and X-band communications. The structure consists of two orthogonal feed lines and a rectangular slot in a square patch. The size of the FR4 substrate is 50 × 50 × 1.6 mm3. The designed structure operates at
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Quick Identification of the Time of Maturation of Artisanal Minas Cheese by FTIR-ATR Spectroscopy and Multivariate Techniques
The objective of this work is the identification of cheese maturation time using attenuated total reflection Fourier transform spectroscopy (FTIR-ATR) data and analytical measurements associated with chemometrics techniques. Minas artisanal cheeses were collected from 8 producers matured at times 1, 7, 14, 21, 28, 45 and 60 days, fractioned in rind and crumb
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
4. Dielectric and Magnetic Properties of Epoxy with Dispersed Iron Phosphate Glass Particles by Microwave Measurement
Abstract This paper investigates the dielectric properties and magnetic properties of epoxy composites with different amount of powdered iron phosphate glass (IPG) at 8.2 GHz to 12.4 GHz using microwave technique. IPG composed of 60P2O5-40Fe2O3 (mol%) was produced by conventional melt and quenching method and crushed into powder. The IPG powder was character
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
5. Higher Order Mode Attenuation in Microstrip Patch Antenna with DGS H Filter Specification from 5 to 10 GHz Range
Abstract This work proposes the application of a slot in the ground plane, Defected Ground Structure (DGS), of a microstrip patch antenna. The application of this technique aims to attenuate higher-order excited modes without deteriorating the antenna parameters in the fundamental mode. The methodology for the design of the slot in H-format is presented, bas
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
6. Co-Design of a GPS Antenna Low-Noise Amplifier Front-End Circuit
Abstract This paper presents a clear and fast design procedure for directly matched low noise active integrated microstrip antenna front end circuits. Initially, a theoretical analysis is given for the overall gain equivalence between traditional and directly matched antennas. Then, a detailed procedure is presented for the design and construction of a fully
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 11/11/2019
-
7. Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques
Abstract In this study are analyzed horn antennas to operating at X band (8 – 12 GHz) and manufactured by additive manufacturing method (AM). To construct the antennas using AM method was necessary made the structure with acrylonitrile butadiene styrene (ABS) thermoplastic using a 3D printer, and then coated the antennas with conductive surfaces. Were fabr
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
8. A New Technique Using Axially Slotted Microstrip Line for Antenna Impedance Matching Designs
Abstract A new technique is presented for designing microstrip patch antennas with very good input impedance matching. The analysis is carried out for 1.78 GHz, 2.42 GHz and 3.46 GHz rectangular patch antennas printed on low-cost fiberglass substrates (FR-4), mounted on a ground plane and fed by a microstrip line. The antenna impedance matching is obtained u
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
9. Clinical and functional variables can predict general fatigue in patients with acromegaly: an explanatory model approach
ABSTRACT Objective To evaluate whether hormonal profile, arterial function, and physical capacity are predictors of fatigue in patients with acromegaly. Subjects and methods: This is a cross-sectional study including 23 patients. The subjects underwent a Modified Fatigue Impact Scale (MFIS) assessment; serum growth hormones (GH) and IGF-1 measurements; pul
Arch. Endocrinol. Metab.. Publicado em: 25/04/2019
-
10. Use of FTIR-ATR Spectroscopy Combined with Multivariate Analysis as a Screening Tool to Identify Adulterants in Raw Milk
The objective of this study was to use Fourier transform infrared (FTIR) spectroscopy combined with multivariate analysis to identify adulterations in raw milk and in samples from producers. Five levels of concentration of sodium bicarbonate, sodium hydroxide, hydrogen peroxide, starch, sucrose and urea were used. A total of 620 samples previously adulterate
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
11. Quantification of Aerospace Polymer Blends by Thermogravimetric Analysis and Infrared Spectrometry
ABSTRACT Ethylene-propylene-diene elastomer (EPDM) is employed as thermal insulation for rocket motors, as well as EPDM blends with ethylene vinyl acetate (EVA) have been used in the aerospace industry. The quantification of these blends is more common using Fourier Transform Infrared Spectrometry (FT-IR) by transmission mode, but without discussing sample p
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
12. Design of Microwave Absorbers using Improvised Particle Swarm Optimization Algorithm
Abstract Particle Swarm Optimization (PSO) algorithm has been applied in electromagnetics to design microwave absorbers. Generally, microwave absorbers are used for absorbing the electromagnetic radiation caused due to numerous electronic equipments and is being extensively used in stealth technology. The main aim of this paper is to find and analyze the min
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06