Refinement
Mostrando 1-12 de 693 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
3. Aortic Valve Reconstruction with Ozaki Technique
Abstract Modern bioprostheses offer a complete and definitive solution to elderly patients who need aortic valve surgery. Nonetheless, the scenario is more demanding when dealing with younger and less fragile patients. In this setting, any prosthetic aortic valve replacement can provide only a suboptimal solution and its related issues have not been fixed ye
Brazilian Journal of Cardiovascular Surgery. Publicado em: 2022
-
4. Synthesis and characterization of α-SnWO4 powders obtained by microwave-assisted hydrothermal method
Abstract The structural, morphological, and optical properties of α-SnWO4 synthesized by microwave-assisted hydrothermal method at 150 °C for different times were investigated. XRD revealed the formation of the orthorhombic phase, without the presence of a secondary phase. The sample processed for 64 min showed a reduction in unit cell volume, suggesting a
Cerâmica. Publicado em: 2022
-
5. REFINEMENT OF SALIVA MI-RNA BIOMARKERS FOR SPORT-RELATED CONCUSSION
RESUMO Introdução: As alterações da estrutura cerebral provocadas por uma concussão relacionada ao esporte podem ser inicialmente indistinguíveis, porém os efeitos deletérios irreversíveis são notados a longo prazo. Um diagnóstico precoce poderá fornecer ao paciente uma chance maior de recuperação e aumento de sobrevida. Para tanto, estuda-se
Revista Brasileira de Medicina do Esporte. Publicado em: 2022
-
6. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
7. The Anaortic Technique with Bilateral Internal Thoracic Artery Grafting - Filling the Gap in Coronary Artery Bypass Surgery
Abstract Coronary artery bypass grafting (CABG) has consolidated its role as the most effective procedure for treating patients with advanced atherosclerotic coronary artery disease, reducing the long-term risk of myocardial infarction and death compared to other therapies and relieving angina. Despite the recognized benefits afforded by surgical myocardial
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
8. QUANTIFICAÇÃO DE MULLITA PROVENIENTE DE RESÍDUOS DE CAULIM DA REGIÃO AMAZÔNICA: USO DO MÉTODO DE RIETVELD
Mullite is used to obtain a refractory material, there are several factors that influence the synthesis process of mullite: the preparation of the mixture, the precipitation and the reaction of SiO2 and Al2O3. For the synthesis of mullite, samples of kaolin processing residues were used as precursor material, because it presents SiO2 and Al2O3 in its composi
Quím. Nova. Publicado em: 2021-04
-
9. Perovskite-Type Oxides La0.6M0.4Ni0.6Cu0.4O3 (M = Ag, Ba, Ce) towards the Oxygen Reduction Reaction (ORR) in Alkaline Medium: Structural Aspects and Electrocatalytic Activity
In this work, La0.6M0.4Ni0.6Cu0.4O3 (M = Ag, Ba, and Ce, denoted as LANC, LBNC, and LCNC, respectively) electrocatalysts were synthesized by the Pechini method at 1023 K for two hours in air. Rietveld refinement allowed the identification of the crystallographic phases present in all oxides. The electrocatalytic performance of these oxides towards the oxygen
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
10. Reusable Heterogeneous SnO2/ZnO Catalyst for Biodiesel Production from Acidified/Acid Oils
A catalyst comprised of SnO2 impregnated on ZnO nanowires, which presented remarkable ability to catalyze fatty acid esterification/transesterification reactions, is reported. For optimization of reaction conditions, artificially acidified soybean oil with 10 wt.% oleic acid was used as a model feed. The optimized conditions were: 150 °C, 6 h, 5 g of oil, c
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
11. Crystallographic Changes Accompanying the Verwey Transition in a Magnetite from Steatite
The crystallographic structural analysis of the magnetite of a steatite rock at 298 K, (saturation magnetization, σ = 95.0 J T-1 kg-1) showed two cubic networks and, below Verwey temperature (TV ca.120 K) a monoclinic structure, basing on their cell dimensions and different transitional behaviors when reducing the temperature. A monoclinic structure was ide
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
12. GPU Finite Element Method Computation Strategy Without Mesh Coloring
Abstract A GPU-adapted Finite Element Method (A-FEM) implementation without using a mesh coloring strategy to avoid race conditions is presented. All the elements are simultaneously processed, and the local data is computed and consolidated into the device memory in a new adapted Coordinate Format data structure (a-COO). The comparison between the proposed s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06