Recycled Glass
Mostrando 1-11 de 11 artigos, teses e dissertações.
-
1. Glass-ceramic produced with recycled glass
ABSTRACT The objective of this work is the production and characterization of glass-ceramic with recycled glass powder and 4% (w/w) of cerium dioxide. Eleven groups were defined with conformation pressure of 11.6 and 25.8 MPa, and cerium dioxide addition. The sintering temperatures of 650, 675, 700 and 750 °C were used. The raw material was formed into a mo
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Avaliação da energia incorporada e da emissão de CO2 em recipientes para refrigerantes: PET versus vidro
RESUMO Este artigo busca avaliar e comparar qual material (PET ou vidro) proporciona um ciclo de vida mais sustentável para os recipientes utilizados no envase de refrigerantes. Foram comparados quatro recipientes de vidro - três retornáveis e um descartável - com cinco recipientes em polietileno tereftalato (PET) - três descartáveis produzidos com mat
Eng. Sanit. Ambient.. Publicado em: 25/11/2019
-
3. Desenvolvimento de espumas vítreas a partir de garrafa e casca de ovo
RESUMO Este trabalho tem como foco a produção de espumas vítreas a partir de materiais reciclados, fazendo uso de matéria-prima de fácil acesso local e alta incidência no mercado: garrafas de cerveja não retornáveis e casca de ovo, como agente espumante. Para tanto, investigou-se a influência da temperatura de queima, da granulometria do vidro precu
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Compatibilization of recycled polypropylene and recycled poly (ethylene terephthalate) blends with SEBS-g-MA
Abstract The compatibilization of recycled PP/PET blend with high and low concentration (20 and 5 phr) of elastomer functionalized by maleic anhydride (SEBS-g-MA) was achieved. Recycled polypropylene from plastic industry and recycled PET from post-consumer bottles was used. PP/PET blends: 80:20 w/w, 50:50 w/w and 20:80 w/w were prepared in an internal mixe
Polímeros. Publicado em: 15/03/2018
-
5. Characterization of Vitrocrystalline Foams Produced from Discarded Glasses and Recycled Polystyrene Spheres
In this work, discarded soda-lime glasses (from glass bottles) and recycled polystyrene (PS) spheres (d50 < 300 µm) were successfully converted into vitrocrystalline foams for thermal insulation applications. Physical and chemical properties of the selected and prepared raw materials (wastes) were characterized. Batches containing well mixed glass powder (d
Mat. Res.. Publicado em: 23/10/2017
-
6. SÍNTESE E CARACTERIZAÇÃO DE ESPUMAS VÍTREAS CONTENDO TiO2 E UTILIZANDO HIDRÓXIDO DE SÓDIO COMO AGENTE ESPUMANTE
Neste trabalho foi realizado um estudo sobre a ação do hidróxido de sódio como agente formador de espuma vítrea usando resíduos de vidro em sua composição. Para a síntese, investigou-se a variação da temperatura, da taxa de aquecimento e do tempo de sinterização. Utilizando-se a técnica de porosimetria de mercúrio, para estimar a densidade e o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/04/2012
-
7. Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.
A crescente preocupação com a gestão de resíduos sólidos, observada na última década, em virtude de sua enorme quantidade e impacto ambiental, tem motivado a busca por processos de reciclagem, onde estes resíduos podem ser reprocessados de modo a gerarem novos produtos, ampliando o ciclo dos materiais e energia neles contidos. Dentre os resíduos pol
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
8. Editorial
Numerous silicates based wastes have been produced and considered for recycling and reuse. Among them, glass cullet is one of the most common silicate wastes and has considerable volume in the cities wastes. A big amount of this waste is recycled by the glass industry but another part is dumped in the cities garbage deposits. In the last few decades there ha
Matéria (Rio de Janeiro). Publicado em: 2009
-
9. Reciclagem primária de ABS: propriedades mecânicas, térmicas e reológicas / Primary recycling of ABS: mechanical, thermal and rheological properties
In this study, the primary recycling of ABS Poli(acrilonitrile butadiene styrene) inside the industry was the main subject of the analyses. Many studies have been running on recycling of end life cycle of manufactured products, however a source of rejects inside the industry can be explored and be used to reduce costs and optimize expensive raw materials. Ea
Publicado em: 2009
-
10. Processamento de compósitos de poli (tereftalato de etileno) reciclado reforçado com fibras de vidro
In this work, flake and post-condensed PET composites of different glass fiber contents (0, 20, 30 and 40%) were prepared. Tow kinds of fibers were employed: one fiber having an amino silane-based surface treatment and another one having an epoxi silane-based surface treatment. The composites were extruded in a single-screw extruder with a barrier double-fli
Publicado em: 2007
-
11. Fiberglass wastes/polyester resin composites: mechanical properties and water sorption
The mechanical properties of polyester/fiberglass composites were studied. The aim of this work was to evaluate the possibility of reusing the wastes taken from spray-up processing of Paraíba state Industries as reinforcement in polyester matrix composites. Composites with 20, 30, 40, 50 and 60 wt. (%) of recycled fiberglass were prepared by compression mol
Polímeros. Publicado em: 2006-12