Reactor Control Systems
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Nova metodologia para análise de identificabilidade e estimação de parâmetros de modelos fenomenológicos
Model identification is the activity of constructing representative mathematical models of real systems. Several techniques are available for its completion, which depend on the level of information available about the studied system. In this work techniques for gray-box identification, which use both phenomenological models and experimental data, were studi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
2. Utilização de redes neurais artificiais para determinar o tempo de resposta de sensores de temperatura do tipo RTD / Time response of temperature sensors using neural networks
In a PWR nuclear power plant, the primary coolant temperature and feedwater temperature are measured using RTDs (Resistance Temperature Detectors). These RTDs typically feed the plants control and safety systems and must, therefore, be very accurate and have good dynamic performance. The response time of RTDs is characterized by a single parameter called the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/09/2010
-
3. DIGITAL SIMULATION SYSTEM OF NEUTRON PARAMETERS OF THE TRIGA IPR-R1 NUCLEAR RESEARCH REACTOR / SISTEMA DIGITAL PARA SIMULAÇÃO DOS PARÂMETROS NEUTRÔNICOS DO REATOR NUCLEAR DE PESQUISA TRIGA IPR-1
The IPR-R1 TRIGA Mark I nuclear research reactor, at the Nuclear Technology Development Center (CDTN), is a pool type reactor cooling by light water. TRIGA reactors (Training, Research, Isotope, General Atomics) were designed for research, training and radioisotope production. The International Atomic Energy Agency (IAEA) recommends the use of safety and fri
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2010
-
4. Sistema para corrosão anisotropica profunda de sensores microeletromecanicos / Anisotropic etching system for micro electrical mechanical sensor
Integrated Silicon Sensors and Microelectromechanical Systems (MEMSs) have been developing drived mainly by the micro and nanoelectronic industry s continuous growth. As a result, MEMSs have been spreading out very quickly into commercial products. In fact, MEMSs have undertaken room in automotive market where pressure sensors as well as accelerometers have
Publicado em: 2009
-
5. Subspace predictive control. / Controle preditivo com enfoque em subespaços.
Model Predictive Control (MPC) technology is widely used in chemical process industries. Subspace identification (SID) on the other hand has proven to be an efficient alternative for classical system identification methods. Based on the results from MPC and SID, it was developed in the late 90s a new control approach, called Subspace Predictive Control (SPC)
Publicado em: 2009
-
6. Determinação dos parâmetros de compensadores estáticos de reativos e estratégia para o projeto otimizado de reatores saturados
Due to the increasing demand of consumption, the electric energy systems have faced, in the current times, problems with its operation, being the voltage control one of the most relevant matters. To provide means to solve such problems, the use of static compensators has emerged, amongst others, as a classical alternative. Although the modern solutions are m
Publicado em: 2008
-
7. Early and post transition metal complexes as a single of combined components in the ethylene and isoprene polynerization
In this work is reported, in a first step, the effect of different experimental parameters and their relation with polymer properties using the homogeneous binary catalyst system composed by Ni(α-diimine)Cl2 (α-diimine = 1,4-bis(2,6-diisopropylphenyl)- acenaphthenediimine) and {TpMs*}V(Ntbu)Cl2 (TpMs* = hydridobis(3-mesitylpyrazol-1- yl)(5-mesitylpyrazol-1
Publicado em: 2007
-
8. "Wetlands construídos" de fluxo vertical com meio suporte de solo natural modificado no tratamento de esgotos domésticos / "Wetlands construídos" de fluxo vertical com meio suporte de solo natural modificado no tratamento de esgotos domésticos / Vertical flow constructed wetlands systems with substract of natural soil for domestic wastewater treatment / Vertical flow constructed wetlands systems with substract of natural soil for domestic wastewater treatment
In Brazil, the municipalities with sewerage system is 52,2% of the total (PNSB, 2000). Therefore, it is low figure and there are regional discrepancies, as the percentage of attendance at the southern and southeastern regions are higher then at the northern northeastern and middle western. The situation is even worse at the rural area, where most localities
Publicado em: 2007
-
9. SÍNTESE E CARACTERIZAÇÃO DO DISSULFETO DE FERRO (FES2) / SYNTHESIS AND CHARACTERIZATION OF IRON DISULFIDE (FES2)
Iron disulfide can be used as an alternative material in high technological systems, as an example, solar energy collectors and cathodic component in primary and secondary batteries. The present work studies the kinetics and thermodynamics of the iron disulfide synthesis in a fluidized bed reactor for temperatures varying from 400ºC to 500ºC, operating
Publicado em: 2004
-
10. Comparison of tomographic systems for X-ray and thermal neutrons
In this work, tomographic images of the same object have been taken with 25 keV X-rays and thermal neutrons (E=0.025 eV) aiming to demonstrate that thermal neutron tomography in some cases is a complementary technique to the X-ray tomography, such as in the examination of hydrogen-bearing compounds wrapped in a metallic matrix for instance. The capability of
Brazilian Journal of Physics. Publicado em: 2003-06
-
11. Modelagem simulação e controle de um reator radial empregado na isomerização de xilenos
The great commercial interest in xylenes isomerization process is due to the high aggregated value conferred to p-xylene in many industrial applications. Typical industrial adiabatic fixed-bed reactor with radial centripet flow is used in this process. During operation catalyst activity decay uccurs due carbon compounds formation and deposition, reducing rea
Publicado em: 2002
-
12. Comportamento de dois reatores em batelada seqüenciais aeróbios com diferentes idades do lodo e retorno total do lodo em excesso após desintegração com ultra-som / Behavior of two aerobic sequential batch reactors with different sludge ages and total return of excess sludge after disintegration by ultrasound
The study aims to reduce the sludge generation in aerobic systems by recirculation of the excess sludge after disintegration with a ultrasound set. Two aerobic sequential batch reactors (A and B) were utilized operating with two different sludge ages: 12 and 8 days respectively. The reactors were operated in two stages. In the first stage, called control, th
Publicado em: 2002