Ray Casting
Mostrando 13-24 de 53 artigos, teses e dissertações.
-
13. Chemical and mineralogical characterization of silicon manganese iron slag as railway ballast
Abstract In nature, metal ores such as iron, lead, aluminum and others are found in an impure state, sometimes oxidized and mixed with silicates of other metals. During casting, when the ore is exposed to high temperatures, these impurities are separated from the molten metal and can be removed. The mass formed by these compounds is slag. Slag is the co-prod
REM, Int. Eng. J.. Publicado em: 2017-12
-
14. Influence of casting heterogeneities on microstructure and mechanical properties of austempered ductile iron (ADI)
ABSTRACT An investigation was carried out to examine the influence of as-cast heterogeneities on the resulting microstructure and mechanical properties of an austempered ductile cast iron (ADI). A commercial hypereutectic ductile iron alloy with 3.59% C, 2.68% Si, 0.24% Mn and 0.46% Cu (in wt. %) was produced in a coreless induction furnace. The specimens we
Matéria (Rio J.). Publicado em: 10/08/2017
-
15. PHBV/cellulose nanofibrils composites obtained by solution casting and electrospinning process
ABSTRACT In this work, nanobiocomposites of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced with cellulose nanofibrils (CNFs) were produced by electrospinning and solution casting process. CNFs were obtained by sulfuric acid hydrolysis from Imperata brasiliensis fibers. Nanocomposites loaded with 1 (wt. %) of CNFs were prepared using a mixtur
Matéria (Rio J.). Publicado em: 20/07/2017
-
16. Electrochromic Properties of Polyaniline-Based Hybrid Organic/Inorganic Materials
Hybrid materials based on polyaniline (PAni) were obtained by in situ polymerization of aniline with chitosan and/or organically modified clay (nanomer I-24) in HCl. The samples were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and direct current (DC) electrical conductivity. Thi
J. Braz. Chem. Soc.. Publicado em: 2016-10
-
17. Influence of PLGA and PLGA-PEG on the dissolution profile of oxaliplatin
Abstract Oxaliplatin was inserted into polymeric matrices aiming to study the interaction of this drug with these polymers and its capability to diffuse to the environment. Tested polymers were: (1) polyethylene glycol (PEG), (2) poly(lactic-co-glycolic acid) (PLGA), and (3) a copolymer of them (PLGA-PEG). The latter two were synthesized by us using polycond
Polímeros. Publicado em: 07/06/2016
-
18. Sorbitol-Plasticized and Neutralized Chitosan Membranes as Skin Substitutes
Chitosan is soluble in diluted acid solutions and can easily form films by casting. However, residual acid neutralization should be performed for biomedical applications what may compromise physical and mechanical properties of the films. Thus, plasticizers can be added to improve these properties. The aim of this study was to characterize morphological, bar
Mat. Res.. Publicado em: 2015-08
-
19. The Role of cobalt and nickel intermetallic phases on the mechanical properties and microstructure evolution of Al-Zn-Mg-Cu alloys
In this study, the effects of cobalt and nickel additions on microstructure evolution and mechanical properties of Al-Zn-Mg-Cu alloys produced by chill casting process were investigated. Al-Zn-Mg-Cu aluminum alloys containing Ni and Co additives were homogenized at different heat treatment conditions, aged at 120ºC for 24 h, and retrogressed at 180ºC for 3
Mat. Res.. Publicado em: 2014-12
-
20. Development and characterization of hybrid materials based on biodegradable PLA matrix, microcrystalline cellulose and organophilic silica
The goal of this work was to investigate the production and properties of hybrid materials based on poly(lactic acid) (PLA), employing microcrystalline cellulose (MCC) and organophilic silica (R972) as fillers. The composites were obtained by solution casting to form films. Each nanoparticle was incorporated at 3 wt. %, relative to the polymer matrix. In thi
Polímeros. Publicado em: 30/09/2014
-
21. A quality assessment of titanium castings produced in an experimental short-heating-cycle investment
The aim of this study was to evaluate the quality of casting produced in an experimental short-term heating-cycle investment. Thus, reaction layer and castability of titanium casting using an experimental spinel-based investment (VR) with short heating cycle were compared with the commercial short-heating-cycle spinel-based investment Trinell (TR), the silic
Mat. Res.. Publicado em: 03/12/2013
-
22. Effect of processing on microstructure and properties of CoCrMoSi alloy
CoCrMoSi alloys microstructure is affected by processing and their properties have been associated with the high volume fraction of Laves phase. However, not much has been reported on the effect of structure refinement and morphology on the properties of these alloys. This paper evaluates a CoCrMoSi alloy processed by centrifugal casting and Plasma Transferr
Mat. Res.. Publicado em: 29/07/2013
-
23. Influence of poly(ethylene grycol) - (PEG) on the properties of influence of poly(3-hydroxybutyrate-CO-3-hydroxyvalerate) - PHBV
Films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) - PHBV with polyethylene glycol (PEG) were prepared by casting solvent evaporation. The thermal behavior, morphology, crystallinity and molecular weight of these films were studied by the following techniques: differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray diffraction (
Polímeros. Publicado em: 11/06/2013
-
24. Biodegradable sodium alginate and lignosulphonic acid blends: characterization and swelling studies
In this article, Sodium alginate and Lignosulphonic acid blends were prepared in different weight ratios by solution casting method. Swelling experiments were conducted for Sodium alginate and its blends by adding calcium chloride for various intervals in a pH 7.4 medium. The strength of the films increases after their treatment with CaCl2 at higher interval
Polímeros. Publicado em: 01/02/2013