Raw Materials Ceramic
Mostrando 13-24 de 78 artigos, teses e dissertações.
-
13. Peças Cerâmicas fabricadas usando pó de granito com adição dos produtos da combustão do carvão mineral: Caracterização Mecânica
RESUMO Foi estudada a viabilidade técnica da utilização de resíduos de granito como matéria prima na fabricação de corpos de prova cerâmicos, com adições dos Produtos da Combustão do Carvão Mineral (PCC’s) como fase reforço. Os materiais utilizados foram granito Asa Branca (RGAB) e os Produtos da Combustão do Carvão mineral (PCC´s), nas con
Matéria (Rio J.). Publicado em: 20/05/2019
-
14. Influência da espessura de revestimentos de argamassa no desempenho acústico de alvenarias de blocos cerâmicos
Resumo Percebe-se uma maior preocupação com o desempenho das edificações habitacionais após a publicação da NBR 15575 (ABNT, 2013a), tornando indispensável a avaliação e possível adequação de sistemas construtivos e seus materiais para atendimento dos requisitos. Dentre as imposições relativas à habitabilidade, encontra-se o desempenho acúst
Ambient. constr.. Publicado em: 2019-04
-
15. Influence of Processing Variables on Clay-Based Ceramic Formulations
The properties of ceramic materials and microstructural changes are dependent on the raw materials from which they are made and on the manner in which they are processed, from the composition to the established thermal treatment, heating rate, and firing temperature. In this study, the influence of some processing parameters (formulation, maturation time, an
Mat. Res.. Publicado em: 11/03/2019
-
16. Ceramic characterization of raw material with a high content of organic matter reduced by composting
Abstract The process of beneficiation of a peaty ceramic raw material extracted from the Poços de Caldas region, MG, through the composting method to reduce organic matter (OM) was analyzed. The raw materials used in separate piles were divided, keeping one of the samples pure (TP) and adding bovine wastes in the second (TB). The process lasted 6 months and
Cerâmica. Publicado em: 2019-01
-
17. Development of metakaolin and geopolymer proppants with nanocarbon materials
Abstract From the first hydraulic fracturing in the 40’s until nowadays, the techniques of each process step have evolved significantly. This study presents a new approach on the development of metakaolin (MK) and geopolymer based proppant with and without nanocarbon materials such as multi-walled carbon nanotubes and graphene oxide. For manufacturing the
Cerâmica. Publicado em: 2019-01
-
18. Resíduo do processo Kraft (dregs) como matéria-prima alternativa para cerâmica vermelha
Resumo Neste trabalho foi avaliada a utilização de dregs, um resíduo sólido inorgânico proveniente do processo Kraft, como matéria-prima alternativa em cerâmica vermelha. As matérias-primas foram caracterizadas por fluorescência de raios X, difração de raios X, distribuição de tamanho de partículas, análise térmica diferencial e termogravimé
Cerâmica. Publicado em: 2019-01
-
19. Uso de diopsídio em massas cerâmicas para grés sanitários
Resumo Atualmente, há uma severa escassez de jazimentos de feldspato de boa qualidade. Por outro lado, o diopsídio vem se mostrando um fundente alternativo para a indústria cerâmica, mas ainda pouco estudado. Assim, este trabalho avaliou o efeito da substituição parcial do feldspato pelo diopsídio em formulações para grés sanitário. Substituiu-se
Cerâmica. Publicado em: 2019-01
-
20. Evaluation of kaolin and bauxite from the Amazonian region addition on mechanical-, physical-, chemical properties and microstructural characterization of red ceramic industry clay of Manaus metropolitan region
ABSTRACT The present work investigated properties of red ceramic from the Amazonian region after the addition of kaolin and bauxite mixture with 0, 10, 20 and 30%wt. in red ceramic industry clay. Assessed mechanical properties were flexural strength and Young's modulus. The assessed physical properties were density and porosity. The microstructural images we
Matéria (Rio J.). Publicado em: 18/10/2018
-
21. Characterization and Evaluation of Ceramic Properties with Spherical and Prismatic Samples of Clay Used in Red Ceramics
The Brazilian red ceramic industry monthly consumes about 10.3 million tons of clay, its main raw material. In most potteries, characterization of the clay is made empirically, which can result in roof tiles and blocks not according to standards. In this sense, this paper aims to characterize clays used in the manufacturing of red ceramic products in a facto
Mat. Res.. Publicado em: 09/11/2017
-
22. Drying Contraction Assessment of Ceramic Products Produced by Extrusion or Pressing Formulated with Sheep Wool Waste
The main aim of this paper was to evaluate ceramic products containing a percentage of ash from sheep wool waste through drying linear shrinkage from a small brickyard in Bagé - RS. The ash percentages used in the formulation were 0, 5, 10, 20 and 30%. Raw materials were analyzed by Energy Dispersive X - ray Fluorescence (XRF/EDX). The methods used to shape
Mat. Res.. Publicado em: 18/05/2017
-
23. Decomposição ácida assistida por ultrassom para a determinação de Cu, Fe, Mg e Zn por F AAS em cerâmicas de uso doméstico
This paper describes a sample preparation method for domestic ceramics, based on the acid decomposition assisted by ultrasound for further determination of Cu, Fe, Mg and Zn by Flame Atomic Absorption Spectrometry technique. The main optimized conditions were: particle size (25 µm); sample mass (25 mg) and the acid volume (0.5 mL of HNO3 and 0.5 mL of HF).
Quím. Nova. Publicado em: 2017-04
-
24. Microstructure Evolution and Model Analysis of Al2O3/ZrO2 Hypoeutectic Ceramic During Rapid Solidification
Rapid solidification of the super high-temperature Al2O3/ZrO2 melt was studied by a novel method. The melt was prepared by explosion reaction using Al and Zr(NO3)4 as raw materials and then sprayed to Cu-plate. The heat transfer during the solidification process was analyzed by one-dimensional Finite Element Analysis. The cooling rate of the melt decreased w
Mat. Res.. Publicado em: 04/12/2015