Rapid Prototyping
Mostrando 1-12 de 57 artigos, teses e dissertações.
-
1. Photogrammetry and 3D prototyping: A low-cost resource for training in veterinary orthopedics
RESUMO: A prototipagem rápida (PR) é uma tecnologia inovadora que permite obter o protótipo de um molde com rapidez e precisão a partir de um modelo virtual. Esse estudo objetivou estabelecer o uso da fotogrametria e prototipagem 3D para a produção de biomodelos de ossos da espécie canina, para treinamento em técnicas ortopédicas em Medicina Veteri
Cienc. Rural. Publicado em: 25/11/2019
-
2. Cytotoxicity Assessment of a Poly(methyl methacrylate) Synthesized for the Direct Fabrication of Bone Tissues
ABSTRACT A cytotoxicity study is performed on a poly(methyl methacrylate) polymer (PMMA) to be used for the fabrication of bone tissue by Rapid Prototyping (RP). The solution polymerization is conducted in a pilot plant reactor using more appropriated reagents in consideration of the medical application. Moreover, the polymer is efficiently handled to avoid
Braz. arch. biol. technol.. Publicado em: 28/06/2018
-
3. How 3D printing technologies can contribute into an iterative design process? Case study to hit a drum for Disabled Children
Abstract In the Assistive Technology area and design for disability, users must be taken into account during the design process. Multidisciplinary design team is constituted and an adapted design methodology used. In this design case study, this team has to develop an electromechanical drumstick dedicated to percussion instruments. Objective is to allow Disa
Prod.. Publicado em: 26/10/2017
-
4. MODIFICAÇÃO DE MEMBRANA DE POLIAMIDA VIA SOL-GEL E INCORPORAÇÃO DE COMPOSTO DE EURÓPIO (III) LUMINESCENTE
Over the last decades, the combination of different technologies to search for systems with new properties and features has brought various segments of biological and earth sciences together. Additive manufacturing, known as rapid prototyping, combined with the sol-gel methodology enables the production of novel systems with applications in many scientific f
Quím. Nova. Publicado em: 2016-11
-
5. A digital approach for design and fabrication by rapid prototyping of orthosis for developmental dysplasia of the hip
Abstract Introduction Immobilization in a hip spica cast is required in surgical and nonsurgical treatments for children aged three months to four years diagnosed with developmental dysplasia of the hip. Skin complications are associated with the use of the spica cast in 30% of the cases. This research explores the use of photogrammetry and rapid prototypin
Res. Biomed. Eng.. Publicado em: 18/03/2016
-
6. PROTOTIPAGEM DE MICRORREATORES FOTOCATALÍTICOS E TESTES DE FOTODEGRADAÇÃO DE CORANTES ORGÂNICOS
A photocatalytic microreactor is defined as a microfluidic device, which is integrated with a photocatalytic coating of TiO2 deposited on the inner surface of microchannels. This device is capable of degradation of organic dye solution in water in a continuous flow under the action of ultraviolet light. The objectives of this work were to prese
Quím. Nova. Publicado em: 2015-07
-
7. Método de decisão dos processos de prototipagem rápida na concepção de novos produtos
A tecnologia de prototipagem de produtos por adição de material (Rapid Prototyping) e por remoção de material (Subtractive Rapid Prototyping) pode variar em: qualidade, tempo e custos, dependendo das características do produto. A escolha da tecnologia muitas vezes está condicionada à decisão empírica do designer/engenheiro ou operador, devido ao tip
Gest. Prod.. Publicado em: 2015-06
-
8. Shaping ability of Reciproc and TF Adaptive systems in severely curved canals of rapid microCT-based prototyping molar replicas
Objective: To evaluate the shaping ability of Reciproc and Twisted-File Adaptive systems in rapid prototyping replicas. Material and Methods: Two mandibular molars showing S-shaped and 62-degree curvatures in the mesial root were scanned by using a microcomputed tomography (μCT) system. The data were exported in the stereolitograhic format and 20 samples
J. Appl. Oral Sci.. Publicado em: 10/06/2014
-
9. Rapid prototyping of three-dimensional biomodels as an adjuvant in the surgical planning for intracranial aneurysms
PURPOSE: To fabricate a three-dimensional biomodels of intracranial aneurysms, using rapid prototyping technology, to facilitate optimal anatomical visualization of aneurysms prior to and during surgery. METHODS: Four intracranial aneurysms cases were selected for this study. Using CT angiography images, the rapid prototyping process was completed using a Po
Acta Cir. Bras.. Publicado em: 2013-11
-
10. Development of Lab-On-Chip systems for biophysical analysis. / Desenvolvimento de sistemas Lab-on-a-Chip para análises em biofísica celular.
Este estudo tem por objetivo o desenvolvimento de uma metodologia de fabricação de sistemas Lab On Chip, úteis no estudo de processos celulares, a partir da adaptação de tecnologias próprias da microeletrônica. Foram exploradas todas as etapas envolvidas na fabricação de sistemas Lab On Chip em Poli-Di-Metil-Siloxano e desenvolvidos protocolos de fa
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/03/2012
-
11. Control of uncertainties within an interdisciplinary design approach of a robust high heel
Within this paper the combination of several methods, developed and used in Collaborative Research Center (CRC) 805 - "Control of Uncertainties in Load Carrying Systems in Mechanical Engineering" of the DFG (German Research Foundation), is used to demonstrate the development of a load carrying system under uncertainty. The development starts with the identif
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
12. Proposta de modelagem e projeto de arquitetura de controle de sistemas híbridos aplicados em processos de manufatura industrial / A modeling proposal and design of a control architecture of hybrid systems applied on manufacturing industrial processes
Com o avanço da tecnologia têm sido incrementados a complexidade dos sistemas de produção industrial. Essa complexidade está marcada pela interação das variáveis que respondem a uma dinâmica baseada em eventos discretos e as variáveis que são descritas em relação ao tempo. Isto levou para uma mudança no paradigma dos sistemas automáticos de co
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/06/2011