Radial Reactor
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Tratamento de efluente de fecularia em reator anaerÃbio tubular horizontal piloto com meio suporte e agitaÃÃo / Treatment of cassava starch extraction effluent in a one phase Tubular horizontal reactor with support medium and agitation
As fecularias produzem diariamente um grande volume de manipueira, que, estabilizada em lagoas, desperdiÃa a energia do biogÃs e polui a atmosfera. Para contribuir com a reversÃo dessa realidade, desenvolveu-se esta pesquisa de tratamento de manipueira em reator anaerÃbio horizontal piloto com alimentaÃÃo contÃnua. O reator foi implantado numa fecular
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/05/2012
-
2. Modelagem e simulação de um reator catalítico de membrana inerte permseletiva a hidrogênio com transferência de calor e massa / Modeling and simulation of a catalytic reactor with a permselective to hydrogen inert membrane with heat and mass transfer
Dentre os termoplásticos mais utilizados atualmente na indústria, pode-se mencionar o estireno, principal responsável pela produção de plásticos e borrachas. No processo de fabricação de estireno, a principal rota química é por meio da desidrogenação de etilbenzeno, com o hidrogênio como subproduto. A conversão de etilbenzeno nesta reação é
Publicado em: 2011
-
3. Um novo método para síntese de vidros fotônicos baseado na sinergia entre as técnicas VAD e ALD / A new method for synthesis of photonic glasses based on the synergy between VAD and ALD techniques
This study aimed to establish a new method for synthesis of photonic glasses through the synergy of Vapor-phase Axial Deposition (VAD) and Atomic Layer Deposition (ALD) techniques. Having the intention to obtain a completely transparent material containing a uniform distribution of dopant element both radial and axial position. In the first stage of this stu
Publicado em: 2011
-
4. Medidas de taxas de reação nuclear e de índices espectrais ao longo do raio das pastilhas combustíveis do reator IPEN/MB-01 / Measurements of nuclear reaction rates and spectral indices along of the radius of fuel pellets at IPEN/MB-01 reactor
Este trabalho apresenta as medidas das taxas de reação nuclear ao longo da direção radial da pastilha combustível por irradiação e posterior espectrometria gama de um fino disco de UO2 com enriquecimento de 4,3% no reator IPEN/MB- 01. A partir de sua irradiação, a taxa de captura radioativa e de fissão foram medidas em função do raio do disco uti
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/12/2010
-
5. Flux and dose rate evaluation of iter system using MCNP5
The International Thermonuclear Experimental Reactor (ITER) will perform Deuterium-Tritium (DT) plasma experiments and the neutrons production rate at 14.1 MeV will achieve the level of 10(13) n.cm-2.s-1. In this work, the neutron flux and the dose rate during ITER operation has been calculated using the one-dimensional model of the Monte Carlo code MCNP5 an
Brazilian Journal of Physics. Publicado em: 2010-03
-
6. Desenvolvimento de processo contínuo de copolimerização em emulsão em reator tubular. / Development of a continuous emulsion copolymerization process in a tubular reactor.
Industrial emulsion polymerization processes are usually performed in batch or semi-batch stirred tanks, or in continuous stirred tank reactors (CSTR). Continuous reactors have the advantage of being smaller and providing a better product quality control by the reduction of the batch-to-batch variations. In addition, periodical self-sustained oscillations in
Publicado em: 2008
-
7. "Sistemas de análises químicas em fluxo explorando multi-impulsão e detecção espectrofotométrica: aplicação a formulações farmacêuticas e a extratos de solos" / Multi-pumping flow systems with spectrophotometric detection: application to analysis of pharmaceuticals and soil extracts
Multi-pumping flow systems (MP) utilize solenoid pumps as fluid propelling devices, which deliver pulsed flows. This feature was evaluated in relation to the design, operation and performance of the system, to the mixing conditions, and to the dispersion of the introduced solution. The general evaluation of the MP systems involved investigations about precis
Publicado em: 2006
-
8. Influência do tipo de impelidor sobre o desempenho do reator anaeróbio em batelada seqüencial com biomassa granulada tratando esgoto sintético / Influence of the impeller type on the performance of the anaerobic sequencing batch reactor with granulated biomass treating synthetic wastewater
Em um reator de fundo redondo e volume útil de 5 L tratando esgoto sintético com carga orgânica de 800 mgDQO. L POT.-1 com biomassa granulada a influência do tipo de escoamento e velocidade rotacional foi investigada com o uso de cinco impelidores sendo eles turbina e pá de seis pás planas verticais, turbina e pá de seis pás planas inclinadas 45 grau
Publicado em: 2006
-
9. Development and evaluation of a radial anaerobic/aerobic reactor treating organic matter and nitrogen in sewage
The design and performance of a radial anaerobic/aerobic immobilized biomass (RAAIB) reactor operating to remove organic matter, solids and nitrogen from sewage are discussed. The bench-scale RAAIB was divided into five concentric chambers. The second and fourth chambers were packed with polyurethane foam matrices. The performance of the reactor in removing
Brazilian Journal of Chemical Engineering. Publicado em: 2005-12
-
10. Desenvolvimento e avaliação de sistema de leito fixo reator misto radial seguido de reator anóxico horizontal, para remoção de matéria orgânica e de nitrogênio de esgoto sanitário / Immobilized bed system development and evaluation radial mixed reactor followed by horizontal-flow anoxic reactor for organic matter and nitrogen reduction in domestic wastewater
Os sistemas combinados anaeróbio/aeróbio, para tratamento de água residuária, têm sido considerados alternativas viáveis do ponto de vista técnico-econômico em relação aos sistemas tradicionais. Este trabalho consiste no desenvolvimento de nova configuração para um sistema, com dois reatores operados seqüencialmente, composto por Reator Misto Ra
Publicado em: 2003
-
11. Modelagem simulação e controle de um reator radial empregado na isomerização de xilenos
The great commercial interest in xylenes isomerization process is due to the high aggregated value conferred to p-xylene in many industrial applications. Typical industrial adiabatic fixed-bed reactor with radial centripet flow is used in this process. During operation catalyst activity decay uccurs due carbon compounds formation and deposition, reducing rea
Publicado em: 2002
-
12. Adaptive control using a hybrid-neural model: application to a polymerisation reactor
This work presents the use of a hybrid-neural model for predictive control of a plug flow polymerisation reactor. The hybrid-neural model (HNM) is based on fundamental conservation laws associated with a neural network (NN) used to model the uncertain parameters. By simulations, the performance of this approach was studied for a peroxide-initiated styrene tu
Brazilian Journal of Chemical Engineering. Publicado em: 2001-03