Pvd
Mostrando 1-12 de 143 artigos, teses e dissertações.
-
1. Mechanical behavior of PVD coatings deposited on ADI
ABSTRACT In this work, the mechanical behavior of the coated ADI system is studied. For this purpose, single layer Ti and bilayer Ti/TiN and TiAl/TiAlN coatings, with different thicknesses, were deposited by the PVD technique of cathodic arc deposition on high strength ADI substrates using industrial and experimental devices. The characterization of the coat
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Metallic Phthalocyanines: impact of the film deposition method on its supramolecular arrangement and sensor performance
Abstract This short review gives a concise overview of the impact of deposition methods on the supramolecular arrangement of metallic phthalocyanine films and their applications. Primarily, an introduction about the possible phthalocyanine molecular structures and derivatives obtained from modification on the phthalocyanine rings was presented. The possibili
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
3. An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718
ABSTRACT: This paper investigates the influences of three different input parameters, such as feed rate, insert nose radius, and insert coating methods, in the turning operation of Inconel 718. The coating methods were selected as medium temperature chemical vapor deposition (MT-CVD) and physical vapor deposition (PVD) and in addition to coating methods, the
J. Aerosp. Technol. Manag.. Publicado em: 25/02/2019
-
4. Dependence of Wear and Mechanical Behavior of Nitrocarburized/CrN/DLC Layer on Film Thickness
Diamond-like carbon (DLC) films are amorphous metastable carbon form that provide interesting mechanical and tribological properties. The role of film thickness influence upon wear and mechanical properties is of interest and not yet fully reported. In this study, two samples of previously plasma nitrocarburized, quenched and tempered H13 steel were duplex t
Mat. Res.. Publicado em: 31/01/2019
-
5. Tribological behavior of hydrogenated W-C/a-C:H coatings deposited by three different sputtering techniques
Abstract The evolution of structure, mechanical properties and friction behavior of DC magnetron sputtered (DCMS), high power impulse magnetron sputtered (HiPIMS) and high target utilization sputtered (HiTUS) W-C:H coatings was investigated as a function of the addition of acetylene and hydrogen into Ar atmosphere. The gradual addition of reactive gases caus
Cerâmica. Publicado em: 2019-01
-
6. Hot Pressing of Electrospun PVdF-CTFE Membranes as Separators for Lithium Batteries: a Delicate Balance Between Mechanical Properties and Retention
A systematic investigation of the effect of hot-pressing on polyvinylidene fluoride (PVdF) - chlorotrifluoroethylene (CTFE) electrospun membranes, intended as separators and substrate for the electrolyte of lithium batteries, has been carried out by means of dynamic mechanical analysis. Absorption and desorption gravimetric measurements and infrared spectros
Mat. Res.. Publicado em: 11/10/2018
-
7. Fatiga de contacto por rodadura en acero SAE 1050 recubierto con TiN, posteriormente templado
ABSTRACT The use of ceramic coatings of the nitride, carbide, or diamond type on steel substrates promotes the improvement of tribology properties. Nevertheless, high hardness gradients and adhesion problems may deteriorate the performance of these coatings when subjected to Rolling Contact Fatigue (RCF). Some studies on steels with ceramic coatings were car
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Preoperative care of Polypoid exposed mucosal template in bladder exstrophy: the role of high-barrier plastic wraps in reducing inflammation and polyp size
ABSTRACT Objective To assess the role of high-barrier plastic wrap in reducing the number and size of polyps, as well as decreasing the inflammation and allergic reactions in exstro- phy cases, and to compare the results with the application of low-barrier wrap. Materials and Methods Eight patients with bladder exstrophy-epispadias complex (BEEC) that had
Int. braz j urol.. Publicado em: 2018-06
-
10. Compactação do solo durante as operações de colheita em cinco solos tropicais de diferentes texturas sob florestas de eucalipto
RESUMO O tráfego de máquinas durante as operações de colheita e baldeio da madeira tem sido identificado como a principal fonte de degradação da estrutura do solo no sistema de produção florestal. A suscetibilidade à compactação e a compactação causada por cada operação de colheita florestal diferem de acordo com inúmeros fatores (como resist
Ciênc. agrotec.. Publicado em: 2018-02
-
11. Micro-Scale Abrasive Wear Testing of CrN Duplex PVD Coating on Pre-Nitrided Tool Steel
Specific wear rates were calculated from a series of micro-scale abrasive tests by means of the calotte-grinding method. The tested material was a CrN coating deposited by arc evaporation on ion-nitrided AISI H13 steel. Characterizations included: phase analysis, chemical composition, metallography, microhardness, micro-scratch resistance and nano-indentatio
Mat. Res.. Publicado em: 22/06/2017
-
12. Investigation of borided layers contribution on the wear resistance and adhesion of TiN coatings
ABSTRACT The purpose of the investigation was to examine the possibility of improving tool life by reducing the wear effect and improving the adhesion of a thin film through a compound configuration that consists in boriding and PVD deposition. Single layer coatings of TiN were deposited by PVD (cathodic arc) on quenched and tempered and on borided powder me
Matéria (Rio J.). Publicado em: 02/05/2017