Protective Layers
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel
ABSTRACT This work studies the high temperature corrosion behavior of new heat-resistant steel with salt coating method of 75%Na2SO4+25%NaCl coating on the steel surface at 700ºC. The chemical composition of corrosion products and surface morphology of the corrosion layer were analyzed using X-ray diffractometer (XRD), scanning electron microscopy (SEM), en
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Obtainment and Characterization of a Silicon alkoxides-based Coating Applied to a Substrate of Stainless Steel 316L for Use in Biomaterials
The silicon alkoxides-based coating is an alternative to control the release of cytotoxic ions through metal implants. This study evaluated the influence of the number of layers of a hybrid coating on the surface of austenitic stainless steel AISI 316L on the corrosion resistance. This coating was produced from the precursors of silicon alkoxides 3-(trimetho
Mat. Res.. Publicado em: 11/03/2019
-
3. Efecto de la concentración del silano MTMO sobre la protección contra la corrosión de acero electrocincado
ABSTRACT Superficial pretreatments based on silanes are one of the prominent alternatives to replace chromates as temporary protectors from the action of aggressive environments to metallic substrates. The barrier effect afforded by the silane film makes porosity, thickness and film homogeneity important issues in the protective effect. In the present work,
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Interference film grown on stainless steel by pulsed current process using chromium free vanadate solution
ABSTRACT Deposition of interference film is an alternative way for the formation of colored protective layers on the surface of stainless steels for decorative applications. The process involves growth of a chromium oxide film by electrochemical methods using in general sulphochromic solutions. However, it is well known that chromic acid contains Cr(VI), whi
Matéria (Rio J.). Publicado em: 05/03/2018
-
5. Ballistic Efficiency of Multilayered Armor Systems with Sisal Fiber Polyester Composites
The urban violence and the different types of global armed conflicts demand efficient protective systems against high energy ammunition. Multilayered Armor Systems (MAS) provide efficient protection by making use of lighter and more efficient materials. A typical MAS may be composed of three layers: a front ceramic followed by a composite, backed by a ductil
Mat. Res.. Publicado em: 15/01/2018
-
6. Surface Characterization of NiTi Superelastic and Shape Memory Alloys After Electrolytic Polishing
For the biomedical application of NiTi alloys, an excellent surface finishing process is required to guarantee high corrosion resistance and biocompatibility, eliminating the allergenic and toxic effects associated with the release of nickel ions in the body. Electropolishing is a process that can reduce surface imperfections and form a thin protective layer
Mat. Res.. Publicado em: 09/11/2017
-
7. Strengthening the composite protective shield of light-weight ship against ballistic impacts: analytical and experimental
Light and medium protection for small naval vessels guarantees their high performance and safety during the guard duties. In this study, a protective shield fabricated from Dyneema HB25 fibers has been utilized as an add-on layer on the coast guard boat hull. Finite element analyses have been conducted using Chocron's model. Two standards of gun-fire were em
Lat. Am. j. solids struct.. Publicado em: 2013-11
-
8. Obtenção e caracterização de revestimentos híbridos à base de precursores alcoóxidos sobre o aço galvanizado
Galvanized steel presents a protective layer of Zn and Zn-Fe, obtained by hot dipping, which promotes the steel protection. However, the presence of this layer decreases the adhesion of paint systems and reduces the corrosion resistance. A very efficient method used to protect against the substrate corrosion is chromate layers, which provide excellent antico
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
9. Efficacy of several Salmonella vaccination programs against experimental challenge with Salmonella gallinarum in commercial brown layer and broiler breeder hens
The protective effect of various Salmonella vaccines regimens against an experimental Salmonella Gallinarum challenge (SGNalr strain at 12 wk of age) was evaluated in two experiments. In Experiment 1 commercial brown layers were vaccinated according to one of the following programs: (i) two doses of a SE bacterin (Layermune SE; group 1); (ii) a first dose of
Revista Brasileira de Ciência Avícola. Publicado em: 2009-03
-
10. Avaliação de camadas de proteção para geomembranas de PVC e PEAD / Assessment of the performance of protective layers for PVC and HDPE geomembranes
The performance of non-woven geotextiles and soils as protection elements of polyvinyl chloride (PVC) and high density polyethylene (HDPE) geomembranes is studied. The materials used comprised PVC geomembranes of 1,0 and 2,0 mm thickness and HDPE geomembranes of 1,5 and 2,0 mm thickness while the protective layers were of non-woven polyester (PET) geotextile
Publicado em: 2009
-
11. Desempenho de camadas de proteção para geomembranas / Performance of protective layers for geomembranes
A eficiência das geomembranas como barreiras para controle e desvio de fluxo está diretamente relacionada com a integridade de sua superfície. Nos sistemas de impermeabilização basal, como utilizados em aterros sanitários, as geomembranas podem entrar em contato com materiais perfurantes e cortantes, como a brita do sistema de drenagem. Para prevenir p
Publicado em: 2008
-
12. Comparative investigation of the adhesion of Ce conversion layers and silane layers to a AA 2024-T3 substrate through mechanical and electrochemical tests
Cerium conversion layers and silane films are among the potential substitutes for the carcinogenic chromate conversion layers used to protect high-strength Al alloys. In the present work the adhesion of a cerium conversion layer and of a silane film to an aluminium alloy (AA) 2024-T3 substrate was investigated using mechanical and electrochemical tests. Scan
Materials Research. Publicado em: 2007-12