Programmable Logic Controller Plc
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. LOW-COST AUTOMATION OF FERTIGATION WITH PROGRAMMABLE LOGIC CONTROLLER AND GAS-FILLED SENSORS
ABSTRACT The aim of this study was to develop and evaluate a low-cost automation system for management of different fertigation regimes in tomato plants (Solanum lycopersicum L.) grown in a protected environment. The system consisted of an irrigation controller coupled to substrate moisture sensors and to a programmable logic controller (PLC). Four water reg
Eng. Agríc.. Publicado em: 2017-04
-
2. Implementation of supervisory control in PLCs using high-level language / Implementação de controle supervisório em CLPs usando linguagem de alto nível
Hoje em dia a competitividade entre as empresas está cada vez maior. Em um sistema de produção, a eficácia, a velocidade e a flexibilidade são importantes, pois significam redução de custos. Os sistemas de automação atuais estão cada vez mais complexos, justificando a necessidade de programas de controle mais eficientes, sem erros e de fácil manut
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/02/2012
-
3. Metodologia para implementação de controle supervisório modular local em controladores lógicos programáveis / Methodology for implementation of supervisory control local modular in programmable logic control
Currently, manufacturing automation has assumed an increasingly important role within the industry and the problems of automated control systems have become increasingly complex. Thus, the traditional use of empirical methods heavily base on the experience of the programmer can lead to inappropriate or ineffective solutions. In this case, the Supervisory Con
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
4. Application of adaptive control in a refrigeration system to improve performance
This paper reports an experimental investigation using adaptive control in a refrigeration system. This system is composed basically of a semi-hermetic compressor, concentric tubes heat exchangers, the condenser and evaporator, and thermostatic expansion valve (TXV). The refrigerant used in the refrigeration system was the HCFC-22 and also an AC frequency in
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-06
-
5. Automação do processo de soldagem a laser (Nd:YAG) para confecção das sementes de Iodo-125 utilizadas em braquiterapia / Development of an automation system for iodine-125 brachytherapy seed production by (Nd:YAG) laser welding
The aim of this work is to develop an automation system for iodine-125 radioactive seed production by (Nd:YAG) laser welding, which has been used successfully in Low Dose Rate (LDR) brachytherapy treatment. This small seed consists of a welded titanium capsule, with 0.8mm in diameter and 4.5mm in length, containing iodine-125 adsorbed onto a silver rod. The
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/09/2010
-
6. Study of a cooling system with air forced with monitoring of electrical energy consumption / Estudo de um sistema de resfriamento com ar forçado com monitoramento do consumo de energia eletrica
This work is a study of a classical controller implementation using tuning method referred to as IMC (Internal Model Control), aimed at reducing electrical energy consumption that proceed the appropriate relation between this consumption and cooling time of the cooling process with forced air. For this, the supervisory system installed is able to manipulate
Publicado em: 2010
-
7. Substituição do sincronismo mecânico por sincronismo eletrônico das correias e esteiras de envernizadeiras e impressoras litográficas de folhas metálicas
In the print industry for several segments and a segment of this is on printed sheet metal. This segment is the preparation of steel plates for the manufacture of cans of industry both for domestic use, as industrial. The treatment of steel is based on the application of varnishes and paints that protect the metal against rust and assists in the decoration a
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/12/2009
-
8. Integração de processos em tempo real para monitoramento e controle : aplicação para planta de PET
This work deals with the implementation of a soft-sensor for a PET (Polyethylene terephtalate) industrial process based on neural networks. The soft-sensor acts as redundant measure current for the polymer viscosity in the liquid phase; and, in case of mechanical faults, it is able to diagnoses the faults on the viscometer and can replace it.The viscosity co
Publicado em: 2003