Process Parameters
Mostrando 1-12 de 2764 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. The Contribution of Meteorological Parameters and the COVID-19 Partial Lockdown on Air Quality in Rio de Janeiro, Brazil
This study evaluated the pollutant levels (NO2, SO2, CO, and O3), air quality index (AQI) and the influence of meteorological variables and coronavirus disease (COVID-19) pandemic on the air quality in Rio de Janeiro. The data set used comprises periods before (March-April, 2019) and during pandemic (March-April, 2020). According to the AQI results, on most
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
3. Study of Catalytic Pyrolysis of Biomass Sorghum (Sorghum bicolor L. Moench) Using Design of Experiments and Surface Response Methodology
This study proposes a screen of variables that have an influence on the modification of the bio-oil chemical composition as a unique critical quality attribute (CQA) throughout the pyrolytic process (zeolite, ZSM-5) by using a 24 full factorial design, followed by optimization through a response surface methodology (RSM) based on central composite design (CC
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
4. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
5. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
6. Performance analysis of the beneficiation process of bauxite from the Juruti Mine. Industrial sampling and performance evaluation
Abstract Sampling campaigns were conducted at the industrial bauxite wash circuit of the Juruti Bauxite Mine in Pará, Brazil. The beneficiation circuit consisted of crushing, scrubber washing, wet screening, hydrocyclone classification, and fltration. Considering laboratory processing of samples and statistical analyses of historical operation databases, ma
REM - International Engineering Journal. Publicado em: 2022
-
7. Heterogeneous Fenton-like catalytic degradation of phenazine dye over CeO2 (CP-2) nanoscale powder
Abstract A heterogeneous Fenton-like process was explored for oxidation of phenazine dye using ceria polishing material (CP-2). XRD, SEM, FTIR, UV-vis DRS, and pHPZC techniques were applied to characterize the catalyst features. The performance of the heterogeneous Fenton-like process was investigated under various parameters (reaction time, pH, H2O2 concent
Cerâmica. Publicado em: 2022
-
8. A Physical Study to Explain Response Differences between the BID and FID Detectors for PAHs and Pesticides
The dielectric barrier discharge ionization detector (BID) is one of the most modern detectors commercially available for gas chromatography (GC). Its technology based on the sample ionization through the energy released from the helium plasma generation process gives it the ability to act as a universal detector and a greater response to various types of co
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. Cascade Modeling of the Measuring System Used to Assess S-Parameters of Anchor Rods on Power Transmission Lines Guyed Towers
Abstract The structural condition of the cable-stayed towers anchorage on power transmission lines requires constant monitoring. Maintenance routines must be able to identify faulty anchor rods and substitute them to avoid tower collapses and power delivery interruptions. Modern statistical diagnostic systems based on machine learning requires the generation
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
10. Thermal, structural and optical properties of magnetic BiFeO3 micron-particles synthesized by coprecipitation method: heterogeneous photocatalysis study under white LED irradiation
Abstract Bismuth ferrite, BiFeO3 (BFO) prepared via a coprecipitation method, was used as an effective photocatalyst for the degradation of methylene blue (MB) using a white light-emitting diode (LED-50 W) lamp. The as-prepared material was characterized by TGA, XRD, SEM-EDX, FTIR, and UV-vis-DRS techniques. The effects of experimental key parameters such as
Cerâmica. Publicado em: 2022
-
11. TEST OF THE SCREENING AND PARAMETER OPTIMIZATION OF SWING SEPARATION SIEVE IN FIELD OPERATION
ABSTRACT The need for clarity regarding the sieving characteristics of the potato-soil mixture, as provided by the swing separating sieve of a potato digger, as well as the derived problems of low potato transportation efficiency, a high potato damage rate and low potato unearthing rate, are the main reasons for this study. Dynamic tracking technology is pro
Engenharia Agrícola. Publicado em: 2022
-
12. Do Body Mass Index Levels Correlate with Tinnitus Among Teachers?
Abstract Introduction Working conditions can contribute to the development of lifestylerelated diseases among teachers, including obesity and tinnitus. Describing tinnitus in relation to characteristics and comorbidities can help the treatment and prognosis of teachers affected by this symptom. Objective To verify a possible association between tinnitus co
International Archives of Otorhinolaryngology. Publicado em: 2022