Predictive Control Systems
Mostrando 1-12 de 60 artigos, teses e dissertações.
-
1. Modelo de predicción de la deserción estudiantil de primer año en la Universidad Bernardo O´Higgins
Abstract The objective of this study is to model a retention predictive system for first-year students at Universidad Bernardo O’Higgins (Santiago de Chile), by determining which of the variables of entry into higher education, whether these are academic, social or relatives, are revealed significant for this analysis. The construction of the research mode
Educ. Pesqui.. Publicado em: 18/06/2018
-
2. Reconstruction of gait biomechanical parameters using cyclograms and artificial neural networks
Abstract Introduction Historically, assessing the quality of human gait has been a difficult process. Advanced studies can be conducted using modern 3D systems. However, due to their high cost, usage of these 3D systems is still restricted to research environments. 2D systems offer simpler and more affordable solutions. Methods In this study, the gait of 4
Res. Biomed. Eng.. Publicado em: 17/08/2017
-
3. TUNING OF MODEL PREDICTIVE CONTROL WITH MULTI-OBJECTIVE OPTIMIZATION
Abstract Two multi-objective optimization based tuning methods for model predictive control are proposed. Both methods consider the minimization of the error between the closed-loop response and an output reference trajectory as tuning goals. The first approach is based on the ranking of the outputs according to their importance to the plant operation and it
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
4. Uso de dispositivo de control solar en aulas: impacto en la simulación dinámica de la iluminación natural
The use of daylighting in educational spaces contributes from different perspectives such as energy, health and comfort. However it requires careful planning during design. The aim of this study is to determine the impact of solar control system in two classrooms (north-south orientation and east-west orientation), typical of regional educational buildings,
Ambient. constr.. Publicado em: 2014-09
-
5. Multi-model MPC with output feedback
In this work, a new formulation is presented for the model predictive control (MPC) of a process system that is represented by a finite set of models, each one corresponding to a different operating point. The general case is considered of systems with stable and integrating outputs in closed-loop with output feedback. For this purpose, the controller is bas
Braz. J. Chem. Eng.. Publicado em: 2014-03
-
6. Controle preditivo baseado em modelo neuro-fuzzy de sistemas não-lineares aplicado em sistema de refrigeração = : Model predictive control based on neuro-fuzzy nonlinear systems applied to a refrigeration plant / Model predictive control based on neuro-fuzzy nonlinear systems applied to a refrigeration plant
Refrigeration systems can be found in many different branches of industry and are characterized as great energy consumers with considerable non-linear behavior. Several studies have been developed to promote the reduction of energy costs and to minimize the effects of nonlinearities in these systems. The use of automation and process control, particularly th
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/07/2012
-
7. Estratégias com garantia de estabilidade para a integração de controle preditivo e otimização em tempo real. / Strategies with guarantee of stability for the integration of model predictive control and real time optimization
The aim of this Thesis is the development of predictive controllers (MPC) with guarantee of stability and that are part of a control structure where Real Time Optimization (RTO) is present and produces optimizing targets for the predictive controller. The approaches of two and three-layer are considered. Three different strategies are presented: the first st
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/03/2012
-
8. Controle PID e Preditivo â Aspectos TeÃricos e de ImplementaÃÃo PrÃtica / Control PID AND Predictive - Theoretical Aspects and Practical Implemantation
Nowadays, we observe the exponential increasing of demand for performance optimization in all areas of modern life. This search for better performances is also occurring in all industry sectors, either factory or energy activities. This best performances reflects an increase is all levels and achieve enormously the process control systems. With more strict p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/09/2011
-
9. Fault-tolerant state estimation of linear Gaussian systems subject to additive faults
Owing to the need for the satisfaction of attributes such as safety, maintainability, and reliability in modern critical engineering devices, the design of automatic feedback control systems has increasingly demanding fault-tolerant methods. In particular, if the system states cannot directly be measured by the available suite of sensors, a fault-tolerant st
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2011
-
10. Controle preditivo de sistemas híbridos
A necessidade da indústria de aprimorar aspectos da produção como qualidade e eficiência fizeram com que técnicas e dispositivos de controle mais eficientes fossem adotados atendendo às diversidades que ocorrem nos sistemas. Porém, a maioria dos sistemas não caracteriza-se apenas pela dinâmica contínua geralmente aplicada a descrição de seu compo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/03/2011
-
11. Controle preditivo de horizonte infinito para sistemas integradores e com tempo morto. / Model predictive control of integrating systems with dead time.
Model Predictive Control (MPC) has gained wide acceptance in chemical industry in the last 30 years. The basic principle of this technique is to use a model to calculate plants future behavior based on the inputs it would receive in the next sampling periods. It must be set an objective, mainly composed of some measure of the distance between plants predicte
Publicado em: 2011
-
12. Controle preditivo não-linear baseado em multimodelos aplicado ao motor de indução / Induction motor non-linear predictive control based on a multimodeling approach
Uma abordagem preditiva global-local para o controle de um motor de indução é apresentado nesta tese. O conceito de controle preditivo diz respeito a uma classe de controladores que tem se desenvolvido muito no âmbito do controle de sistemas de conversão de energia nos últimos anos, acompanhando o desenvolvimento da capacidade computacional dos sistema
Publicado em: 2010