Precast
Mostrando 1-12 de 106 artigos, teses e dissertações.
-
1. Reliability and geotechnical safety applied to deep foundations in precast concrete piles - case study
Abstract The Brazilian standard pertinent to the design and execution of foundations, NBR 6122/2019, establishes that the safety inspection of foundations of a given project must be conducted based on compliance with specified safety factors. Safety factor verification is imperative to meet regulatory requirements; however, it is not enough to guarantee the
REM, Int. Eng. J.. Publicado em: 2021-01
-
2. Forecasting bearing capacity performance with semi-empirical and theoretical methods applied to precast concrete piles founded on sandy clay in the region of Uberlândia-MG, Brazil
Abstract This article presents a study on the performance of semi-empirical methods based on the Standard Penetration Test (SPT) for the prediction of bearing capacity already disseminated in the practice of Brazilian Foundation Engineering (Aoki and Velloso, 1975; Décourt and Quaresma, 1978, 1996; Teixeira,1996), together with the recent method proposed by
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. Collusion: How Central Bankers Rigged the World
Abstract This article presents a study on the performance of semi-empirical methods based on the Standard Penetration Test (SPT) for the prediction of bearing capacity already disseminated in the practice of Brazilian Foundation Engineering (Aoki and Velloso, 1975; Décourt and Quaresma, 1978, 1996; Teixeira,1996), together with the recent method proposed by
Contexto int.. Publicado em: 2020-12
-
4. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
5. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
6. Plate with holes as shear connector in cold formed steel composite beams
Resumo Buscando compatibilizar as estruturas em perfil formado a frio com os sistemas de piso com pré-laje, foi proposta nesse trabalho uma alternativa de conector de cisalhamento para vigas mistas compostas por perfil formado a frio que visa maximizar a área disponível para apoio das pré-lajes durante o processo construtivo. Trata-se de um conector em c
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
7. Development of Improved Models for Estimation of Bursting Stresses in Elements under High-Concentrated Load
Abstract In precast concrete segmental tunnels, radial and circumferential joints are often the most highly stressed parts and it is therefore important to use appropriate equations to accurately analysed these joints during design and provide adequate structural capacity to avoid failure. Different design codes have put forward equations for the estimation
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
8. Acoustical and thermal performance of multilayer closing panels used in steel-structured buildings
Abstract This article provides an evaluation of the acoustical and thermal performance of some closing systems by referencing materials such as cement plates, plasterboard walls, precast concrete panels and expanded polystyrene. Reverberation time is calculated by applying an empirical formula, which uses temperature and relative air humidity values obtained
REM, Int. Eng. J.. Publicado em: 2017-06
-
9. Measurement and evaluation of human exposure to vibration transmitted to hand-arm system during leisure cyclist activity
INTRODUCTION: The cycling activity has increased in recent years, either as a means of leisure or physical activity or as means of transport. Discomfort is one of the main complaints for cyclists, especially when related to the type o pavement they use while riding. This work presents a study of measurement and evaluation of human exposure to hand-arm vibrat
Rev. Bras. Eng. Bioméd.. Publicado em: 2014-12
-
10. A numerical study on seismic response of self-centring precast segmental columns at different post-tensioning forces
Precast bridge columns have shown increasing demand over the past few years due to the advantages of such columns when compared against conventional bridge columns, particularly due to the fact that precast bridge columns can be constructed off site and erected in a short period of time. The present study analytically investigates the behaviour of self-centr
Lat. Am. j. solids struct.. Publicado em: 2014-10
-
11. Effect of the heat curing on strength development of self-compacting mortars containing calcined silt of dams and Ground Brick Waste
The strength development of self-compacting mortars (SCM) containing calcined silt (CS) and ground brick waste (GWB) was investigated. The variables are the nature of addition (CS and GWB) in the binder and the heat curing at different temperatures (20 ºC and 60 ºC) at 7 and 14 days of curing. Two temperatures 20 and 60 ºC were applied to samples with int
Mat. Res.. Publicado em: 18/06/2013
-
12. Concreto ultraleve® estrutural com pérolas de EPS: caracterização do material e estudo de sua aplicação em lajes / Structural ultra lightweight concrete with EPS beads: material characterization and study of its use in slabs
The use of lightweight concrete is mainly due to the benefits provided by reducing the density of the material such as smaller efforts on structures, economy of molds and scaffolding, as well as lower costs of transportation and erection of precast constructions. Currently, besides the technical and economic issues, the choice of building materials should ta
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/10/2012