Powders
Mostrando 1-12 de 494 artigos, teses e dissertações.
-
1. Synthesis of delafossite CuCrO2 via solution combustion method and its acid functionalization for biodiesel production
Abstract CuCrO2 was synthesized by solution combustion synthesis (SCS) and applied as a heterogeneous catalyst to produce soybean biodiesel. The combustion reaction was carried out using urea as a fuel, and copper (II) and chromium (III) nitrates as precursors. After the powders’ obtention, these were calcined and functionalized in an acidic medium. The po
Cerâmica. Publicado em: 2023
-
2. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
3. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
4. Synthesis and characterization of α-SnWO4 powders obtained by microwave-assisted hydrothermal method
Abstract The structural, morphological, and optical properties of α-SnWO4 synthesized by microwave-assisted hydrothermal method at 150 °C for different times were investigated. XRD revealed the formation of the orthorhombic phase, without the presence of a secondary phase. The sample processed for 64 min showed a reduction in unit cell volume, suggesting a
Cerâmica. Publicado em: 2022
-
5. Effect of pH level and calcination on the production of calcium phosphates by acidic route of wet precipitation
Abstract Multiphasic calcium phosphate powders were synthesized by the acidic route, using lactic acid as a chelating agent that allows the production of a stable and rich solution of calcium and phosphate ions at room temperature. After pH adjusting, without varying the concentrations of precursor solution, XRD and FTIR analyses showed different CaP phases
Cerâmica. Publicado em: 2021-06
-
6. Synthesis and characterization of niobium-doped fish scale-derived hydroxyapatite by physical ultrasound interference
Abstract Fish scales of the Arapaima gigas (pirarucu) species were heat-treated to obtain natural hydroxyapatite (HAp), and it was doped with niobium (Nb) by physical ultrasound interference to confirm an effective route to the production of Nb-doped HAp powders. The effect of ultrasound application on doping was investigated. The structure of the powders wa
Cerâmica. Publicado em: 2021-03
-
7. Study of structural, optical, and morphological characteristics of manganese titanate (MnTiO3) obtained by combustion reaction using microwave energy
Abstract MnTiO3 is a semiconductor that has relevant dielectric and optical properties. For the synthesis of manganese titanate (MnTiO3) powders, the combustion method via microwave and subsequent calcination at 500, 700, and 900 °C were used. The structural, morphological, and optical properties of the samples were investigated. X-ray diffraction analyzes
Cerâmica. Publicado em: 2021-03
-
8. INFLUENCE OF ALBUMIN ON GUAVA PULP POWDER OBTAINED BY FOAM-MAT DRYING
ABSTRACT Guava is a fruit that stands out for its aroma, intense flavor, vitamins, and minerals. Its availability as a powdered food enhances its commercial applications. This study aimed to evaluate mathematical models for adsorption isotherms and determine the properties and flowability of guava pulp powder obtained by foam-mat drying. The models of GAB, B
Eng. Agríc.. Publicado em: 2020-06
-
9. Development of a dehydrated product with edible film characteristics from mammee apple (Mammea americana L.) using Refractance Window drying
Abstract The Mammee apple (Mammea americana L.) is a widely grown fruit, popular in tropical areas, which is mainly consumed fresh. Refractance Window (RW) drying is used to produce food films, flakes, and powders, and may be an alternative to commercially used dry food production methods. The aim of this study was to obtain a dehydrated product from the pul
Food Sci. Technol. Publicado em: 2020-03
-
10. Synthesis of a Ce-Based MOF-76 with High Yield: A Study of Reaction Parameters Based on a Factorial Design
The purpose of this work was to optimize the synthesis yield of {[Ce(BTC)(H2O)]·DMF}n, a metal-organic framework (MOF)-76 family member, by solvothermal method. CeCl3.7H2O and 1,3,5-benzenetricarboxylic acid, 2:1 molar proportion, were added to N, N-dimethylformamide (DMF). Reaction time and temperature were evaluated to optimize the synthesis through a fac
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
11. PARTICLE SIZE DISTRIBUTION APPLIED TO MILK POWDER REHYDRATION
Besides increasing shelf life of fluid milk, milk powder has physical and functional properties that allow it to be used as ingredient. The rehydration process is complex and happens in four steps: wettability, sinkability, dispersibility and solubility. Works have been conducted aiming at the development of an easier, more convenient and reproducible method
Quím. Nova. Publicado em: 2020-02
-
12. Experimental and Theoretical Study of LiMn2O4 Synthesized by the Solution Combustion Method Using Corn Starch as Fuel
Lithium manganese oxide, LiMn2O4, was synthesized in two temperature stages, where the first consisted by an ecofriendly solution combustion method at 300 °C. Finally, the as-burned powders were thermal treated at 500 and 700 °C. The structural and morphological changes were evaluated by the Rietveld method and density functional theory (DFT) calculations.
J. Braz. Chem. Soc.. Publicado em: 2020-02