Porous Structures
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
2. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
3. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
4. Frequency Selective Surface Properties of Microwave New Absorbing Porous Carbon Materials Embedded in Epoxy Resin
In this manuscript, the electromagnetic wave absorption properties of sustainable porous carbon composites were evaluated over the X-band frequency range (8.2 - 12.4 GHz). The porous carbon material was made from the byproduct of cellulose production and was used as additive on the development of radar absorbing material (RAM) composites. These porous carbon
Mat. Res.. Publicado em: 21/10/2019
-
5. Influence of sintering temperature on the development of alumina membrane shaped by centrifugal casting for gas separation
Abstract The development of ceramic membranes for the most diverse separation processes has gained high visibility, mainly due to their better performance in harsh environments in comparison to polymeric materials. Among the different techniques used to prepare tubular ceramic membranes, the centrifugal casting (CC) is interesting for obtaining highly homoge
Cerâmica. Publicado em: 2019-01
-
6. Two-scale topology optimization of macrostructure and porous microstructure composed of multiphase materials with distinct Poisson’s ratios
Abstract Negative Poisson’s ratio (NPR) material attracts a lot of attentions for its unique mechanical properties. However, achieving NPR is at the expense of reducing Young’s modulus. It has been observed that the composite stiffness can be enhanced when blending positive Poisson’s ratio (PPR) material into NPR material. Based on the respective inter
Lat. Am. j. solids struct.. Publicado em: 29/11/2018
-
7. OS LANTANÍDEOS NAS REDES METALORGÂNICAS: UMA NOVA CLASSE DE MATERIAIS POROSOS
Lanthanoid organic frameworks (LOFs) stand out as an important class of functional materials. The possibility to employ a great range of metals and ligands lead to the formation of varied and highly porous structures, with diverse applications. The presence of lanthanoid ions favours the improvement of the optical, magnetic and redox properties of MOFs. This
Quím. Nova. Publicado em: 2018-06
-
8. A Novel Porous Diamond - Titanium Biomaterial: Structure, Microstructure, Physico-Mechanical Properties and Biocompatibility
ABSTRACT With the aim of introducing permanent prostheses with main properties equivalent to cortical human bone, Ti-diamond composites were processed through powder metallurgy. Grade 1 titanium and mixtures of Ti powder with 2%, 5% and 10 wt% diamond were compacted at 100MPa, and then sintered at 1250°C/2hr/10-6mbar. Sintered samples were studied in the po
An. Acad. Bras. Ciênc.. Publicado em: 11/12/2017
-
9. A Model for the Formation of Niobium Structures by anodization
The fluoride use for anodizing electrolytes has been primarily responsible for the formation of nanoporous oxides at valve metals, except aluminum, since it causes a dissolution process. This study presents the formation of an oxide model according to the following anodizing parameters: 100 V, 12.73 mA/cm2, room temperature and the niobium samples anodized i
Mat. Res.. Publicado em: 25/05/2017
-
10. Fabricación de alúmina anódica porosa de bajo costo: Un estudio comparativo de la morfología producida por uno y dos pasos de anodizado
ABSTRACT A simple and low cost method for the fabrication of Nanoporous alumina templates with potential applications for nanowires fabrication is described. As raw material, commercial aluminum has been used. The nanoporous templates obtained have a mean pore diameter of (20 ± 4) nm. The fabrication process consists mainly of two-step anodization. Both ste
Matéria (Rio J.). Publicado em: 2016-09
-
11. On the Validation of a Numerical Model for the Analysis of Soil-Structure Interaction Problems
Abstract Modeling and simulation of mechanical response of structures, relies on the use of computational models. Therefore, verification and validation procedures are the primary means of assessing accuracy, confidence and credibility in modeling. This paper is concerned with the validation of a three dimensional numerical model based on the finite element
Lat. Am. j. solids struct.. Publicado em: 2016-08
-
12. Nano and Micro Ceramic Membranes from Degradable Templates
Abstract The nano/microstructures with highly porous surface area have attracted tremendous attention, particularly the synthesis and tailoring of porous and hollow materials of high performance. In this paper, an easy method of cost-effective synthesis of hollow ceramic fiber membranes based on Hydroxyapatite, TiO2 and ZrO2 stabilized with Yttrium, is propo
Mat. Res.. Publicado em: 28/07/2016