Porous Structure
Mostrando 1-12 de 171 artigos, teses e dissertações.
-
1. Biogenic synthesis of silver nanoparticles from thyme extract for functionalization of a bioactive glass produced from rice husk ash
Abstract The rice husk, agro-industrial residue, stands out for having silica, the main oxide former of the bioactive glass. To avoid contamination in this biomaterial, substances with bactericidal properties, like silver can be incorporated. Thus, the objective of this work is the synthesis of silver nanoparticles to functionalize a bioactive glass synthesi
Cerâmica. Publicado em: 2022
-
2. Simple and fast process using hydrochloric acid for producing synthetic zinc-rich stevensite
Abstract In the last decades, clays have been used in sectors such as health and cosmetics. This requires products that are increasingly pure and present homogeneous properties, hardly found in natural clays. The use of synthetic clays can be a solution. For this, it is necessary to explore techniques for their production. The main focus of this study was to
Cerâmica. Publicado em: 2022
-
3. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
4. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
5. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
6. Reordering of Depolymerized Silicates as Adsorbents for Large Nitrogen Compounds
The adsorption capacities of two synthesized zeolites (crystalline ZSM-5 and semi-crystalline faujasite Y) for a mixture of indole, quinoline and carbazole were studied. The different samples obtained show different crystalline degree, mesoporosity and Si/Al ratios. The synthesis procedure is based on the simultaneous depolymerization of a mixture of high su
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
7. Experimental and Theoretical Study of LiMn2O4 Synthesized by the Solution Combustion Method Using Corn Starch as Fuel
Lithium manganese oxide, LiMn2O4, was synthesized in two temperature stages, where the first consisted by an ecofriendly solution combustion method at 300 °C. Finally, the as-burned powders were thermal treated at 500 and 700 °C. The structural and morphological changes were evaluated by the Rietveld method and density functional theory (DFT) calculations.
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
8. Morphology, Crystalline Structure and Chemical Composition Of MAO Treated Ti-15Zr-Mo Surfaces Enriched with Bioactive Ions
In this study, MAO treatment was used to enrich, with bioactive Ca, Mg and P atoms, as-casted and heat-treated Ti-15Zr-xMo (x = 0, 5, 10 and 15 wt%) alloys, for potential use as advanced metallic biomaterials. The chemical composition of the surface was evaluated by EDS and XPS measurements. The morphology and microstructure was analyzed by OM and SEM images
Mat. Res.. Publicado em: 09/12/2019
-
9. Production of Carbon Foams from Rice Husk
The production of a material with rigid, multifunctional three-dimensional porous structure at a low cost is still challenging to date. In this work, a light and rigid carbon foam was prepared using rice husk as the basic element through a simple fermentation process followed by carbonization. For the fermentation process, the amount of biological yeast (7.5
Mat. Res.. Publicado em: 11/11/2019
-
10. Micelas de caseína: dos monômeros à estrutura supramolecular
Resumo A importância primária das micelas de caseína reside no fato de que os processos empregados na transformação do leite em quaisquer de seus derivados dependem, direta ou indiretamente, de sua estabilidade ou de sua desestabilização controlada. Assim, o objetivo do presente trabalho é apresentar uma revisão atualizada sobre a organização estr
Braz. J. Food Technol.. Publicado em: 24/10/2019
-
11. Frequency Selective Surface Properties of Microwave New Absorbing Porous Carbon Materials Embedded in Epoxy Resin
In this manuscript, the electromagnetic wave absorption properties of sustainable porous carbon composites were evaluated over the X-band frequency range (8.2 - 12.4 GHz). The porous carbon material was made from the byproduct of cellulose production and was used as additive on the development of radar absorbing material (RAM) composites. These porous carbon
Mat. Res.. Publicado em: 21/10/2019
-
12. The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel
ABSTRACT This work studies the high temperature corrosion behavior of new heat-resistant steel with salt coating method of 75%Na2SO4+25%NaCl coating on the steel surface at 700ºC. The chemical composition of corrosion products and surface morphology of the corrosion layer were analyzed using X-ray diffractometer (XRD), scanning electron microscopy (SEM), en
Matéria (Rio J.). Publicado em: 16/09/2019