Porous Materials
Mostrando 1-12 de 182 artigos, teses e dissertações.
-
1. A review on the production of porous ceramics using organic and inorganic industrial waste
Abstract The use of industrial waste in compositions of ceramic masses has attracted great interest from the scientific community, as they can be considered abundant and diversified alternative sources of raw materials. At the same time, there is a growing interest in the development of porous ceramics due to their wide possibilities for use in various field
Cerâmica. Publicado em: 2022
-
2. Alumina applied in bone regeneration: Porous α-alumina and transition alumina
Abstract Alumina is a polymorphic bioceramic that has been extensively investigated for application in bone regeneration. Dense α-alumina has been considered a suitable biomaterial for dental and orthopedic implants due to its superior mechanical properties. However, its use is limited due to its high inertia in a biological environment. Recent investigatio
Cerâmica. Publicado em: 2022
-
3. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
4. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
5. Antifungal and Photocatalytic Activity of Smart Paint Containing Porous Microspheres of TiO2
In this study, porous microspheres of TiO2 (µTiO2) were synthesized, characterized and incorporated into an acrylic paint formulation to obtain a photocatalytically active paint. In a novel approach, the antifungal properties of the µTiO2 paint were evaluated using Monascus ruber as the representative microorganism and compared to those of a photocatalyst-
Mat. Res.. Publicado em: 20/01/2020
-
6. Imidazolium-based Ionic Liquids Impregnated in Silica and Alumina Supports for CO2 Capture
Ionic liquids (ILs) physical immobilization in solid materials is a key strategy for developing efficient and low cost CO2 capture processes. In this work, two porous commercial substrates with different characteristics (silica and alumina) were impregnated with ILs by physical wet method. Imidazolium based IL combined with [Br]- and [Tf2N]- anions were used
Mat. Res.. Publicado em: 11/11/2019
-
7. Frequency Selective Surface Properties of Microwave New Absorbing Porous Carbon Materials Embedded in Epoxy Resin
In this manuscript, the electromagnetic wave absorption properties of sustainable porous carbon composites were evaluated over the X-band frequency range (8.2 - 12.4 GHz). The porous carbon material was made from the byproduct of cellulose production and was used as additive on the development of radar absorbing material (RAM) composites. These porous carbon
Mat. Res.. Publicado em: 21/10/2019
-
8. The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel
ABSTRACT This work studies the high temperature corrosion behavior of new heat-resistant steel with salt coating method of 75%Na2SO4+25%NaCl coating on the steel surface at 700ºC. The chemical composition of corrosion products and surface morphology of the corrosion layer were analyzed using X-ray diffractometer (XRD), scanning electron microscopy (SEM), en
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Duplo Benefício Ambiental pela Remoção de Corantes Fotosensibilizadores da Água com Uso de Resíduo Sólido Particulado
RESUMO As indústrias têxteis estão entre os setores mais poluidores do mundo, principalmente pelo descarte de resíduos de corantes sintéticos nos efluentes. Alguns processos têm sido utilizados atualmente para a remoção de corantes dos efluentes, mas apresentam as desvantagens de baixa viabilidade econômica e dificuldade de reprodução em larga esc
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Produção e caracterização de revestimentos de ligas metálicas Cu-Sn em banho eletrolítico contendo glicina: ensaios preliminares
RESUMO Os problemas relacionados à corrosão são frequentes, podendo ocorrer nas mais variadas áreas, tais como, nas indústrias química, petroquímica, naval, de construção civil e automobilística, dentre outros setores produtivos. Portanto, métodos para prevenir a corrosão devem ser empregados para evitar a perda de materiais e o uso de revestimen
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Efeito da temperatura de sinterização e da adição de fibras poliméricas em cerâmica porosa obtida a partir de resíduos do processo Kraft
Resumo O processo Kraft gera resíduos que podem ser aplicados em diversos processos produtivos, substituindo matérias-primas comerciais, como lama de cal e areia, ricos em carbonato de cálcio e sílica, respectivamente. Neste trabalho foi realizado um estudo para obtenção de cerâmicas porosas a partir da valorização desses resíduos, utilizando-se fi
Cerâmica. Publicado em: 15/08/2019
-
12. Membranas de fibra oca de polietersulfona: efeito do líquido interno e da adição de argila
RESUMO As membranas poliméricas vêm sendo bastante utilizadas no processo de tratamento de efluentes em todo mundo, solucionando problemas médicos, sociais e ambientais. Sendo assim, membranas de fibra oca foram produzidas a partir da polietersulfona (PES), adicionando a argila Cloisite Na – CLNa e também inserindo o solvente N,N dimetilformamida (DMF)
Matéria (Rio J.). Publicado em: 13/06/2019