Pore Structure
Mostrando 13-24 de 412 artigos, teses e dissertações.
-
13. Biodegradable oil-based polymeric coatings on urea fertilizer: N release kinetic transformations of urea in soil
ABSTRACT: Polymer coatings are used to control the rate of release of plant available nutrients from fertilizers as well as to reduce nutrient losses such as ammonia (NH3) volatilization. Although the literature presents several examples of materials used to coat urea, little is known about nitrogen (N) release properties such as the mechanism involved and p
Sci. agric. (Piracicaba, Braz.). Publicado em: 01/07/2019
-
14. Nanoporous Pd with Tunable Pore Size prepared by Dealloying Pd 30Cu40Ni10P20 Metallic Glass and Their Catalytic Performance
This work reports the formation of nanoprous Pd with tunable pore size and high stability by dealloying Pd30Cu40Ni10P20 metallic glass. The results show that lower dealloying temperature results in smaller pore size while the dealloying duration does not cause distinct change in the porous structure, even at an ambient dealloying temperature. The glassy stru
Mat. Res.. Publicado em: 10/06/2019
-
15. Pastas de ultra-alto desempenho submetidas a cura sob pressão
Resumo A aplicação de pressão em misturas cimentícias tem efeitos positivos no desenvolvimento da microestrutura e nas propriedades mecânicas da matriz endurecida. Contudo, os benefícios têm sido estudados em níveis altos de pressão ou combinados com cura térmica. Este artigo está inserido em uma pesquisa em que foi proposto um equipamento alterna
Ambient. constr.. Publicado em: 10/06/2019
-
16. Study of ZnAl2O4 spinel nanoparticles synthesized using gelatin as organic precursor
Resumo Neste trabalho, pós do espinélio aluminato de zinco foram preparados por um método Pechini modificado, rápido, simples, ambientamento seguro e de baixo custo, utilizando gelatina comercial como precursor orgânico. Os materiais foram calcinados a 600, 700 e 800 °C e caracterizados por análise termogravimétrica, difratometria de raios X (DRX) in
Cerâmica. Publicado em: 06/06/2019
-
17. Water retention curve to analyze soil structure changes due to liming
Abstract: Liming can influence crop growth by altering pore geometry, pore size distribution and water retention characteristics in acid soils. The aim of this work is to determine liming effects on the soil structure based on analysis of water retention data using a cubic spline adjustment function. For that, the authors investigated the effect of three lim
An. Acad. Bras. Ciênc.. Publicado em: 03/06/2019
-
18. Reduction of electric arc furnace dust pellets by mixture containing hydrogen
Abstract The large amount of dust generated in electric arc furnace aligned with its chemical composition makes this dust a potential source of iron in the direct reduction iron process. Thus, the aim of this research is to investigate the reduction of pellets produced with electric arc furnace dust using hydrogen as the reducing agent. The kinetic investiga
REM, Int. Eng. J.. Publicado em: 2019-03
-
19. Production and Characterization of a Silica-Alumina Membrane Using Novel Tubular Freeze-Cast Substrates
Development of new ceramic membranes has recently grown due to its superior thermal and mechanical stability. An interesting approach to manufacture asymmetric membranes is the production of aligned pore structure by the freeze-casting method. The lack of studies involving membrane production with tubular freeze-cast substrates warrants more research. In thi
Mat. Res.. Publicado em: 11/02/2019
-
20. Sequence analysis of the cDNA encoding for SpCTx: a lethal factor from scorpionfish venom ( Scorpaena plumieri )
Abstract Background: Lethal factors are multifunctional oligomeric proteins found in the venomous apparatus of Scorpaeniformes fish. These toxins elicit not only an array of biological responses in vitro but also cardiovascular disorders and strong hemolytic, nociceptive and edematogenic activities in vivo. This work describes the cloning and molecular iden
J. Venom. Anim. Toxins incl. Trop. Dis. Publicado em: 21/09/2018
-
21. Generación de mesoporosidad en zeolitas ZSM-11, BETA e Y por tratamiento alcalino
ABSTRACT Zeolites, Y, ZSM-11 and BETA, widely used in refineries and petrochemical processes, fine chemistry and environmental processes were subjected to an alkaline treatment of desilication, in order to generate mesoporosity in the structure. The process used consisted of treating samples with an aqueous solution of NaOH at 65 ° C for 30 minutes. An exch
Matéria (Rio J.). Publicado em: 19/07/2018
-
22. Estructuras de titanio con gradiente de porosidad – fabricación por el método de partículas espaciadoras y caracterización
ABSTRACT It has proposed the use of porous titanium to reduce the problem of mechanical incompatibility, which occurs between such material used in implants and bone. The pores introduction in titanium decreases its elastic modulus by bringing it closer to that of both cortical and trabecular bones. This paper describes titanium fabrication by powder metallu
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. Evaluación reológica de fluidos de perforación base agua con nanosílice
ABSTRACT Generally, drilling fluids may be defined as fluids with a composition that can assist the generation and removal of cuttings from the borehole to the surface. They are classified according to their base as water based mud (WBM), oil based mud (OBM) or gas. Polymers, densifiers, brines, surfactants, among others are the primary components of drillin
Matéria (Rio J.). Publicado em: 19/07/2018
-
24. Microscopic aspects of electrosensory system on the partially euryhaline lesser guitarfish
ABSTRACT The electrosensory system on elasmobranchs consists of subcutaneous electroreceptor organs known as ampullae of Lorenzini. The present study investigated the ampullae of Lorenzini morphology of the lesser guitarfish Zapteryx brevirostris, using light microscopy and scanning electron microscopy. The pore number found in the ventral skin surface is mu
An. Acad. Bras. Ciênc.. Publicado em: 07/12/2017