Pore Distribution
Mostrando 1-12 de 167 artigos, teses e dissertações.
-
1. How does organic carbon operate in the pore distribution of fine-textured soils?
RESUMO A qualidade do solo é importante para proporcionar uma condição adequada à produção de alimentos, fibras e energia sem alterações significativas no ambiente. Índices de fragilidade do solo têm sido apresentados como indicadores de qualidade do solo (exemplo, porosidade do solo e estoques de carbono), devido à fácil modificação pelo manej
Revista Brasileira de Engenharia Agrícola e Ambiental. Publicado em: 2022
-
2. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
3. Reordering of Depolymerized Silicates as Adsorbents for Large Nitrogen Compounds
The adsorption capacities of two synthesized zeolites (crystalline ZSM-5 and semi-crystalline faujasite Y) for a mixture of indole, quinoline and carbazole were studied. The different samples obtained show different crystalline degree, mesoporosity and Si/Al ratios. The synthesis procedure is based on the simultaneous depolymerization of a mixture of high su
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
4. Effect of nano-silica on Portland cement matrix
Resumo O uso de nanopartículas é uma tendência recente que pode assumir um papel importante para melhorar o desempenho mecânico do cimento Portland. O objetivo deste estudo é avaliar o efeito da nanossílica na matriz de cimento Portland. A distribuição do tamanho das partículas da matriz de cimento Portland foi modificada pela incorporação de 11,
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
5. Water retention capacity in Arenosols and Ferralsols in a semiarid area in the state of Bahia, Brazil
Abstract: One of the most serious problems in areas indicated for irrigation projects in the Brazilian Northeast region is the occurrence of sandy soils, known to have low moisture retention, but occurring in strategic locations in terms of water supply and geographical situation, and which can be used for agricultural purposes. The objective of this study
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
6. Development of Geopolymers for Catalyst Support Applications
A geopolymer with high specific surface area was synthesized from metakaolin, amorphous silica and KOH, in the absence of foaming or saponification agents. The mixture modelling technique was selected for this study among the Design of Experiments tools, using surface area and total pores volume as response variables. The Si/K = 2.46 and Si/Al = 1.37 ratios
Mat. Res.. Publicado em: 25/11/2019
-
7. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
8. SPATIAL VARIABILITY OF THE SATURATED HYDRAULIC CONDUCTIVITY OF SOIL IN COCOA FARMING IN RECÔNCAVO BAIANO
RESUMO O cultivo de cacau irrigado abriu espaço para a produção em solos de Tabuleiros Costeiros. Porém, nesta região, a camada coesa formada próxima da superfície, pode ser um fator limitante para sua produção. O conhecimento dos atributos físico-hídricos do solo possibilitará um manejo eficiente da irrigação em solos coesos. Com isso, objetiv
Rev. Caatinga. Publicado em: 21/10/2019
-
9. X-ray Microtomography to Quantify Morphological Sandstones Properties
Abstract The sandstones of the Furnas Formation in the State of Paraná, south of Brazil, are located in regions with great importance due to the natural heritage found in the rocky forms and associated flora and fauna. This paper presents a detailed analysis of the internal structure of diverse sandstones of the Furnas Formation. X-ray microtomography allow
Braz. arch. biol. technol.. Publicado em: 12/08/2019
-
10. Microstructure and Weibull distribution of rupture strength of clay-talc ceramics
Resumo As propriedades mecânicas das cerâmicas de argila-talco contendo 0 a 10% em massa de talco sinterizadas a 1100 °C foram obtidas por medidas de flexão. Com o valor médio de resistência à flexão de 23,1 MPa, a amostra com 5% de talco (G5) foi a mais forte e apresentou o menor valor de poro interconectado (64%). A dispersão dos valores de resist
Cerâmica. Publicado em: 06/06/2019
-
11. Water retention curve to analyze soil structure changes due to liming
Abstract: Liming can influence crop growth by altering pore geometry, pore size distribution and water retention characteristics in acid soils. The aim of this work is to determine liming effects on the soil structure based on analysis of water retention data using a cubic spline adjustment function. For that, the authors investigated the effect of three lim
An. Acad. Bras. Ciênc.. Publicado em: 03/06/2019
-
12. Physical and geometric non-linear analysis using the finite difference method for one-dimensional consolidation problem
Abstract This article presents a numerical model based on the finite difference method for the physical and geometric non-linear analysis of a one-dimensional consolidation problem regarding a saturated, homogeneous and isotropic soil layer with low permeability and high compressibility. The problem is formulated by adopting the void ratio as the primary var
REM, Int. Eng. J.. Publicado em: 2019-06