Polyurethane
Mostrando 1-12 de 382 artigos, teses e dissertações.
-
1. Bioactive SiO2-K2O-CaO-P2O5 glass-ceramic scaffold prepared using polyurethane foam template
Abstract A glass-ceramic in the SiO2-K2O-CaO-P2O5 quaternary system was prepared by substituting the Na2O component with K2O to avoid Na2Ca2Si3O9 formation upon thermal treatment since this phase decreases apatite formation kinetics on glass material. To form the glass-ceramic, a modified sol-gel method involving solution precipitation, followed by reagents
Cerâmica. Publicado em: 2023
-
2. A Green Analytical Method Using Polyurethane Foam for The Extraction and Determination of Lauryl Ether Sulfate in Personal Care Hygiene Products
A green methodology was developed for the extraction and determination of lauryl ether sulfate in raw materials and commercial liquid soap and shower gel samples. The method avoids the use of organic solvents, offering a simple, cheap, and safe analysis. The methodology is based on the sorption of an ionic pair consisting of a cationic dye and an anionic sur
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Graphite-Polyurethane Composite Electrode Modified with Molecularly Imprinted Polymer for Determination of Diclofenac
A molecularly imprinted polymer (MIP) was prepared using the anti-inflammatory diclofenac (DCF) as a template. A non-imprinted polymer (NIP) was also prepared as a control. These MIP and NIP were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET), revealing a higher porosity in the fir
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Optimization of castor oil polyurethane resin content of OSB panel made of Dendrocalamus asper bamboo
RESUMO Este trabalho apresenta um estudo da otimização do teor de resina poliuretana (PU) a base de óleo de mamona para a produção de painéis de partículas orientadas (OSB) utilizando bambu (Dendrocalamus asper). Para este estudo, painéis OSB de densidade média (650 kg/m3) foram produzidos com diferentes teores de resina (8%, 10%, 12% e 15%). As par
Ciência Florestal. Publicado em: 2022
-
5. SYNTHESIS OF TOLUENE DIISOCYANATE URETHANE PREPOLYMER USING CASTOR OIL AND EVALUATION OF MECHANICAL PROPERTIES
This research is the synthesis of urethane prepolymer cast elastomer which had been produced using toluene diisocyanate and castor oil to replace the synthetic polyol, from petroleum origin, and the evaluation of mechanical properties of the polyurethane. The focus was to replace polyol from petroleum to vegetable material looking for renewable resources. Th
Química Nova. Publicado em: 2022
-
6. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
7. USO DE UM SCANNER DE MESA E ESPUMA DE POLIURETANO PARA QUANTIFICAÇÃO DE FERRO TOTAL EM CÁPSULAS DE SUPLEMENTOS ALIMENTARES
In this work, an alternative and low-cost technique for the extraction and quantification of Fe (total) from food supplements by digital image analysis is shown. The method is based on the complexation of Fe ions in solution with the 8-hydroxyquinoline ligand, forming a colored complex that is extractable from aqueous solution to polyurethane foam, coloring
Quím. Nova. Publicado em: 2021-01
-
8. EFECTO DE LA ADICIÓN DE POLÍMEROS DE CADENA CORTA SOBRE LA ESTRUCTURA QUÍMICA, PROPIEDADES MECÁNICAS, TÉRMICAS Y BIOLÓGICAS DE POLIURETANOS SINTETIZADOS CON DIISOCIANATOS ALIFÁTICOS Y ACEITE DE HIGUERILLA
The objective of this research was to synthesize biocompatible polyurethanes, with suitable mechanical properties to be used as biomaterials. Polyurethanes were synthesized with polyols derived from castor oil and isophorone diisocyanate (IPDI), hexamethylene diisocyanate and 4,4’-methylenebis (cyclohexyl isocyanate), with the addition of polycaprolactone/
Quím. Nova. Publicado em: 2021-01
-
9. Polyurethanes Obtained by Reacting 1,6-HDI with Monoglycerides from Babassu Oil: A DFT Study
This is a density functional theory (DFT)-based (M06) study on the polyurethane formation from 1,6-hexamethylenediisocyanate (1,6-HDI) reacting with the monoacylglycerol obtained from the babassu oil. As the lauric acid is the most abundant fatty acid in the vegetable oil, the 2-monolaurin was chosen to scrutinize the polyurethane formation. An analysis of t
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
10. APLICAÇÃO DA FLUIDODINÂMICA COMPUTACIONAL (CFD) E ANÁLISE DE ACELERANTES NA INVESTIGAÇÃO DE INCÊNDIO
Fire investigation is a complex activity that involves skill, technology, knowledge and science and aims to elucidate fire-related events such as cause, origin, propagation, phenomena, etc. Chemical analysis to verify the presence of foreign substances in that location, as well as the use of fire simulation software are efficient and economical ways to study
Quím. Nova. Publicado em: 2020-05
-
11. CONSTRUCTION AND TESTING OF GLUED LAMINATED TIMBER FRAMES FOR USE IN LAYING POULTRY HOUSES
ABSTRACT This study aimed to present a solution in glued laminated timber to replace frame structures built in reinforced concrete and metallic structure, which are common in agricultural buildings in western Paraná such as those destined to laying poultry house building by agricultural cooperatives. Structural behavior of frames build from Araucaria angust
Eng. Agríc.. Publicado em: 2020-04
-
12. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03