Polypropylene Fibers
Mostrando 13-24 de 56 artigos, teses e dissertações.
-
13. Layer-by-Layer technique employed to construct multitask interfaces in polymer composites
Abstract The properties of glass fiber-reinforced polymer composites are closely related to the fiber-matrix interface. Interfacial treatments to improve mechanical properties are usually limited to enhance interfacial adhesion. In this work, Layer-by-Layer (LbL) technique was introduced to build a novel interface in polymer composites. Different numbers of
Polímeros. Publicado em: 2017-12
-
14. Polypropylene Composites Manufactured from Recycled Carbon Fibers from Aeronautic Materials Waste
Carbon fiber composites are used in several industries such as, aerospace, automotive, civil engineering, sports goods and technical applications due to its low-weight, strength and stiffness. However, the technology of recycling of these thermosetting polymer composites remains an engineering challenge because of their cross-linked structures that impede th
Mat. Res.. Publicado em: 23/10/2017
-
15. Manufacturing and Characterization of Jute/PP Thermoplastic Commingled Composite
The commingled technology is a promising technique for the manufacture of composites reinforced with natural fibers. This study presents the development, processing and basic characterization of a long fiber Jute/Polypropylene (Jute/PP) commingled composite. The Jute/PP fabric was produced in a handloom and the composite was consolidated by compression moldi
Mat. Res.. Publicado em: 19/10/2017
-
16. Biocomposites reinforced with natural fibers:thermal, morphological and mechanical characterization
ABSTRACT This study evaluates the thermal, morphological and mechanical behavior of polypropylene (PP) composite with different natural fibers. The fibers used were wood, sugarcane, bamboo, babassu, coconut and kenaf with and without coupling agent. The thermal, morphological and mechanical properties were evaluated, and a composite PP+GFPP (glass fiber) was
Matéria (Rio J.). Publicado em: 20/07/2017
-
17. Study of Composites Produced with Recovered Polypropylene and Piassava Fiber
This work addresses the use of piassava fibers (PF) as reinforcement for recovered polypropylene (PPr) in the manufacturing of composites. The composites were molded with variable amounts of PF (10, 20 and 30 wt%), with and without maleic anhydride functionalized polypropylene (MAPP) (10 wt%) as compatibilizer. The composites were characterized using mechani
Mat. Res.. Publicado em: 08/12/2016
-
18. Strain Rate Dependent Behavior and Modeling for Compression Response of Hybrid Fiber Reinforced Concrete
Abstract This paper investigates the stress-strain characteristics of Hybrid fiber reinforced concrete (HFRC) composites under dynamic compression using Split Hopkinson Pressure Bar (SHPB) for strain rates in the range of 25 to 125 s-1. Three types of fibers - hooked ended steel fibers, monofilament crimped polypropylene fibers and staple Kevlar fibers were
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
19. Effect of Fiber Treatment Condition and Coupling Agent on the Mechanical and Thermal Properties in Highly Filled Composites of Sugarcane Bagasse Fiber/PP
Abstract This paper reports on a study of highly filled composites of polypropylene (PP) and 75% by weight sugarcane bagasse fiber with and without alkali treatment and with and without coupling agent (SEBS-g-MA). Composites were prepared using a Rheomix600 mixer connected to a HAAKE torque rheometer. The thermal and mechanical behavior of these composites w
Mat. Res.. Publicado em: 10/05/2016
-
20. Polypropylene Composites Reinforced with Biodegraded Sugarcane Bagasse Fibers: Static and Dynamic Mechanical Properties
The present work aimed to study sugarcane bagasse fibers pre-treated with fungi and using NaOH/ anthraquinone (AQ) in chemical pulping processes for applications in composite materials. Bagasse was decayed with 250 mg of Ceriporiopsis subvermispora inoculum in a 20 L bioreactor. After that, samples were submitted to similar conditions of decaying without ino
Mat. Res.. Publicado em: 12/02/2016
-
21. The Recycling of Sugarcane Fiber/Polypropylene Composites
Mechanical recycling is utilized to reuse waste and obtain other plastic products via the reprocessing of a material in industrial equipment. Natural fiber composites have become more popular in recent years; however, these composites' mechanical behavior remains less well-understood than single polymers’ behavior after recycling. Therefore, the objective
Mat. Res.. Publicado em: 2015-08
-
22. Mechanical Properties Analysis of Polypropylene Biocomposites Reinforced with Curaua Fiber
Over the last few years, great interest has been shown by researchers in presenting alternative proposals for the design and fabrication of materials with good mechanical properties and low cost for a variety of applications. With this in mind, a study was carried out on the addition of curaua fibers in a polypropylene (PP) matrix. These were extruded in the
Mat. Res.. Publicado em: 2015-08
-
23. Fracture behavior of polymeric fiber reinforced lightweight structural concrete
A study has been made of the effect of short randomly dispersed polypropylene fibers on the fracture behavior of lightweight structural concrete. Using unnotched and precracked beams subjected to bend loading, it was possible to determine the toughness factor TF and to estimate specific J integral parameters, namely J IC and J MAX corresponding to the onset
Mat. Res.. Publicado em: 2014-12
-
24. Prediction of energy absorption capability in fiber reinforced self-compacting concrete containing nano-silica particles using artificial neural network
The main objective of the present work is to utilize feedforward multi-layer perceptron (MLP) type of artificial neural networks (ANN) to find the combined effect of nano-silica and different fibers (steel, polypropylene, glass) on the toughness, flexural strength and fracture energy of concrete is evaluated.For this purpose, 40 mix plot including 4 series A
Lat. Am. j. solids struct.. Publicado em: 2014-11